Thermal and Mechanical Properties of Blends and Composites from HDPE and Date Pits Particles
- 10 January 2008
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 42 (1) , 77-89
Abstract
The date pits flour was used as a filling material in composition with high density polyethylene (HDPE). The blending proportions were: (1) 10% date pits, 90% HDPE; (2) 20% date pits, 80% HDPE; (3) 30% date pits, 70% HDPE; and (4) 40% date pits, 60% HDPE. Thermal conductivities, specific heat, and melt flow index of the blends were determined. The thermal conductivities ranged from 0.460 to 0.720 W/(m°C) and specific heats ranged from 1.10 to 5.30 kJ/(kg°C). The tensile and flexural tests on composite plates, fabricated by compress molding, indicated that strength and strain values decreased with increase in the percentage of date pits. There was no significant difference between flexural moduli of elasticity of the composites, but tensile modulus had the highest value at 30% blend. Moduli of elasticity of the composites were lower than the plates prepared from virgin HDPE at 180°C. It was presumed that high temperature processing of pure HDPE altered its original properties and consequently increased its modulus of elasticity.Keywords
This publication has 8 references indexed in Scilit:
- Date seeds: chemical composition and characteristic profiles of the lipid fractionFood Chemistry, 2004
- Utilization of Raw and Activated Date Pits for the Removal of Phenol from Aqueous SolutionsChemical Engineering & Technology, 2004
- Dynamic Mechanical and Thermal Properties of Modified Poly(propylene) Wood Fiber CompositesMacromolecular Materials and Engineering, 2003
- Preliminary analysis and potential uses of date pits in foodsFood Chemistry, 2002
- Surface modifications of natural fibers and performance of the resulting biocomposites: An overviewComposite Interfaces, 2001
- Effect of volumetric water content on thermal properties of dairy cattle feces mixed with sawdustBioresource Technology, 1999
- Use of Wood Flour as Filler in Polypropylene: Studies on Mechanical PropertiesPolymer-Plastics Technology and Engineering, 1989
- A Novel Processing Aid for Greater Flexibility in Blown Film ExtrusionJournal of Plastic Film & Sheeting, 1987