An Investigation into the Stages of Alloy 625 Crevice Corrosion in an Ocean Water Environment: Initiation, Propagation and Repassivation in a Remote Crevice Assembly
Open Access
- 19 June 2019
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (11) , C3431-C3442
Abstract
In this paper we investigate the initiation, propagation and repassivation of alloy 625 crevice corrosion in ASTM artificial ocean water using a remote crevice assembly. This assembly was equipped to monitor crevice corrosion current at a constant potential and consisted of two alloy 625 washers fastened together at a set torque (gap) with an alloy 625 nut and bolt. Applied potential controlled initiation time with higher potentials having a shorter induction period. Independent of applied potential, crevice corrosion always initiated farthest from the mouth of the crevice, at the tip. This initial attack was shallow, consistent with transpassive dissolution even though the applied potential was in the passive region. As time progressed, an active corrosion front moved toward the mouth and the crevice current increased. At a critical distance from the mouth, forward movement stopped, and the damage changed to deep trenching. The crevice repassivation potential, as determined using the Tsujikawa-Hisamatsu method, was a function of the position of the active front with depths closer to the mouth having more positive repassivation potentials. These results are discussed within the context of a three-stage mechanism for crevice initiation and propagation in alloy 625.Keywords
This publication has 42 references indexed in Scilit:
- Prediction of Critical Crevice Potentials for Ni-Cr-Mo Alloys in Simulated Crevice Solutions as a Function of Molybdenum ContentCorrosion, 2010
- Effect of Potential on Crevice Corrosion Kinetics of Alloy 22Corrosion, 2010
- Effects of Test Methods on Crevice Corrosion Repassivation Potential Measurements of Alloy 22Corrosion, 2009
- Crevice Corrosion Repassivation of Alloy 22 in Aggressive EnvironmentsCorrosion, 2008
- Role of Metastable Pitting in Crevices on Crevice Corrosion Stabilization in Alloys 625 and 22Corrosion, 2005
- Crevice Corrosion of Alloy 625 in Natural SeawaterCorrosion, 2003
- Crevice Corrosion Propagation on Alloy 625 and Alloy C276 in Natural SeawaterCorrosion, 1997
- The role of electrode potential distribution in corrosion processesMaterials Science and Engineering: A, 1995
- Crevice Corrosion of Alloy 625 in Chlorinated ASTM Artificial Ocean WaterCorrosion, 1994
- Numerical Simulation of Crevice Corrosion of Stainless Steels and Nickel Alloys in Chloride SolutionsCorrosion, 1990