Synergistic Effects of Graphene and Ammonium Polyphosphate Modified with Vinyltrimethoxysilane on the Properties of High-Impact Polystyrene Composites
Open Access
Abstract
Ammonium polyphosphate (APP) was modified with a silane coupling agent (vinyltrimethoxysilane, Si-171), and then the synergistic flame retarding effect of graphene and surface-modified APP (APP@Si-171) on high-impact polystyrene (HIPS) was investigated. Surface modification and thermal stability characterization of APP were analyzed by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectrometer (EDS), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The results showed that surface-modified APP (APP@Si-171) exhibited significantly better dispersion and less agglomeration tendencies compared with pure APP. A series of target HIPS composites containing different mass fractions of the two flame retardants were prepared by melt blending. TGA and cone calorimeter tests (CCT) were conducted to quantitatively investigate the thermal and flammability properties of the composites, respectively. Results from TGA and CCT demonstrated that the addition of the flame retardants delayed the onset and peak temperatures in differential thermogravimetry (DTG) curves and weakened the peak heat release rate (PHRR) and total heat release (THR). Moreover, the synergistic effect index (SE) was employed to quantify the synergistic behavior between the two fillers, and the results showed that APP@Si-171 and graphene had a synergistic effect on improving the thermal stability and flame retardancy of HIPS.Keywords
Funding Information
- National Natural Science Foundation of China (51974165)
- Natural Science Fund of Jiangsu Higher Education Institutions of China (18KJA620002)
This publication has 33 references indexed in Scilit:
- Suppression of wood dust explosion by ultrafine magnesium hydroxideJournal of Hazardous Materials, 2019
- Monitoring the degradation of physical properties and fire hazards of high-impact polystyrene composite with different ageing time in natural environmentsJournal of Hazardous Materials, 2018
- Preparation and properties of an efficient smoke suppressant and flame‐retardant agent for thermoplastic polyurethanePolymers for Advanced Technologies, 2017
- A review of application of ammonium polyphosphate as intumescent flame retardant in thermoplastic compositesComposites Part B: Engineering, 2016
- Improvement of the Compatibilization of High-Impact Polystyrene/Magnesium Hydroxide Composites with Partially Sulfonated Polystyrene as Macromolecular CompatibilizersIndustrial & Engineering Chemistry Research, 2012
- Synergistic effect of ammonium polyphosphate and expandable graphite on flame‐retardant properties of acrylonitrile‐butadiene‐styreneJournal of Applied Polymer Science, 2012
- Influence of ammonium polyphosphate modified with 3‐(methylacryloxyl) propyltrimethoxy silane on mechanical and thermal properties of wood flour–polypropylene compositesJournal of Applied Polymer Science, 2011
- Effects of the content of silane coupling agent KH‐560 on the properties of LLDPE/magnesium hydroxide compositesJournal of Applied Polymer Science, 2010
- Effects of polystyrene-encapsulated magnesium hydroxide on rheological and flame-retarding properties of HIPS compositesPolymer Degradation and Stability, 2006
- Flame Retardant Mechanisms of Red Phosphorus and Magnesium Hydroxide in High Impact PolystyreneMacromolecular Chemistry and Physics, 2004