Processing and properties of CuAl2 intermetallic coatings
Authors:
- 1 March 2017
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 33 (3) , 186-191
Abstract
CuAl2 intermetallic powders were consolidated using an atmospheric plasma spraying process. Based on X-ray diffractometry results, no phase change occurred during thermal spraying. The investigation of optical micrographs showed that about 7% porosity was present in the microstructure of the coatings. The coatings showed hardness value up to 575 HV(50 g). The polarisation tests and electrochemical spectroscopy measurements were utilised for electrochemical investigation of the coatings in 1 M H2SO4 and 3.5% NaCl media. In H2SO4 environment, the coated and uncoated samples showed similar corrosion rates. However, the coating showed a lower corrosion rate than the substrate in NaCl solution by an order of magnitude. Corrosion of the steel substrate occurred in the NaCl solution, no corrosion was observed in the H2SO4. GRAPHICAL ABSTRACTKeywords
This publication has 15 references indexed in Scilit:
- Investigation of reactive phase formation in the Al–Cu thin film systemsSurface and Coatings Technology, 2012
- Behavior of aluminum oxide, intermetallics and voids in Cu–Al wire bondsActa Materialia, 2011
- Structurally complex metallic coatings in the Al-Cu system and their orientation relationships with an icosahedral quasicrystalJournal of Materials Research, 2010
- On the electrochemical dealloying of Al-based alloys in a NaCl aqueous solutionPhysical Chemistry Chemical Physics, 2009
- The roles of Al2Cu and of dendritic refinement on surface corrosion resistance of hypoeutectic Al–Cu alloys immersed in H2SO4Journal of Alloys and Compounds, 2007
- Effect of Annealing on the Interfacial Structure of Aluminum-Copper JointsMATERIALS TRANSACTIONS, 2007
- CuAl2 revisited: Composition, crystal structure, chemical bonding, compressibility and Raman spectroscopyJournal of Solid State Chemistry, 2006
- Fracture toughness of intermetallic compacts consolidated from nanocrystalline powdersMaterials Science and Engineering: A, 2001
- Enhanced kinetics of diffusion coating of aluminium on copper by boundary diffusionJournal of Materials Science Letters, 1993
- Low temperature resistivity of thin film and bulk samples of CuAl2 and Cu9Al4Thin Solid Films, 1981