Influence of the Processing Conditions on the Mechanical Performance of Sustainable Bio-Based PLA Compounds
Open Access
- 25 September 2020
- Vol. 12 (10) , 2197
Abstract
Cellulose/PLA-based blends (up to 77 vol./vol.% of the added fibers) for applications in extrusion-based technology were realized in an internal mixer by setting different operating conditions. In particular, both the mixing time and temperature were increased in order to simulate a recycling operation (10 or 25 min, 170 or 190 °C) and gain information on the potential reuse of the developed systems. The torque measurements during the compound’s preparation, and the compound’s mechanical tensile features, both in the static and dynamic mode, were evaluated for each investigated composition. The final results confirmed a reduction of the torque trend over time for the PLA matrix, which was attributed to a possible degradation mechanism, and confirmed by infrared spectroscopy. The mechanical behaviour of the pristine polymer changed from elastoplastic to brittle, with a significant loss in ductility going from the lower mixing temperatures up to the higher ones for the longest time. Through the addition of cellulose fibers into the composite systems, a higher stabilization of the torque in the time and an improvement in the mechanical performance were always verified compared to the neat PLA, with a maximum increase in the Young modulus (+100%) and the tensile strength (+57%), and a partial recovery of the ductility.Keywords
This publication has 42 references indexed in Scilit:
- Thermal stability and thermo-mechanical properties of hemp-high density polyethylene composites: Effect of two different chemical modificationsComposites Part B: Engineering, 2013
- Thermal and structural effects of poly(vinyl chloride)/(wood flour) compound gelation in the Brabender mixerJournal of Vinyl and Additive Technology, 2011
- Can nanoparticles really enhance thermal stability of polymers? Part II: An overview on thermal decomposition of polycondensation polymersThermochimica Acta, 2011
- The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA compositesComposites Science and Technology, 2009
- The Effect of Processing on Fiber Dispersion, Fiber Length, and Thermal Degradation of Bleached Sulfite Cellulose Fiber Polypropylene CompositesJournal of Thermoplastic Composite Materials, 2009
- Development of epoxy/hyperbranched blends for resin transfer molding and vacuum assisted resin transfer molding applications: Effect of a reactive diluentPolymer Engineering & Science, 2009
- Polymer micro and nanocomposites: Structure, interactions, propertiesJournal of Industrial and Engineering Chemistry, 2008
- Study on epoxy/thermoplastic blends based on the addition of a novel aromatic block copolymerPolymer Engineering & Science, 2007
- Rigid poly(vinyl chloride) (PVC) gelation in the brabender measuring mixer. I. Equilibrium state between sliding, breaking, and gelation of PVCJournal of Applied Polymer Science, 2004
- Study of fusion percolation thresholds of rigid PVC compoundsJournal of Applied Polymer Science, 2001