Evaluation of a Contra-Rotating Flux- Modulated Machine Featured With Dual Flux-Modulation for Wind Power Generation
- 29 September 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (9) , 8770-8781
Abstract
This article presents an investigation and evaluation of an integrated flux-modulated machine for wind power generation. The integrated flux-modulated machine has two rotors which function as two contrarotating rotors connected to two sets of turbine blades. Hence, compared to conventional wind generators, more wind energy could be captured by this wind power generation system. Moreover, the integrated machine consists of two sets of stator windings. By regulating the currents in these windings, dual maximum power point tracking control strategy could be achieved. As a result, the wind power conversion efficiency is further improved. Moreover, this wind power generation system exhibits the advantage of high torque/power density due to the enhanced magnetic-gearing effect involved in the integrated flux-modulated machine. Hence, this machine is more suitable for direct-drive wind power generation, where the reliability is improved without the maintenance issues related to mechanical gearboxes. The topology and operating principle of the investigated machine are demonstrated in detail. Decoupled design of the two sets of windings is investigated, and a general rule to achieve decoupled windings by appropriate slot-pole combination selection is illustrated. The advantages of the investigated machine are confirmed in comparison to a benchmark machine. Finally, the investigated flux-modulated machine is prototyped. The validity of the operating principle and the simulation results are verified by experimental results.Keywords
Funding Information
- National Research Foundation Singapore (NRF-NRFF12-2020-0003)
This publication has 30 references indexed in Scilit:
- Magnetic Gear: Radial Force, Cogging Torque, Skewing, and OptimizationIEEE Transactions on Industry Applications, 2016
- Optimal Design of an Outer-Stator Magnetically Geared Permanent Magnet MachineIEEE Transactions on Magnetics, 2015
- Analytical Modeling and Optimization of Pseudo-Direct Drive Permanent Magnet Machines for Large Wind TurbinesIEEE Transactions on Magnetics, 2015
- High-power wind energy conversion systems: State-of-the-art and emerging technologiesProceedings of the IEEE, 2015
- An Inner Rotor Flux-Modulated Permanent Magnet Synchronous Machine for Low-Speed High-Torque ApplicationsIEEE Transactions on Energy Conversion, 2015
- Characteristic Analysis and Verification of the Magnetic-Field-Modulated Brushless Double-Rotor MachineIEEE Transactions on Industrial Electronics, 2014
- Dual rotor single- stator axial air gap PMSM motor/generator drive for HEVs: A review of comprehensive modeling and performance characterization2012
- Overview of Control and Grid Synchronization for Distributed Power Generation SystemsIEEE Transactions on Industrial Electronics, 2006
- Aerodynamic performance prediction of a 30kW counter-rotating wind turbine systemRenewable Energy, 2005
- Design, analysis and realisation of a high-performance magnetic gearIEE Proceedings - Electric Power Applications, 2004