Influence of Acid Composition on Morphology and Physical Properties of Titanium Alloy
Open Access
- 17 February 2025
- journal article
- Published by F1000 Research Ltd in F1000Research
- Vol. 14, 216
Abstract
Background Surface modifications of titanium alloys used in dental implants can significantly change the implants’ micro and nano topography and composition. These alterations can lead to substantial improvements in mechanical properties, hydrophilicity, osseointegration, and antibacterial performance, as well as positively influencing osteoblast activity and bone formation processes. This paper investigates the effect of the combination of acid etching on titanium alloys’ surface morphology, roughness, and hydrophilicity. Methods A titanium alloy (Ti6Al4V) disc with a diameter of 12 mm and thickness of 2 mm was sandblasted using aluminum oxide Al2O3 by particle sizes 100 μm, 250 μm, and 500 μm and followed by acid etching. Acid etching was carried out on these samples using different combinations of acid, i.e., hydrofluoric acid (HF), hydrochloric acid (HCL), and sulfuric acid (H2SO4), with the same temperature and time exposure. All titanium surfaces were characterized using a scanning electron microscope (SEM) and contact profilometer. Results This study showed that the type of acid combination influenced the surface morphology and roughness profile. After sandblast and acid etching, the titanium alloy has roughness between 1.369 μm – 4.304 μm. There is no significant difference in surface roughness between using a combination of HF, HCL, H2SO4 and only the combination of HCL and H2SO4. Conclusions Titanium alloy has achieved the desired morphology and roughness after sandblasting with Al2O3 250 μm and acid-etching with HCL and H2SO4. Acid etching with a combination of HCL and H2SO4 at 120 degrees can produce micro-topography in a shorter duration.Keywords
Funding Information
- Hibah PUTI Q1 2024 Universitas Indonesia (NKB-333/UN2.RST/HKP.05.00/2024)
This publication has 14 references indexed in Scilit:
- Manufacture of titanium alloy materials with bioactive sandblasted surfaces and evaluation of osseointegration propertiesFrontiers in Bioengineering and Biotechnology, 2023
- Critical Role of Etching Parameters in the Evolution of Nano Micro SLA Surface on the Ti6Al4V Alloy Dental ImplantsMaterials, 2021
- TiO2 Nanonetwork on Rough Ti Enhanced Osteogenesis In Vitro and In VivoJournal of Dental Research, 2021
- Comparative evaluation among laser-treated, machined, and sandblasted/acid-etched implant surfaces: an in vivo histologic analysis on sheepInternational Journal of Implant Dentistry, 2020
- Influence of the Titanium Implant Surface Treatment on the Surface Roughness and Chemical CompositionMaterials, 2020
- Al2O3 Particles on Titanium Dental Implant Systems following Sandblasting and Acid-Etching ProcessInternational Journal of Biomaterials, 2019
- Effect of Different Surface Treatments on Titanium Dental Implant Micro-MorphologyMaterials, 2019
- The Effects of Acid Etching on the Nanomorphological Surface Characteristics and Activation Energy of Titanium Medical MaterialsMaterials, 2017
- Osteogenic activity of titanium surfaces with hierarchical micro/nano-structures obtained by hydrofluoric acid treatmentInternational Journal of Nanomedicine, 2017
- Effect of Hydrofluoric Acid Etching Time on Titanium Topography, Chemistry, Wettability, and Cell AdhesionPLOS ONE, 2016