Power scaling of fundamental-mode thin-disk lasers using intracavity deformable mirrors
Authors:
- 4 December 2012
- journal article
- Published by Optica Publishing Group in Optics Letters
- Vol. 37 (24) , 5033-5035
Abstract
Since its first demonstration almost two decades ago, the concept of the thin-disk laser has proven its excellent power scaling properties, enabling output powers in the multi-kW-range at decent beam quality. However, power scalability in fundamental-mode operation is limited by severe diffraction losses arising from thermally induced aspherical wavefront distortions in the pumped laser crystal. In order to compensate for these wavefront distortions, we have developed a deformable mirror concept based on pneumatic actuation, providing a step-like surface deformation with adaptable magnitude. Using one of these mirrors, we have achieved output powers as high as 815 W at nearly diffraction-limited beam quality () from a single disk, which is—to the best of the authors’ knowledge—the highest output power at this beam quality demonstrated so far.
Keywords
This publication has 11 references indexed in Scilit:
- Enhanced performance of thin-disk lasers by pumping into the zero-phonon lineOptics Letters, 2012
- Improving the brightness of a multi-kilowatt single thin-disk laser by an aspherical phase front correctionOptics Letters, 2011
- The broad applicability of the disk laser principle: from CW to ps2009
- Thin disk laser: power scaling to the kW regime in fundamental mode operation2009
- Intracavity beam shaping for high power thin-disk lasers2006
- Thermooptical compensation methods for high-power lasersIEEE Journal of Quantum Electronics, 2002
- Intracavity control of a 200-W continuous-wave Nd:YAG laser by a micromachined deformable mirrorOptics Letters, 2001
- Thermooptical properties of transversely pumped composite YAG rods with a Nd-doped coreIEEE Journal of Quantum Electronics, 2000
- Scalable concept for diode-pumped high-power solid-state lasersApplied Physics B, 1994
- Active correction of a thermal lens in a solid-state laser. I. Metal mirror with a controlled curvature of the central region of the reflecting surfaceSoviet Journal of Quantum Electronics, 1991