Вдосконалення процесу обробки абразивно-повітряним струменем робочих поверхонь лопаток моноколіс закритого типу на основі даних чисельного моделювання за допомогою програмного комплексу ANSYS CFX
Open Access
- 3 October 2023
- journal article
- research article
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 5,p. 64-77
Abstract
The correct choice of technological modes can guarantee the results of inkjet processing. However, the need to consider a significant amount of input data, namely the parameters of the equipment, the abrasive jet, the physical and mechanical properties of the material, and the shape of the processed product surfaces, as well as the lack of clear recommendations and technological data, significantly complicates the process. The subject of this study is the process of processing the surface of closed-type blades with an abrasive-air jet made in one piece with a disk of the "monowheel" type, using the SLM technology of Inconel 718 alloy. The goal of this task is to model the jet processing of closed-type monowheel blades using the ANSYS CFX finite element analysis software system. This article presents the results of numerical modeling of the surface treatment of closed turbine blades and the identification of technological factors that affect the roughness and quality of the surface of the compressed air environment on samples of closed turbine blades made of Inconel 718 alloy. The task: to develop a research plan and study the processing process and accompanying phenomena occurring during processing using the finite element method using the ANSYS CFX software complex, considering the physical and mechanical properties of the abrasive often, the environment, and the processed material. The following results were obtained: during mathematical modeling using the finite element method, data were obtained for sixteen calculation variants of blade surface treatment, from which the most optimal one was chosen, which provides the largest contact area of abrasive particles and their uniform interaction with the processing surface. In addition, during the research, the impact of "unevenness of erosion" and the graininess of abrasive materials on the quality of the treated surface was studied. Further analysis of the data of the research results made it possible to find ways to solve these tasks, which was confirmed by the control and verification results. Conclusions. The scientific novelty of the obtained results is as follows: for the first time, the processing of closed turbine blades made in one piece with a "monowheel" type disk and obtained by the additive method with an abrasive air jet was investigated. The obtained research data were used as a basis for developing a real route technological process for processing closed-type turbine blades manufactured using the additive method.Keywords
This publication has 9 references indexed in Scilit:
- Study of the Polishing Characteristics by Abrasive Flow Machining with a Rotating DeviceProcesses, 2022
- Diamond abrasive based cutting tool for processing of advanced engineering materials: a reviewMaterials Today: Proceedings, 2020
- Post-processing effects on the surface characteristics of Inconel 718 alloy fabricated by selective laser melting additive manufacturingProgress in Additive Manufacturing, 2019
- Nano-finishing Studies Using Elastically Dominant Polymers Blend Abrasive Flow Finishing MediumProcedia CIRP, 2018
- Hybrid Abrasive Flow Machining for Nano Finishing - A ReviewMaterials Today: Proceedings, 2017
- Simulation of surface generated during abrasive flow finishing of Al/SiCp-MMC using neural networksThe International Journal of Advanced Manufacturing Technology, 2012
- Current status and application of abrasive flow finishing processes: A reviewProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2009
- Erosion and Deposition in TurbomachineryJournal of Propulsion and Power, 2006
- Experimental investigations into abrasive flow machining (AFM)International Journal of Machine Tools and Manufacture, 2000