Enhanced Passivation of Boron‐Doped Polysilicon Passivated Contacts With a Single‐Sided J 0 of 2.8 fA/cm 2 by Dual‐Layer Silicon Oxide Structure
Authors:
Abstract
Boron (B)‐induced interface defects remain a key bottleneck that limits the passivation quality of p‐type tunnel oxide passivating contacts (TOPCon), thereby constraining the efficiency of back‐contact TOPCon (TBC) solar cells. Here, we introduce a dual‐layer silicon oxide (SiO x ) design that forms a SiO x /p + poly‐Si/SiO x /p ++ poly‐Si passivation structure. The additional SiO x layer effectively mitigates interlayer stress, preventing blistering during high‐temperature annealing, and increases interfacial hydrogen concentration to suppress defect states. Through systematic optimization of the preparation and annealing conditions of the outer SiO x layer, the p‐type TOPCon structures achieve outstanding passivation on n‐type wafers, with a single‐sided recombination current density ( J 0,s ) of 2.8 fA/cm 2 and an implied open‐circuit voltage ( iV oc ) of 741 mV. This represents one of the best results reported to date, surpassing the current industrial records. Compared with the previous single‐layer SiO x designs, this configuration delivers a substantial improvement of passivation while simultaneously enabling a reduced poly‐Si thickness. Numerical simulations further demonstrate a 0.18% absolute efficiency gain in TBC cells with the dual‐layer structure compared to single‐layer configuration. This work demonstrates that a dual‐layer SiO x architecture effectively lowers interface defect density and enhances p‐type TOPCon passivation, underscoring its significant potential for industrial application in high‐efficiency TBC cells.Keywords
Funding Information
- China Postdoctoral Science Foundation (GZB20250140)
- Key Research and Development Program of Zhejiang Province (2024C01055)
- Key Research and Development Program of Zhejiang Province (2021C01006)
- National Natural Science Foundation of China (62474178)
This publication has 39 references indexed in Scilit:
- Achieving Excellent Surface Passivation with J 0,s Less Than 0.5 fA cm −2 Utilizing a Carbon‐Incorporated Intrinsic Polysilicon‐Based Tunnel Oxide Passivating Contact StructureSmall Methods, 2025
- Solar Cell Efficiency Tables (Version 66)Progress in Photovoltaics: Research and Applications, 2025
- Boron‐Doped Polysilicon Passivating Contacts Achieving a Single‐Sided J0 of 4.0 fA/cm2 Through a Two‐Step Oxidation ProcessProgress in Photovoltaics: Research and Applications, 2024
- Systematic Modeling and Optimization for High‐Efficiency Interdigitated Back‐Contact Crystalline Silicon Solar CellsEnergy Technology, 2024
- Passivating Contacts for Crystalline Silicon Solar Cells: An Overview of the Current Advances and Future PerspectivesAdvanced Energy Materials, 2024
- Effects of PECVD preparation conditions and microstructures of boron-doped polysilicon films on surface passivation of p-type tunnel oxide passivated contactsMaterials Science in Semiconductor Processing, 2022
- Silicon‐based passivating contacts: The TOPCon routeProgress in Photovoltaics: Research and Applications, 2021
- Improvement of Surface Passivation of Tunnel Oxide Passivated Contact Structure by Thermal Annealing in Mixture of Water Vapor and Nitrogen EnvironmentSolar RRL, 2019
- 26.1%‐efficient POLO‐IBC cells: Quantification of electrical and optical loss mechanismsProgress in Photovoltaics: Research and Applications, 2019
- On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfacesPhysica Status Solidi (a), 2017