Study on the Morphology, Wear Resistance, and Corrosion Resistance of CuSn12 Alloys Subjected to Machine Hammer Peening
Open Access
Abstract
In this study, machine hammer peening (MHP) was employed to enhance the surface properties of CuSn12 alloys, and the effects of different impact energies on the surface morphology, mechanical properties, and electrochemical properties were systematically investigated. The results revealed that the surface morphology evolution after MHP treatment exhibited unique non-monotonic characteristics, which significantly differed from the surface effects of conventional shot peening technology. Microhardness tests indicated that the surface hardness increased by 40% to approximately 150 HV after treatment with 3.5 J impact energy. Friction and wear tests demonstrated that specimens treated with 2.7 J impact energy exhibited optimal wear resistance, with an 82.7% reduction in volume wear loss, and the wear mechanism transformed from composite wear to mild fatigue wear. Electrochemical performance tests showed that corrosion resistance continuously improved as the impact energy increased from 2.7 J to 3.5 J, primarily attributed to grain refinement and passive film formation; however, treatment with 1.7 J impact energy resulted in decreased corrosion resistance. The results demonstrate that optimizing MHP process parameters can significantly enhance the overall properties of CuSn12 alloys, providing a novel technical approach for the surface-strengthening of this alloy.Keywords
Funding Information
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX24_3554, KFJN2428)
- the Large Instruments Open Foundation of Nantong University (KYCX24_3554, KFJN2428)
This publication has 40 references indexed in Scilit:
- Effect of Shot Peening on the Corrosion and Wear Resistance of 2205 Duplex Stainless SteelJournal of Materials Engineering and Performance, 2022
- Novel combination of indicators to compare the corrosion behaviors of Al, Al–Li alloy 2A97, and other Al alloysMaterials and Corrosion, 2021
- Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peeningCorrosion Science, 2021
- A review of passivity breakdown on metal surfaces: influence of chloride- and sulfide-ion concentrations, temperature, and pHEmergent Materials, 2021
- Anticorrosion property enhancement of Al–Li alloy 2A97 by lowering machined surface roughnessMaterials and Corrosion, 2020
- Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peeningJournal of Materials Processing Technology, 2019
- Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairsInternational Journal of Fatigue, 2017
- Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years LaterJOM, 2016
- Evaluation of effect of alloy elements in copper based CuSn10 and CuZn30 bearings on tribological and mechanical propertiesJournal of Alloys and Compounds, 2010
- Understanding material interactions in marine environments to promote extended structural lifeCorrosion Science, 2005