Corrosion studies of SS 316H and Alloy 617 in thermally purified molten NaF‐KF‐UF4‐UF3 salts
- 27 June 2024
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 75 (11) , 1438-1462
Abstract
The study investigates salt chemistry and corrosion behavior of SS 316H and Alloy 617 in thermally purified molten NaF‐KF‐UF4‐UF3 salts (UF4/UF3 initial ratio 12–14) at 800°C for 120, 72, and 32 h. UF4/UF3 ratio increases after corrosion tests. Cr species concentration in salts keeps increasing. Fe, Co, Ni, and Mo species increase first, then decrease. Cr/Mn oxides are formed along grain boundaries in SS 316H. Cr near the surface of Alloy 617 is completely depleted. A thin layer composed of Fe, Co, Ni, and Mo is observed on the Alloy 617 surface in 72‐h and 32‐h tests.Keywords
This publication has 37 references indexed in Scilit:
- Intermediate temperature corrosion behaviour of Fe-12Cr-6Al-2Mo-0.2Si-0.03Y alloy (C26M) at 300–600 °CCorrosion Science, 2019
- Corrosion of Incoloy 800H alloys with nickel cladding in FLiNaK salts at 850 °CCorrosion Science, 2018
- Radiation Effects in Nickel-Based Alloys2012
- Corrosion of Molybdenum and its Alloys2010
- Corrosion of nickel, iron, cobalt and their alloys in molten salt electrolytesJournal of Materials Science, 1995
- Corrosion of steels in contact with salt eutectics as latent heat storage materials: Influence of water and other impuritiesHeat Recovery Systems and CHP, 1990
- Carbide precipitation, grain boundary segregation, and temper embrittlement in NiCrMoV rotor steelsMetallurgical Transactions A, 1985
- Corrosion in molten Na2CO3-K2CO3 at 800° C—I. Effect of oxygen partial pressure on iron corrosionCorrosion Science, 1984
- Grain boundary Cr-depleted zones in Ti and Nb stabilized austenitic stainless steelsJournal of Materials Science, 1983
- Effect of chromium and molybdenum segregation on the ridging behavior of type 434 stainless steelMetallurgical Transactions, 1971