Qiufeng Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qiufeng Yang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Ruchi Gakhar
Idaho National Laboratory
8 shared publications - Benjamin Beeler
North Carolina State University
3 shared publications - Garrett LeCroy
Idaho National Laboratory
3 shared publications - Michael Ellis Woods
Idaho National Laboratory
3 shared publications - Ammon Williams
Idaho National Laboratory
2 shared publications Jinsuo Zhang
Mechanical Engineering, Virginia Tech, 435 Goodwin Hall, 635 Prices Fork Road, Blacksburg, Virginia, 24061, UNITED STATES
2 shared publications
Latest Publications
- Open Access
- 28 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (40) , 10719-10734
In Situ UV–vis Quantification of Chlorobasicity in Binary Molten Chlorides
Optical basicity measurements provide a basis for determining the relative chlorobasicity of a given molten salt composition. This study uses Bi3+ as a spectroscopic probe to investigate optical basicity across three binary molten chloride systems (LiCl-KCl, MgCl2–KCl, and ZnCl2–KCl) through in situ UV–vis spectroscopy measurements of the 1S0→3P1 transition. LiCl-KCl systems exhibit the highest optical basicity with minimal compositional dependence, while both divalent systems show stronger, yet nonlinear, dependence that is reminiscent of acid–base titration curves. The influence of cation electronegativity and polarizing power (Li+ < Mg2+ < Zn2+) directly reflects the basicity curves, with ZnCl2–KCl displaying the steepest gradients and lowest basicity values. Nonlinear dependencies in divalent systems indicate formation of chloride-bridged network structures with coordination states dictated by the amount of KCl in a salt composition, which was further investigated and validated by molecular dynamics simulations of polymeric structures formed in ZnCl2 and MgCl2-based salts using machine learning force fields. The temperature dependence of chlorobasicity in terms of optical basicity was investigated, and a loose, positive correlation between the two was revealed. These findings establish Bi3+ as a sensitive probe for understanding electronic environments in molten chloride systems and provide insights for predicting the chemical behavior of molten salts for use in high-temperature environments.
- 28 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (40) , 10719-10734
Open AccessIn Situ UV–vis Quantification of Chlorobasicity in Binary Molten Chlorides
Optical basicity measurements provide a basis for determining the relative chlorobasicity of a given molten salt composition. This study uses Bi3+ as a spectroscopic probe to investigate optical basicity across three binary molten chloride systems (LiCl-KCl, MgCl2–KCl, and ZnCl2–KCl) through in situ UV–vis spectroscopy measurements of the 1S0→3P1 transition. LiCl-KCl systems exhibit the highest optical basicity with minimal compositional dependence, while both divalent systems show stronger, yet nonlinear, dependence that is reminiscent of acid–base titration curves. The influence of cation electronegativity and polarizing power (Li+ < Mg2+ < Zn2+) directly reflects the basicity curves, with ZnCl2–KCl displaying the steepest gradients and lowest basicity values. Nonlinear dependencies in divalent systems indicate formation of chloride-bridged network structures with coordination states dictated by the amount of KCl in a salt composition, which was further investigated and validated by molecular dynamics simulations of polymeric structures formed in ZnCl2 and MgCl2-based salts using machine learning force fields. The temperature dependence of chlorobasicity in terms of optical basicity was investigated, and a loose, positive correlation between the two was revealed. These findings establish Bi3+ as a sensitive probe for understanding electronic environments in molten chloride systems and provide insights for predicting the chemical behavior of molten salts for use in high-temperature environments.
- Open Access
- 8 May 2026
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 630
Molten salt corrosion resistance of refractory complex concentrated alloys (RCCAs) for molten salt reactors
- 8 May 2026
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 630
Open AccessMolten salt corrosion resistance of refractory complex concentrated alloys (RCCAs) for molten salt reactors
- 18 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (1) , 407-418
Temperature-Dependent Speciation of Ni(II) in Molten Chloride, Bromide, and Iodide Salts
Understanding the fundamental speciation and local structure of metal cations─such as nickel, which is present as a corrosion product─in molten salt media is essential for assessing their impact on the thermal and physical properties of salts used for advanced nuclear energy applications. In this study, we employed an integrated approach of combining X-ray absorption spectroscopy (XAS), UV-vis spectroscopy, and ab initio molecular dynamics (AIMD) to investigate the halide-dependent speciation of divalent nickel ions, Ni(II), in LiCl-KCl, LiBr-KBr, and LiI-KI eutectic salt mixtures from room temperature to 600 °C. Our findings show that both halide type and temperature significantly influence the local coordination of nickel in these molten salt systems. A notable aspect of Ni(II) speciation in LiI-KI salts is the formation of a polyiodide species. Our findings provide critical insights into metal ion speciation in molten salt systems, enhancing our understanding of the factors that govern the physicochemical properties of these complex fluids.
- 18 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (1) , 407-418
Temperature-Dependent Speciation of Ni(II) in Molten Chloride, Bromide, and Iodide Salts
Understanding the fundamental speciation and local structure of metal cations─such as nickel, which is present as a corrosion product─in molten salt media is essential for assessing their impact on the thermal and physical properties of salts used for advanced nuclear energy applications. In this study, we employed an integrated approach of combining X-ray absorption spectroscopy (XAS), UV-vis spectroscopy, and ab initio molecular dynamics (AIMD) to investigate the halide-dependent speciation of divalent nickel ions, Ni(II), in LiCl-KCl, LiBr-KBr, and LiI-KI eutectic salt mixtures from room temperature to 600 °C. Our findings show that both halide type and temperature significantly influence the local coordination of nickel in these molten salt systems. A notable aspect of Ni(II) speciation in LiI-KI salts is the formation of a polyiodide species. Our findings provide critical insights into metal ion speciation in molten salt systems, enhancing our understanding of the factors that govern the physicochemical properties of these complex fluids.
- Open Access
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (42) , 35036-35046
Online monitoring of lanthanide species with combined spectroscopy in flowing aqueous aerosol systems
Combined spectroscopic analysis through absorption and laser-induced breakdown spectroscopy (LIBS) was used to monitor Nd and Pr concentrations in a flowing aqueous system. A unique, online sampling approach was employed that allowed for an approximately closed analysis loop of liquids from a reservoir. Absorption spectroscopy was performed with an optical flow cell, and LIBS was performed on an aerosol stream. Multivariate calibrations based on combined absorption and LIBS signals were built for Nd and Pr and then used to monitor concentrations in mixed solutions in a series of spiking tests. In these tests, the concentrations of Nd and Pr in solution were intermittently changed while spectroscopic signals were monitored in real-time. The combined spectroscopic signals and multivariate models were successful in monitoring changing concentrations of lanthanide species with high accuracy and minimal latency. Root-mean squared error of predictions were 0.015 mol L−1 and 0.019 mol L−1 for Nd and Pr respectively, and these lanthanides were able to be monitored to an accuracy of < 0.2 wt%. This work demonstrates both the capabilities of a sampling system for online analysis of liquids and the capabilities of multimodal spectroscopic characterization for real-time, continuous tracking of species in potentially hazardous liquid systems.
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (42) , 35036-35046
Open AccessOnline monitoring of lanthanide species with combined spectroscopy in flowing aqueous aerosol systems
Combined spectroscopic analysis through absorption and laser-induced breakdown spectroscopy (LIBS) was used to monitor Nd and Pr concentrations in a flowing aqueous system. A unique, online sampling approach was employed that allowed for an approximately closed analysis loop of liquids from a reservoir. Absorption spectroscopy was performed with an optical flow cell, and LIBS was performed on an aerosol stream. Multivariate calibrations based on combined absorption and LIBS signals were built for Nd and Pr and then used to monitor concentrations in mixed solutions in a series of spiking tests. In these tests, the concentrations of Nd and Pr in solution were intermittently changed while spectroscopic signals were monitored in real-time. The combined spectroscopic signals and multivariate models were successful in monitoring changing concentrations of lanthanide species with high accuracy and minimal latency. Root-mean squared error of predictions were 0.015 mol L−1 and 0.019 mol L−1 for Nd and Pr respectively, and these lanthanides were able to be monitored to an accuracy of < 0.2 wt%. This work demonstrates both the capabilities of a sampling system for online analysis of liquids and the capabilities of multimodal spectroscopic characterization for real-time, continuous tracking of species in potentially hazardous liquid systems.
- Open Access
- 25 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Online monitoring of lanthanide species with combined spectroscopy in flowing aqueous aerosol systems
Combined spectroscopic analysis through absorption and laser-induced breakdown spectroscopy (LIBS) was used to monitor Nd and Pr concentrations in a flowing aqueous system. An inline sampling approach was employed that allowed for an approximately closed analysis loop of liquids from a reservoir. Absorption spectroscopy was performed with an optical flowcell, and LIBS was performed on an aerosol stream. Multivariate calibrations based on combined absorption and LIBS signals were built for Nd and Pr and then used to monitor concentrations in mixed solutions in a series of spiking tests. In these tests, the concentrations of Nd and Pr in solution were intermittently changed while spectroscopic signals were monitored in real-time. The combined spectroscopic signals and multivariate models were successful in monitoring changing concentrations of lanthanide species with high accuracy and minimal latency. Root-mean squared error of predictions were 0.015 mol/L and 0.019 mol/L for Nd and Pr respectively, and these lanthanides were able to be monitored to an accuracy of <0.2 wt.%. This work demonstrates the capabilities of multimodal spectroscopic characterization for real-time, continuous tracking of species in potentially hazardous liquid systems.
- 25 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOnline monitoring of lanthanide species with combined spectroscopy in flowing aqueous aerosol systems
Combined spectroscopic analysis through absorption and laser-induced breakdown spectroscopy (LIBS) was used to monitor Nd and Pr concentrations in a flowing aqueous system. An inline sampling approach was employed that allowed for an approximately closed analysis loop of liquids from a reservoir. Absorption spectroscopy was performed with an optical flowcell, and LIBS was performed on an aerosol stream. Multivariate calibrations based on combined absorption and LIBS signals were built for Nd and Pr and then used to monitor concentrations in mixed solutions in a series of spiking tests. In these tests, the concentrations of Nd and Pr in solution were intermittently changed while spectroscopic signals were monitored in real-time. The combined spectroscopic signals and multivariate models were successful in monitoring changing concentrations of lanthanide species with high accuracy and minimal latency. Root-mean squared error of predictions were 0.015 mol/L and 0.019 mol/L for Nd and Pr respectively, and these lanthanides were able to be monitored to an accuracy of <0.2 wt.%. This work demonstrates the capabilities of multimodal spectroscopic characterization for real-time, continuous tracking of species in potentially hazardous liquid systems.
- 7 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (28) , 24814-24824
Versatile Cell Design for Molten Fluoride Salt Spectroscopy: Investigating Metal-Ion Speciation in Molten Fluoride Salts
Fluoride-based molten salts are widely used in industrial applications including aluminum production, thermal energy storage, optical crystal growth, and advanced nuclear reactor designs. Despite the wide range of uses, fundamental understandings of coordination chemistry and methods for probing molten fluorides are scarce, likely due to the difficulty of probing fluoride melts with spectroscopic techniques. Performing spectroscopic measurements of fluoride-based salts is challenging due to the highly corrosive nature of these salts, which can degrade many common optical materials. In this work, we present a versatile optical cell design that enables spectroscopic measurements of corrosive melts. This innovative cell design overcomes the challenges posed by the corrosive nature of the salts, allowing for an accurate and consistent spectroscopic analysis. This work reports temperature-dependent absorption measurements for Co2+, Ni2+, and Cr3+ analytes in LiF-NaF-KF eutectic salt (i.e., FLiNaK), which are common corrosion products originating from structural alloys in molten-fluoride handling. Absorption spectra were used to understand interactions of these analytes with FLiNaK, particularly ligand field coordination. The analysis of absorption spectra was complemented by structural analyses using ab initio molecular dynamics (AIMD) simulations, providing deeper insights into the behavior of the analytes in FLiNaK. Our findings indicate that the analytes studied in this work exist in octahedral or near-octahedral coordination states that remain stable across the temperature range of 500-600 °C. This work not only highlights an applied solution to performing optical spectroscopy in corrosive, high-temperature melts but also provides important fundamental insight on coordination behavior of transition-metal species in molten fluorides.
- 7 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (28) , 24814-24824
Versatile Cell Design for Molten Fluoride Salt Spectroscopy: Investigating Metal-Ion Speciation in Molten Fluoride Salts
Fluoride-based molten salts are widely used in industrial applications including aluminum production, thermal energy storage, optical crystal growth, and advanced nuclear reactor designs. Despite the wide range of uses, fundamental understandings of coordination chemistry and methods for probing molten fluorides are scarce, likely due to the difficulty of probing fluoride melts with spectroscopic techniques. Performing spectroscopic measurements of fluoride-based salts is challenging due to the highly corrosive nature of these salts, which can degrade many common optical materials. In this work, we present a versatile optical cell design that enables spectroscopic measurements of corrosive melts. This innovative cell design overcomes the challenges posed by the corrosive nature of the salts, allowing for an accurate and consistent spectroscopic analysis. This work reports temperature-dependent absorption measurements for Co2+, Ni2+, and Cr3+ analytes in LiF-NaF-KF eutectic salt (i.e., FLiNaK), which are common corrosion products originating from structural alloys in molten-fluoride handling. Absorption spectra were used to understand interactions of these analytes with FLiNaK, particularly ligand field coordination. The analysis of absorption spectra was complemented by structural analyses using ab initio molecular dynamics (AIMD) simulations, providing deeper insights into the behavior of the analytes in FLiNaK. Our findings indicate that the analytes studied in this work exist in octahedral or near-octahedral coordination states that remain stable across the temperature range of 500-600 °C. This work not only highlights an applied solution to performing optical spectroscopy in corrosive, high-temperature melts but also provides important fundamental insight on coordination behavior of transition-metal species in molten fluorides.
- Open Access
- 2 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Versatile Cell Design for Molten Fluoride SaltSpectroscopy: Investigating Metal-IonSpeciation in Molten Fluoride Salts
Fluoride-based molten salts are widely used in industrial applications including aluminum production, thermal energy storage, optical crystal growth and advanced nuclear reactor designs. Despite the wide range of uses, fundamental understanding of coordination chemistry and methods for probing molten fluorides are scarce, likely due to the difficulty of probing fluoride melts with spectroscopic probes. Performing spectroscopic measurements of fluoride-based salts is challenging due to the highly corrosive nature of these salts, which can degrade many common optical materials. In this work, we present a versatile optical cell design that enables spectroscopic measurements corrosive melts. This innovative cell design overcomes the challenges posed by the corrosive nature of the salts, allowing for accurate and consistent spectroscopic analysis. This work reports temperature dependent absorption measurements for Co2+, Ni2+, and Cr3+ analytes in LiF-NaF-KF eutectic salt (i.e., FLiNaK), which are common corrosion products originating from structural alloys in molten-fluoride handling. Absorption spectra were used to understand interactions of these analytes with FLiNaK, particularly ligand field coordination. The analysis of absorption spectra was complemented by structural analyses using ab initio molecular dynamics (AIMD) simulations, providing deeper insights into the behavior of the analytes in FLiNaK. Our findings indicate that the analytes studied in this work exist in octahedral or near-octahedral coordination states that remain stable across the temperature range of 500-600°C. This work highlights not only an applied solution to performing optical spectroscopy in corrosive, high-temperature melts, but provides important fundamental insight on coordination behavior of transition metal species in molten fluorides.
- 2 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessVersatile Cell Design for Molten Fluoride SaltSpectroscopy: Investigating Metal-IonSpeciation in Molten Fluoride Salts
Fluoride-based molten salts are widely used in industrial applications including aluminum production, thermal energy storage, optical crystal growth and advanced nuclear reactor designs. Despite the wide range of uses, fundamental understanding of coordination chemistry and methods for probing molten fluorides are scarce, likely due to the difficulty of probing fluoride melts with spectroscopic probes. Performing spectroscopic measurements of fluoride-based salts is challenging due to the highly corrosive nature of these salts, which can degrade many common optical materials. In this work, we present a versatile optical cell design that enables spectroscopic measurements corrosive melts. This innovative cell design overcomes the challenges posed by the corrosive nature of the salts, allowing for accurate and consistent spectroscopic analysis. This work reports temperature dependent absorption measurements for Co2+, Ni2+, and Cr3+ analytes in LiF-NaF-KF eutectic salt (i.e., FLiNaK), which are common corrosion products originating from structural alloys in molten-fluoride handling. Absorption spectra were used to understand interactions of these analytes with FLiNaK, particularly ligand field coordination. The analysis of absorption spectra was complemented by structural analyses using ab initio molecular dynamics (AIMD) simulations, providing deeper insights into the behavior of the analytes in FLiNaK. Our findings indicate that the analytes studied in this work exist in octahedral or near-octahedral coordination states that remain stable across the temperature range of 500-600°C. This work highlights not only an applied solution to performing optical spectroscopy in corrosive, high-temperature melts, but provides important fundamental insight on coordination behavior of transition metal species in molten fluorides.
- Open Access
- 7 February 2025
- Published by Royal Society of Chemistry (RSC) in RSC Applied Interfaces
- Vol. 2 (3) , 715-723
Wettability studies of LiCl-KCl and FLiNaK on metal and non-metal substrates
This work reports the wettability characteristics of LiCl-KCl and FLiNaK on various substrates to address the gap in contact angle measurements.
- 7 February 2025
- Published by Royal Society of Chemistry (RSC) in RSC Applied Interfaces
- Vol. 2 (3) , 715-723
Open AccessWettability studies of LiCl-KCl and FLiNaK on metal and non-metal substrates
This work reports the wettability characteristics of LiCl-KCl and FLiNaK on various substrates to address the gap in contact angle measurements.
- 27 June 2024
- Published by Wiley in Materials and Corrosion
- Vol. 75 (11) , 1438-1462
Corrosion studies of SS 316H and Alloy 617 in thermally purified molten NaF‐KF‐UF4‐UF3 salts
The study investigates salt chemistry and corrosion behavior of SS 316H and Alloy 617 in thermally purified molten NaF‐KF‐UF4‐UF3 salts (UF4/UF3 initial ratio 12–14) at 800°C for 120, 72, and 32 h. UF4/UF3 ratio increases after corrosion tests. Cr species concentration in salts keeps increasing. Fe, Co, Ni, and Mo species increase first, then decrease. Cr/Mn oxides are formed along grain boundaries in SS 316H. Cr near the surface of Alloy 617 is completely depleted. A thin layer composed of Fe, Co, Ni, and Mo is observed on the Alloy 617 surface in 72‐h and 32‐h tests.
- 27 June 2024
- Published by Wiley in Materials and Corrosion
- Vol. 75 (11) , 1438-1462
Corrosion studies of SS 316H and Alloy 617 in thermally purified molten NaF‐KF‐UF4‐UF3 salts
The study investigates salt chemistry and corrosion behavior of SS 316H and Alloy 617 in thermally purified molten NaF‐KF‐UF4‐UF3 salts (UF4/UF3 initial ratio 12–14) at 800°C for 120, 72, and 32 h. UF4/UF3 ratio increases after corrosion tests. Cr species concentration in salts keeps increasing. Fe, Co, Ni, and Mo species increase first, then decrease. Cr/Mn oxides are formed along grain boundaries in SS 316H. Cr near the surface of Alloy 617 is completely depleted. A thin layer composed of Fe, Co, Ni, and Mo is observed on the Alloy 617 surface in 72‐h and 32‐h tests.