Microstructure and mechanical properties of friction welded dissimilar AISI 1040 and AISI 304 steels
Authors:
- 23 December 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (2) , 199-210
Abstract
The development of technology and the increase in needs have affected the manufacturing methods. It is of great importance to combine different materials to reduce costs and increase performance and design flexibility. Different parts can be joined by friction welding, which is a solid-state welding method. In this study, the weldability of AISI 304 stainless steel and AISI 1040 carbon steel with friction welding has been investigated. During welding, the temperature changes of the welds were measured. In addition to SEM, XRD, and EDS tests to examine the microstructure of the welds, tensile strength tests and hardness measurements were also performed to find out their mechanical characteristics. According to the analysis and test results, the best welding parameters were observed in the weld sample S6. As a result of this experimental study, it was seen that these different steels can be joined by friction welding.Keywords
This publication has 24 references indexed in Scilit:
- Effect of ferrite and grain boundary characteristics on corrosion properties of thermal simulated 316 L heat affected zoneCorrosion Science, 2023
- Investigation of Microstructural and Mechanical Properties of Dissimilar Metal Weld Between AISI 420 and AISI 1018 STEELSArabian Journal for Science and Engineering, 2021
- Characterization of Metallurgical and Mechanical Properties of Thixowelded AISI D2 and AISI 304 SteelsJournal of Materials Engineering and Performance, 2020
- Ultra-high strength martensitic 420 stainless steel with high ductilityAdditive Manufacturing, 2019
- Efficiency of dissimilar friction welded 1045 medium carbon steel and 316L austenitic stainless steel jointsJournal of Materials Research and Technology, 2019
- Effect of the roughness produced by plasma nitrocarburizing on corrosion resistance of AISI 304 austenitic stainless steelJournal of Materials Research and Technology, 2019
- The effects of process parameters for joining of AISI 1010-Cu alloys by friction weldedInternational Journal of Steel Structures, 2015
- Spark Plasma Welding of Austenitic Stainless Steel AISI 304L to Commercially Pure TitaniumTransactions of the Indian Institute of Metals, 2015
- Low-cost and high sensitively microcontroller based control unit for a friction welding machineJournal of Materials Processing Technology, 2007
- Simulation of friction welding using a developed computer programJournal of Materials Processing Technology, 2004