Abstract
Effective joining techniques are fundamental in the development of superconducting magnets utilizing YBCO coated conductors or tapes. In this study, the electromechanical performance of YBCO joints under axial tensile stress, fabricated by a nano silver low-temperature sintering method, were comprehensively investigated via varying overlap lengths and nano silver coating thickness. For a single joint, resistance remains constant under increasing loads and reduces when extending the lapped length and rises with thickening of the nano silver paste. The joints with lapped lengths of 2 and 3 cm exhibit larger tensile stress of 500 MPa, comparable to that of an unjoined single tape. However, a thicker nano paste coating thickness of 100 and 150 μ m results in a decrease in joints tensile stress to 450 MPa. Initially, the joints demonstrate lower I c values than the original tape under a zero-force state. By thickening the silver stabilizer, the stress concentration at the joint edges was suppressed and I c was successfully recovered while maintaining the previously achieved tensile stress levels.
Funding Information
  • Natural Science Foundation of Sichuan Province (2025ZNSFSC0359)
  • Analysis and Testing Center of Southwest Jiaotong University

This publication has 22 references indexed in Scilit: