Oxidation performance of particle-reinforced Ti750 matrix composites
- 26 September 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 237 (4) , 859-866
Abstract
This study used SiCp, SiCw, B4C, and GPLs as reinforcements for Ti750 matrix alloy and composites synthesized by spark plasma sintering. The oxidation performances of the composites were then evaluated at 800 °C. 5 vol.% SiCp reinforced Ti750 composite recorded the least oxidation weight gain of 3.80 mg.cm−2, about 41.8% of the base alloy. The average oxidation rates K + of the five materials at 800 °C were less than 1 g.m−2.h−1, indicating all materials were within the anti-oxidation grade with excellent anti-oxidation performance. The oxidation products of the samples contained TiO2, Al2O3, and SiO2. 5 vol.% SiCp reinforced Ti750 composite had significantly flatter and denser oxide film, which was well bonded with the matrix thus having a better protective effect than the matrix material. With the addition of SiCp, the thickness of the oxide film decreased, and the resistance of the material significantly improved its high-temperature oxidation performance.Keywords
Funding Information
- Key Projects of the 13th Five-Year Plan Equipment Pre-research Foundation of the Ministry of Equipment Development of the Central Military Commission of China (6140922010201)
This publication has 21 references indexed in Scilit:
- Mechanical, corrosion and wear characteristics of powder metallurgy processed Ti-6Al-4V/B4C metal matrix compositesAin Shams Engineering Journal, 2018
- Formation, stability, and solubility of metal oxide nanoparticles: Surface entropy, enthalpy, and free energy of ferrihydriteGeochimica et Cosmochimica Acta, 2015
- Titanium metal matrix composites by powder metallurgy (PM) routes2015
- Effect of germanium and silicon additions on the mechanical properties of a near-α titanium alloyMaterials Science and Engineering: A, 2014
- Effect of pre-oxidization on the cyclic coking and carburizing resistance of HP40 alloy: With and without yttrium modificationCorrosion Science, 2013
- Effect of hot-dip aluminizing on the oxidation resistance of Ti–6Al–4V alloy at high temperaturesCorrosion Science, 2012
- Mechanical Properties and Wear Resistances of TiC or B4C Reinforced Ti-6Al-4V Prepared by Spark Plasma SinteringMaterials Science Forum, 2012
- Evidence for stable stoichiometric Ti2C at the interface in TiC particulate reinforced Ti alloy compositesActa Materialia, 2000
- Oxidation of ductile particle reinforced Ti-48Al compositeMetallurgical and Materials Transactions A, 1995
- Formation of Composite Scales Consisting of Oxides of Different MetalsJournal of the Electrochemical Society, 1956