Juncheng Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Juncheng Jiang has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Yong Pan
Nanjing Tech University
5 shared publications Rui Wang
School of Urban Construction and Safety Engineering, Nanjing University of Technology, Mail box 186, No.5 Xinmofan Road, Nanjing 210009, China
2 shared publications- Xianke Ji
Jiangsu Key Laboratory of Hazardous Chemicals Safety and Control, College of Safety Science and Engineering, Nanjing Tech University, Nanjing 210009, China
2 shared publications Yong Pan
School of Urban Construction and Safety Engineering, Nanjing University of Technology, Mail box 186, No.5 Xinmofan Road, Nanjing 210009, China
2 shared publications- Beilei Yuan
Jiangsu Key Laboratory of Hazardous Chemicals Safety and Control, College of Safety Science and Engineering, Nanjing Tech University, Nanjing 210009, China
1 shared publication - Chennan Mao
School of Mechanical Engineering, Tongji University, Shanghai 201804, China
1 shared publication
Latest Publications
- Open Access
Thermal Stability and Decomposition Kinetics of 1-Alkyl-2,3-Dimethylimidazolium Nitrate Ionic Liquids: TGA and DFT Study
The thermal stability and decomposition kinetics analysis of 1-alkyl-2,3-dimethylimidazole nitrate ionic liquids with different alkyl chains (ethyl, butyl, hexyl, octyl and decyl) were investigated by using isothermal and nonisothermal thermogravimetric analysis combined with thermoanalytical kinetics calculations (Kissinger, Friedman and Flynn-Wall-Ozawa) and density functional theory (DFT) calculations. Isothermal experiments were performed in a nitrogen atmosphere at 240, 250, 260 and 270 °C. In addition, the nonisothermal experiments were carried out in nitrogen and air atmospheres from 30 to 600 °C with heating rates of 5, 10, 15, 20 and 25 °C/min. The results of two heating modes, three activation energy calculations and density functional theory calculations consistently showed that the thermal stability of 1-alkyl-2,3-dimethylimidazolium nitrate ionic liquids decreases with the increasing length of the alkyl chain of the substituent on the cation, and then the thermal hazard increases. This study could provide some guidance for the safety design and use of imidazolium nitrate ionic liquids for engineering.
Open AccessThermal Stability and Decomposition Kinetics of 1-Alkyl-2,3-Dimethylimidazolium Nitrate Ionic Liquids: TGA and DFT Study
The thermal stability and decomposition kinetics analysis of 1-alkyl-2,3-dimethylimidazole nitrate ionic liquids with different alkyl chains (ethyl, butyl, hexyl, octyl and decyl) were investigated by using isothermal and nonisothermal thermogravimetric analysis combined with thermoanalytical kinetics calculations (Kissinger, Friedman and Flynn-Wall-Ozawa) and density functional theory (DFT) calculations. Isothermal experiments were performed in a nitrogen atmosphere at 240, 250, 260 and 270 °C. In addition, the nonisothermal experiments were carried out in nitrogen and air atmospheres from 30 to 600 °C with heating rates of 5, 10, 15, 20 and 25 °C/min. The results of two heating modes, three activation energy calculations and density functional theory calculations consistently showed that the thermal stability of 1-alkyl-2,3-dimethylimidazolium nitrate ionic liquids decreases with the increasing length of the alkyl chain of the substituent on the cation, and then the thermal hazard increases. This study could provide some guidance for the safety design and use of imidazolium nitrate ionic liquids for engineering.
- Open Access
Nano-SAR Modeling for Predicting the Cytotoxicity of Metal Oxide Nanoparticles to PaCa2
Nowadays, the impact of engineered nanoparticles (NPs) on human health and environment has aroused widespread attention. It is essential to assess and predict the biological activity, toxicity, and physicochemical properties of NPs. Computation-based methods have been developed to be efficient alternatives for understanding the negative effects of nanoparticles on the environment and human health. Here, a classification-based structure-activity relationship model for nanoparticles (nano-SAR) was developed to predict the cellular uptake of 109 functionalized magneto-fluorescent nanoparticles to pancreatic cancer cells (PaCa2). The norm index descriptors were employed for describing the structure characteristics of the involved nanoparticles. The Random forest algorithm (RF), combining with the Recursive Feature Elimination (RFE) was employed to develop the nano-SAR model. The resulted model showed satisfactory statistical performance, with the accuracy (ACC) of the test set and the training set of 0.950 and 0.966, respectively, demonstrating that the model had satisfactory classification effect. The model was rigorously verified and further extensively compared with models in the literature. The proposed model could be reasonably expected to predict the cellular uptakes of nanoparticles and provide some guidance for the design and manufacture of safer nanomaterials.
Open AccessNano-SAR Modeling for Predicting the Cytotoxicity of Metal Oxide Nanoparticles to PaCa2
Nowadays, the impact of engineered nanoparticles (NPs) on human health and environment has aroused widespread attention. It is essential to assess and predict the biological activity, toxicity, and physicochemical properties of NPs. Computation-based methods have been developed to be efficient alternatives for understanding the negative effects of nanoparticles on the environment and human health. Here, a classification-based structure-activity relationship model for nanoparticles (nano-SAR) was developed to predict the cellular uptake of 109 functionalized magneto-fluorescent nanoparticles to pancreatic cancer cells (PaCa2). The norm index descriptors were employed for describing the structure characteristics of the involved nanoparticles. The Random forest algorithm (RF), combining with the Recursive Feature Elimination (RFE) was employed to develop the nano-SAR model. The resulted model showed satisfactory statistical performance, with the accuracy (ACC) of the test set and the training set of 0.950 and 0.966, respectively, demonstrating that the model had satisfactory classification effect. The model was rigorously verified and further extensively compared with models in the literature. The proposed model could be reasonably expected to predict the cellular uptakes of nanoparticles and provide some guidance for the design and manufacture of safer nanomaterials.
- Open Access
Synergistic Effects of Graphene and Ammonium Polyphosphate Modified with Vinyltrimethoxysilane on the Properties of High-Impact Polystyrene Composites
Ammonium polyphosphate (APP) was modified with a silane coupling agent (vinyltrimethoxysilane, Si-171), and then the synergistic flame retarding effect of graphene and surface-modified APP (APP@Si-171) on high-impact polystyrene (HIPS) was investigated. Surface modification and thermal stability characterization of APP were analyzed by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectrometer (EDS), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The results showed that surface-modified APP (APP@Si-171) exhibited significantly better dispersion and less agglomeration tendencies compared with pure APP. A series of target HIPS composites containing different mass fractions of the two flame retardants were prepared by melt blending. TGA and cone calorimeter tests (CCT) were conducted to quantitatively investigate the thermal and flammability properties of the composites, respectively. Results from TGA and CCT demonstrated that the addition of the flame retardants delayed the onset and peak temperatures in differential thermogravimetry (DTG) curves and weakened the peak heat release rate (PHRR) and total heat release (THR). Moreover, the synergistic effect index (SE) was employed to quantify the synergistic behavior between the two fillers, and the results showed that APP@Si-171 and graphene had a synergistic effect on improving the thermal stability and flame retardancy of HIPS.
Open AccessSynergistic Effects of Graphene and Ammonium Polyphosphate Modified with Vinyltrimethoxysilane on the Properties of High-Impact Polystyrene Composites
Ammonium polyphosphate (APP) was modified with a silane coupling agent (vinyltrimethoxysilane, Si-171), and then the synergistic flame retarding effect of graphene and surface-modified APP (APP@Si-171) on high-impact polystyrene (HIPS) was investigated. Surface modification and thermal stability characterization of APP were analyzed by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectrometer (EDS), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The results showed that surface-modified APP (APP@Si-171) exhibited significantly better dispersion and less agglomeration tendencies compared with pure APP. A series of target HIPS composites containing different mass fractions of the two flame retardants were prepared by melt blending. TGA and cone calorimeter tests (CCT) were conducted to quantitatively investigate the thermal and flammability properties of the composites, respectively. Results from TGA and CCT demonstrated that the addition of the flame retardants delayed the onset and peak temperatures in differential thermogravimetry (DTG) curves and weakened the peak heat release rate (PHRR) and total heat release (THR). Moreover, the synergistic effect index (SE) was employed to quantify the synergistic behavior between the two fillers, and the results showed that APP@Si-171 and graphene had a synergistic effect on improving the thermal stability and flame retardancy of HIPS.
- Open Access
- 27 April 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (9) , 2084
Prediction of the Auto-Ignition Temperatures of Binary Miscible Liquid Mixtures from Molecular Structures
A quantitative structure-property relationship (QSPR) study is performed to predict the auto-ignition temperatures (AITs) of binary liquid mixtures based on their molecular structures. The Simplex Representation of Molecular Structure (SiRMS) methodology was employed to describe the structure characteristics of a series of 132 binary miscible liquid mixtures. The most rigorous “compounds out” strategy was employed to divide the dataset into the training set and test set. The genetic algorithm (GA) combined with multiple linear regression (MLR) was used to select the best subset of SiRMS descriptors, which significantly contributes to the AITs of binary liquid mixtures. The result is a multilinear model with six parameters. Various strategies were employed to validate the developed model, and the results showed that the model has satisfactory robustness and predictivity. Furthermore, the applicability domain (AD) of the model was defined. The developed model could be considered as a new way to reliably predict the AITs of existing or new binary miscible liquid mixtures, belonging to its AD.
- 27 April 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (9) , 2084
Open AccessPrediction of the Auto-Ignition Temperatures of Binary Miscible Liquid Mixtures from Molecular Structures
A quantitative structure-property relationship (QSPR) study is performed to predict the auto-ignition temperatures (AITs) of binary liquid mixtures based on their molecular structures. The Simplex Representation of Molecular Structure (SiRMS) methodology was employed to describe the structure characteristics of a series of 132 binary miscible liquid mixtures. The most rigorous “compounds out” strategy was employed to divide the dataset into the training set and test set. The genetic algorithm (GA) combined with multiple linear regression (MLR) was used to select the best subset of SiRMS descriptors, which significantly contributes to the AITs of binary liquid mixtures. The result is a multilinear model with six parameters. Various strategies were employed to validate the developed model, and the results showed that the model has satisfactory robustness and predictivity. Furthermore, the applicability domain (AD) of the model was defined. The developed model could be considered as a new way to reliably predict the AITs of existing or new binary miscible liquid mixtures, belonging to its AD.
- Open Access
Prediction of Lower Flammability Limits for Binary Hydrocarbon Gases by Quantitative Structure—Property Relationship Approach
The lower flammability limit (LFL) is one of the most important parameters for evaluating the fire and explosion hazards of flammable gases or vapors. This study proposed quantitative structure−property relationship (QSPR) models to predict the LFL of binary hydrocarbon gases from their molecular structures. Twelve different mixing rules were employed to derive mixture descriptors for describing the structures characteristics of a series of 181 binary hydrocarbon mixtures. Genetic algorithm (GA)-based multiple linear regression (MLR) was used to select the most statistically effective mixture descriptors on the LFL of binary hydrocarbon gases. A total of 12 multilinear models were obtained based on the different mathematical formulas. The best model, issued from the norm of the molar contribution formula, was achieved as a six-parameter model. The best model was then rigorously validated using multiple strategies and further extensively compared to the previously published model. The results demonstrated the robustness, validity, and satisfactory predictivity of the proposed model. The applicability domain (AD) of the model was defined as well. The proposed best model would be expected to present an alternative to predict the LFL values of existing or new binary hydrocarbon gases, and provide some guidance for prioritizing the design of safer blended gases with desired properties.
Open AccessPrediction of Lower Flammability Limits for Binary Hydrocarbon Gases by Quantitative Structure—Property Relationship Approach
The lower flammability limit (LFL) is one of the most important parameters for evaluating the fire and explosion hazards of flammable gases or vapors. This study proposed quantitative structure−property relationship (QSPR) models to predict the LFL of binary hydrocarbon gases from their molecular structures. Twelve different mixing rules were employed to derive mixture descriptors for describing the structures characteristics of a series of 181 binary hydrocarbon mixtures. Genetic algorithm (GA)-based multiple linear regression (MLR) was used to select the most statistically effective mixture descriptors on the LFL of binary hydrocarbon gases. A total of 12 multilinear models were obtained based on the different mathematical formulas. The best model, issued from the norm of the molar contribution formula, was achieved as a six-parameter model. The best model was then rigorously validated using multiple strategies and further extensively compared to the previously published model. The results demonstrated the robustness, validity, and satisfactory predictivity of the proposed model. The applicability domain (AD) of the model was defined as well. The proposed best model would be expected to present an alternative to predict the LFL values of existing or new binary hydrocarbon gases, and provide some guidance for prioritizing the design of safer blended gases with desired properties.
- 31 January 2011
- Published by Elsevier in Journal of Loss Prevention in the Process Industries
- Vol. 24 (1) , 105-110
Life extension reliability analysis of decommissioned transportable seamless steel gas cylinders: A case study
- 31 January 2011
- Published by Elsevier in Journal of Loss Prevention in the Process Industries
- Vol. 24 (1) , 105-110
Life extension reliability analysis of decommissioned transportable seamless steel gas cylinders: A case study
- 13 April 2009
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 48 (10) , 5064-5069
Prediction of the Upper Flammability Limits of Organic Compounds from Molecular Structures
- 13 April 2009
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 48 (10) , 5064-5069
Prediction of the Upper Flammability Limits of Organic Compounds from Molecular Structures