Nanofiber-based humidity sensor for non-invasive real-time breath analysis
- 9 October 2025
- journal article
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 10 (4) , 045003
Abstract
We report the development of an ultrafast internet of things (IoT)-enabled humidity sensor using a nanofibrillar surface composed of cellulose and graphene oxide nanocomposite embedded with polyaniline and gold nanorods (Au NRs). The results uncover that, as compared to the conventional flat surface sensors, the usage of the physiochemically heterogeneous nanofiber surface embedded with Au NRs and conducting polymers elucidate excellent sensing linearity, fast response time, marginal hysteresis, and repeatability. In particular, the usage of the nanofibers escalates the surface to volume ratio of the sensor significantly to exhibit a remarkable sensitivity across a wide range of humidity levels leading to a variation in the voltage output progressively increasing from the ∼26 mV to ∼73 mV in the range of relative humidity (RH) from a very low (∼11%) to a very high (∼96%). With an optimal loading of Au NRs and conducting polymer, the nanofibrillar composite has also demonstrated the ability to monitor humidity in real-time within the 11%–96% range, with a response time of 45 s and a recovery time of 136 s. The results showed a linear range of 11%–96% RH, a sensitivity of 0.687 mV/%RH, and a limit of detection of 11% RH. Remarkably, during the experiments performed for the measurements of multiple humidity cycles in real-time, the sensor shows a very low relative standard deviation (∼1%). Integration of the IoT platform in the form of a WiFi module (ESP8266) with the proposed humidity-sensing unit enables real-time monitoring of the humidity levels, which can be suitable for point-of-care applications.Keywords
Funding Information
- Department of Biotechnology, Ministry of Science and Technology, India (BT/PR41254/ATGC/127/86/ 2020)
- Ministry of Electronics and Information technology (5(1)/2022 − NANO)
- ICMR, Grant (5/3/8/20/2019-ITR)
This publication has 51 references indexed in Scilit:
- Continuous Manufacturing of Active Pharmaceutical Ingredients: Current Trends and PerspectivesAdvanced Synthesis & Catalysis, 2024
- Progress and future of relative humidity sensors: a review from materials perspectiveBulletin of Materials Science, 2022
- The humidity sensing characteristics of PANI-titania nanotube-rGO ternary nanocompositeDiamond and Related Materials, 2022
- Flexible nanostructured TiO2-based gas and UV sensors: a reviewDiscover Materials, 2022
- Controlled Assembly of Plasmonic Nanoparticles: From Static to Dynamic NanostructuresAdvanced Materials, 2021
- Fabrication of reduced graphene oxide-cellulose nanofibers based hybrid film with good hydrophilicity and conductivity as electrodes of supercapacitorCellulose, 2021
- An IoT-enabled paper sensor platform for real-time analysis of isothermal nucleic acid amplification testsBiosensors and Bioelectronics, 2020
- Synthesis of graphene oxides particle of high oxidation degree using a modified Hummers methodCeramics International, 2020
- Nano-enabled paper humidity sensor for mobile based point-of-care lung function monitoringBiosensors and Bioelectronics, 2017
- Influence of temperature and relative humidity conditions on the pan coating of hydroxypropyl cellulose molded capsulesEuropean Journal of Pharmaceutics and Biopharmaceutics, 2016