Deep Indentation of Hyperelastic Materials Reveals Tip-Independent Parabolic Force–Depth Response via Strain-Energy Delocalization
Preprint
- 7 July 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Indentation is a practical route for probing the mechanical properties of soft materials when standard tests are difficult, destructive, or simply cannot be performed in situ. However, conventional indentation is usually interpreted in the shallow-depth regime, where the indentation depth $D$ is small compared with the indenter radius $R$. In this limit, the response is controlled by local contact geometry and primarily identifies the small-strain elastic (Young's) modulus $E$. For example, flat-punch indentation of an incompressible elastomer produces the indentation force $F=(8/3)ERD$, as given by Sneddon theory, while a spherical-tipped indenter requires $F=(16/9)ER^{1/2}D^{3/2}$, as given by Hertz theory. Conversely, at deep indentation, for $D\gg R$, the indentation response converges to the same parabolic force--depth law, $F=\beta E D^2$, for both indenter tip shapes, where $\beta$ is a dimensionless coefficient controlled by the hyperelastic behavior of the material and increasing with strain stiffening. We show that $\beta$ is only mildly affected by interfacial friction, while independent of indenter radius and tip shape. We show that the parabolic scaling arises from strain-energy delocalization: as indentation depth increases, the region where the strain energy density satisfies $\mathrm{SED}/\mu>0.01$ expands into a spheroidal domain whose effective radius scales with $D$. The activated volume therefore scales as $D^3$, giving the total stored elastic energy as $U\sim E D^3$, so that $F=dU/dD\sim E D^2$. Far from the contact, the finite-element strain-energy-density fields collapse and approach the Boussinesq far-field solution when distances are normalized by the strain-energy delocalization length $a=\sqrt{F/E}$, which scales as $a\sim D$ in the deep-indentation regime. This provides a mechanistic basis for the growth of the activated region and the loss of tip-shape dependence. Finally, these results link $\beta$ to the Ogden strain-stiffening parameter $\alpha$ for incompressible materials, enabling hyperelastic parameter extraction from deep-indentation data.
Keywords
All Related Versions
This publication has 18 references indexed in Scilit:
- Techniques for characterizing mechanical properties of soft tissuesJournal of the Mechanical Behavior of Biomedical Materials, 2022
- Piercing soft solids: A mechanical theory for needle insertionJournal of the Mechanics and Physics of Solids, 2021
- Clamping soft biologic tissues for uniaxial tensile testing: A brief survey of current methods and development of a novel clamping mechanismJournal of the Mechanical Behavior of Biomedical Materials, 2020
- Experimental validation of a flat punch indentation methodology calibrated against unconfined compression tests for determination of soft tissue biomechanicsJournal of the Mechanical Behavior of Biomedical Materials, 2016
- Puncture mechanics of soft solidsSoft Matter, 2015
- Non-ideal effects in indentation testing of soft tissuesBiomechanics and Modeling in Mechanobiology, 2013
- Spherical indentation method for determining the constitutive parameters of hyperelastic soft materialsBiomechanics and Modeling in Mechanobiology, 2013
- Method of testing very soft biological tissues in compressionJournal of Biomechanics, 2005
- Analysis of effects of friction on the deformation behavior of soft tissues in unconfined compression testsJournal of Biomechanics, 2004
- The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profileInternational Journal of Engineering Science, 1965