Formation of Diffusion Layer on Ti-6Al-4V Alloy during Longtime Friction with Al
Open Access
Abstract
Elements’ diffusion between Ti-6Al-4V alloy and Al in the process of sliding was investigated from 400 °C to 600 °C. The results showed that the atoms were diffused at the Ti-6Al-4V/Al interface. When sliding at 400 °C and 500 °C, no intermetallic compound was detected on the surface of Ti-6Al-4V alloy. When sliding at 600 °C, intermetallic TiAl3 was formed and grew on the surface of Ti-6Al-4V alloy. The diffusion thickness of Al atoms on the surface of Ti-6Al-4V alloy increased with increasing time and temperature. The diffusion kinetic equation of Al atoms on the surface of Ti-6Al-4V alloy was successfully established. The diffusion activation energy of Al atoms in the sliding process was calculated to be 28.22 kJ·mol−1 and the dynamic index n was 0.5. The diffusion growth of Al atoms was controlled by normal parabolic law with time.Keywords
Funding Information
- National Natural Science Foundation of China (51471159, 51671180)
- National Key R&D Program of China (2018YFC1902401)
This publication has 14 references indexed in Scilit:
- Tribological properties of Al/PI composites sliding with Ti-6Al-4V alloyMaterials Research Express, 2019
- Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and bladesWear, 2018
- Effect of thermal–physical properties on the abradability of seal coating under high-speed rubbing conditionWear, 2018
- Tool Wear Characteristics and Effect on Microstructure in Ti-6Al-4V Friction Stir Welded JointsMetals, 2016
- Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt JointMetals, 2016
- Preparation and characterizations of nickel-based composite coatings with self-lubricating property at elevated temperaturesSurface and Coatings Technology, 2016
- Influence of probe offset distance on interfacial microstructure and mechanical properties of friction stir butt welded joint of Ti6Al4V and A6061 dissimilar alloysMaterials & Design (1980-2015), 2014
- Dissimilar friction stir welding of Ti–6Al–4V alloy and aluminum alloy employing a modified butt joint configuration: Influences of process variables on the weld interfaces and tensile propertiesMaterials & Design (1980-2015), 2014
- High speed wear testing of an abradable coatingWear, 2012
- Friction drilling of cast metalsInternational Journal of Machine Tools and Manufacture, 2006