Service lifetime prediction of nitrile butadiene rubber gaskets used in plate heat exchangers
- 6 May 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (28)
Abstract
Gasketed plate heat exchangers are characterized in a usual heat exchanger class. These systems employ elastomeric gaskets as the sealing element. Several conditions lead to oxidation and deterioration of these materials and their properties. In addition, the complex geometry of the gaskets and operation conditions may cause divergence in the expected aging behavior of the rubber. In light of this, this study aims to predict the service lifetime for nitrile butadiene rubber gaskets used in plate heat exchangers based on their geometry under thermo‐oxidative aging. These gaskets were evaluated by means of Shore A hardness, compression set (CS), and indentation modulus profile. Through aging‐sealing tests, an end‐of‐life criteria was determined concerning CS measurements and the service lifetime prediction was obtained by time–temperature superposition and WLF method. Diffusion‐limited oxidation effects were observed at high temperatures in postaging analysis and a non‐Arrhenius behavior was observed at 170°C. The value of 79% CS was obtained as end‐of‐life criteria from 60 to 140°C, ranged from 731 to 80 days, respectively, revealing an activation energy equivalent to 32.3 kJ mol−1. These results might support the maintenance planning control of gasketed plate heat exchangers.Keywords
This publication has 34 references indexed in Scilit:
- Review of polymer oxidation and its relationship with materials performance and lifetime predictionPolymer Degradation and Stability, 2013
- Lifetime prediction of NBR composite sheet in aviation kerosene by using nonlinear curve fitting of ATR-FTIR spectraJournal of Industrial and Engineering Chemistry, 2013
- Useful lifetime prediction of rubber componentEngineering Failure Analysis, 2011
- Accelerated aging and lifetime prediction: Review of non-Arrhenius behaviour due to two competing processesPolymer Degradation and Stability, 2005
- Influence of molecular parameters and processing conditions on degradation of hydrogenated nitrile butadiene rubbersJournal of Applied Polymer Science, 2005
- Predicting and confirming the lifetime of o-ringsPolymer Degradation and Stability, 2005
- Accelerated thermal ageing studies on nitrile rubber O-ringsPolymer Testing, 2003
- Validation of improved methods for predicting long-term elastomeric seal lifetimes from compression stress–relaxation and oxygen consumption techniquesPolymer Degradation and Stability, 2003
- Oxidation profiles of thermally aged nitrile rubberPolymer Degradation and Stability, 1998
- The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming LiquidsJournal of the American Chemical Society, 1955