On-Line Standard Addition Technique for the Determination of Elements in the Samples with High Dissolved Solids by ICP-OES: Application to Determination of Rare Earth Elements in Geological Samples
- 27 December 2013
- journal article
- research article
- Published by Taylor & Francis in Analytical Letters
- Vol. 47 (1) , 146-154
Abstract
A simple and rapid on-line standard addition method for analysis of samples with high dissolved solids by ICP-OES is reported. The method involves on-line addition of standard solutions to the sample using a T-piece, prior to the sample introduction system. The standard addition method is commonly used in the analysis of samples with complex matrices. However, the conventional standard addition method is a tedious and time-consuming process. Therefore, in this study, on-line standard addition technique was offered to significantly decrease the analysis time and increase the simplicity of the standard addition method. The performance of the proposed method was tested by determination of rare earth elements in geological samples. This method showed a high level of accuracy in comparison with external calibration and internal standard addition methods.Keywords
This publication has 11 references indexed in Scilit:
- Analysis of biodiesel and oil samples by on-line calibration using a Flow Blurring® multinebulizer in ICP OES without oxygen additionJournal of Analytical Atomic Spectrometry, 2012
- Determination of uranium in pore water from coastal sediment by standard addition ICP-MS analysisJournal of Radioanalytical and Nuclear Chemistry, 2007
- Trace and ultratrace analysis in liquids by atomic spectrometryTrAC Trends in Analytical Chemistry, 2005
- Atomic SpectroscopyAnalytical Chemistry, 2004
- Direct multielemental analysis of human serum by ICP-MS with on-line standard addition using flow injectionJournal of Analytical Atomic Spectrometry, 2003
- Determination of calcium, magnesium and strontium in soils by flow injection flame atomic absorption spectrometryTalanta, 1999
- Nonlinear calibration by the standard addition methodChemometrics and Intelligent Laboratory Systems, 1999
- Guidelines for calibration in analytical chemistry. Part I. Fundamentals and single component calibration (IUPAC Recommendations 1998)Pure and Applied Chemistry, 1998
- Direct determination of zinc in seawater by graphite furnace atomic absorption spectrometrySpectrochimica Acta Part B: Atomic Spectroscopy, 1995
- On-line enrichment and determination of trace sulfur in high-purity iron samples by flow injection and inductively coupled plasma atomic emission spectrometryJournal of Analytical Atomic Spectrometry, 1992