Investigation on surface characteristics of wall structures out of stainless steel 316L manufactured by laser powder bed fusion
Open Access
- 13 February 2024
- journal article
- research article
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 9 (6) , 2041-2060
Abstract
Pressure equipment poses a high risk of harming people and the environment in case of failure. They are, therefore, highly regulated by the Pressure Equipment Directive. To enable laser powder bed fusion of metals (PBF-LB/M) for the manufacturing of such components, component appearance and quality need to be characterized and qualified for each specific system. In this study, the surface roughness of wall structures out of austenitic stainless steel (316L) is investigated. Wall structure specimens were produced by four manufacturing systems on different PBF-LB/M machines and with different powder materials. Surface roughness of specimens are compared in the upskin and downskin areas in relation to different slope angles and wall thicknesses. Although different process setups, parameters and powder feedstocks have been used, similarities in the dependency of the surface roughness related to the slope angle and wall thickness can be observed. This work furthermore presents a mechanism-based analytical approach to predict system-specific surface roughness. Particularly, the analytical approach on the influence of slope angle on the surface roughness of the downskin areas has not been covered in publications about PBF-LB/M before. The results of this work enable the prediction of system-specific surface roughness, which is especially important for parts with downskin areas and hidden surfaces without the possibility of additional surface treatment.Keywords
Funding Information
- Technische Universität Darmstadt
This publication has 26 references indexed in Scilit:
- Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steelJournal of Materials Processing Technology, 2017
- Einfluss der Korngrößenverteilung auf Fließfähigkeit und Bauteilqualität beim Laserstrahlschmelzen2017
- Comparison of microstructure and mechanical properties of 316L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast materialMaterials Science and Engineering: A, 2016
- Effect of manufacturing parameters on mechanical properties of 316L stainless steel parts fabricated by selective laser melting: A computational frameworkMaterials & Design, 2016
- Effect of Process Parameters on the Surface Roughness of Overhanging Structures in Laser Powder Bed Fusion Additive ManufacturingProcedia CIRP, 2016
- Analysis and optimisation of vertical surface roughness in micro selective laser meltingSurface Topography: Metrology and Properties, 2015
- The influence of heat accumulation on the surface roughness in powder-bed additive manufacturingSurface Topography: Metrology and Properties, 2015
- Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V StructuresMaterials, 2013
- Effects of processing parameters on tensile properties of selective laser melted 304 stainless steelMaterials & Design (1980-2015), 2013
- Surface roughness analysis, modelling and prediction in selective laser meltingJournal of Materials Processing Technology, 2013