Stefan Piehler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Stefan Piehler has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Marwan Abdou Ahmed
Institut für Strahlwerkzeuge, Universität Stuttgart, Pfaffenwaldring 43,70569 Stuttgart, Germany
4 shared publications- Marwan Abdou Ahmed
University of Stuttgart
4 shared publications Thomas Graf
Institut für Strahlwerkzeuge, Universität Stuttgart, Pfaffenwaldring 43,70569 Stuttgart, Germany
4 shared publications- Thomas Graf
Universität Stuttgart
4 shared publications - Tom Dietrich
Institut fuer Strahlwerkzeuge, Universitaet Stuttgart, Pfaffenwaldring 43, 70569 Stuttgart, Germany
4 shared publications - Kevin Schmidt
Institute for System Dynamics, University of Stuttgart, Stuttgart, Germany
2 shared publications
Latest Publications
- 22 February 2019
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 86 (3) , 121-130
Entwurf deformierbarer Spiegel für den Einsatz in Hochleistungslasern
Zusammenfassung: Thermische Effekte limitieren die Leistungsskalierbarkeit in Hochleistungsscheibenlasern und können durch konstruktive Maßnahmen nur bedingt reduziert werden. Ein neuartiger Ansatz zur Kompensation der thermisch induzierten Effekte wird durch den resonatorinternen Einsatz hochleistungstauglicher adaptiver Spiegel ermöglicht. In diesem Beitrag werden hierfür zwei mögliche Technologien vorgestellt und charakterisiert: Während pneumatisch aktuierte Flächenlastspiegel eine gezielte Kompensation bekannter Wellenfrontstörungen erlauben, bieten optisch adressierte deformierbare Spiegel die Möglichkeit nahezu arbiträre Deformationen zu realisieren. Jene Bauform nutzt thermoelastische Effekte infolge der lokalen Erwärmung des Spiegels um gewünschte Deformationen zu erzielen.
- 22 February 2019
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 86 (3) , 121-130
Entwurf deformierbarer Spiegel für den Einsatz in Hochleistungslasern
Zusammenfassung: Thermische Effekte limitieren die Leistungsskalierbarkeit in Hochleistungsscheibenlasern und können durch konstruktive Maßnahmen nur bedingt reduziert werden. Ein neuartiger Ansatz zur Kompensation der thermisch induzierten Effekte wird durch den resonatorinternen Einsatz hochleistungstauglicher adaptiver Spiegel ermöglicht. In diesem Beitrag werden hierfür zwei mögliche Technologien vorgestellt und charakterisiert: Während pneumatisch aktuierte Flächenlastspiegel eine gezielte Kompensation bekannter Wellenfrontstörungen erlauben, bieten optisch adressierte deformierbare Spiegel die Möglichkeit nahezu arbiträre Deformationen zu realisieren. Jene Bauform nutzt thermoelastische Effekte infolge der lokalen Erwärmung des Spiegels um gewünschte Deformationen zu erzielen.
- 1 July 2018
- Published by Walter de Gruyter GmbH in at - Automatisierungstechnik
- Vol. 66 (7) , 506-520
Modellierung optisch adressierter Spiegel für adaptive Hochleistungslaser
Zusammenfassung: Optisch adressierte deformierbare Spiegel (OADMs, engl. für optically addressed deformable mirrors) können in Hochleistungslasern zur Kompensation thermisch induzierter Störungen und zur aktiven Strahlformung verwendet werden. In diesem Artikel wird ein Modellierungsansatz vorgestellt, der die vom OADM absorbierte Adressierstrahlung als verteilt-wirkenden Stelleingriff berücksichtigt. Zudem werden durch den Primärlaser verursachte Stördeformationen dargestellt. Mit geometrisch-physikalischen Argumenten wird das kontinuumsmechanische Modell vereinfacht: Da der Wärmefluss in Tiefenrichtung dominiert, kann diese Koordinate mittels partieller Ortsdiskretisierung als verteilte Größe beibehalten werden. Das resultierende verteilt-parametrische Entwurfsmodell stellt die Basis für late lumping-Steuerungs- und Regelungsmethoden dar und wird anhand experimenteller Daten validiert.
- 1 July 2018
- Published by Walter de Gruyter GmbH in at - Automatisierungstechnik
- Vol. 66 (7) , 506-520
Modellierung optisch adressierter Spiegel für adaptive Hochleistungslaser
Zusammenfassung: Optisch adressierte deformierbare Spiegel (OADMs, engl. für optically addressed deformable mirrors) können in Hochleistungslasern zur Kompensation thermisch induzierter Störungen und zur aktiven Strahlformung verwendet werden. In diesem Artikel wird ein Modellierungsansatz vorgestellt, der die vom OADM absorbierte Adressierstrahlung als verteilt-wirkenden Stelleingriff berücksichtigt. Zudem werden durch den Primärlaser verursachte Stördeformationen dargestellt. Mit geometrisch-physikalischen Argumenten wird das kontinuumsmechanische Modell vereinfacht: Da der Wärmefluss in Tiefenrichtung dominiert, kann diese Koordinate mittels partieller Ortsdiskretisierung als verteilte Größe beibehalten werden. Das resultierende verteilt-parametrische Entwurfsmodell stellt die Basis für late lumping-Steuerungs- und Regelungsmethoden dar und wird anhand experimenteller Daten validiert.
- 1 January 2018
- Published by Optica Publishing Group
- p. SM1N.4
Passive compensation of beam misalignment caused by air convection in thin-disk lasers
We present a new approach to passively compensate for the misalignment instabilites caused by convection of heated ambient air in front of a thin-disk laser crystal by means of exploiting the spectral dispersion of a diffracting grating-waveguide mirror.
- 1 January 2018
- Published by Optica Publishing Group
- p. SM1N.4
Passive compensation of beam misalignment caused by air convection in thin-disk lasers
We present a new approach to passively compensate for the misalignment instabilites caused by convection of heated ambient air in front of a thin-disk laser crystal by means of exploiting the spectral dispersion of a diffracting grating-waveguide mirror.
- Open Access
- 16 February 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (4) , 4254-4267
Deformable mirrors for intra-cavity use in high-power thin-disk lasers
We present deformable mirrors for the intra-cavity use in high-power thin-disk laser resonators. The refractive power of these mirrors is continuously adaptable from −0.7 m−1 to 0.3 m−1, corresponding to radii of curvature ranging between 2.86 m (convex) and 6.67 m (concave). The optimized shape of the mirror membrane enables a very low peak-to-valley deviation from a paraboloid deformation over a large area. With the optical performance of our mirrors being equal to that of standard HR mirrors, we were able to demonstrate the tuning of the beam quality of a thin-disk laser in a range of M2 = 3 to M2 = 1 during laser operation at output powers as high as 1.1 kW.
- 16 February 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (4) , 4254-4267
Open AccessDeformable mirrors for intra-cavity use in high-power thin-disk lasers
We present deformable mirrors for the intra-cavity use in high-power thin-disk laser resonators. The refractive power of these mirrors is continuously adaptable from −0.7 m−1 to 0.3 m−1, corresponding to radii of curvature ranging between 2.86 m (convex) and 6.67 m (concave). The optimized shape of the mirror membrane enables a very low peak-to-valley deviation from a paraboloid deformation over a large area. With the optical performance of our mirrors being equal to that of standard HR mirrors, we were able to demonstrate the tuning of the beam quality of a thin-disk laser in a range of M2 = 3 to M2 = 1 during laser operation at output powers as high as 1.1 kW.
- 22 December 2015
- Published by Optica Publishing Group in Optics Letters
- Vol. 41 (1) , 171-174
Highly efficient 400 W near-fundamental-mode green thin-disk laser
We report on the efficient generation of continuous-wave, high-brightness green laser radiation. Green lasers are particularly interesting for reliable and reproducible deep-penetration welding of copper or for pumping Ti:Sa oscillators. By intracavity second-harmonic generation in a thin-disk laser resonator designed for fundamental-mode operation, an output power of up to 403 W is demonstrated at a wavelength of 515 nm with almost diffraction-limited beam quality. The unprecedented optical efficiency of 40.7% of green output power with respect to the pump power of the thin-disk laser is enabled by the intracavity use of a highly efficient grating waveguide mirror, which combines the functions of wavelength stabilization and spectral narrowing, as well as polarization selection in a single element.
- 22 December 2015
- Published by Optica Publishing Group in Optics Letters
- Vol. 41 (1) , 171-174
Highly efficient 400 W near-fundamental-mode green thin-disk laser
We report on the efficient generation of continuous-wave, high-brightness green laser radiation. Green lasers are particularly interesting for reliable and reproducible deep-penetration welding of copper or for pumping Ti:Sa oscillators. By intracavity second-harmonic generation in a thin-disk laser resonator designed for fundamental-mode operation, an output power of up to 403 W is demonstrated at a wavelength of 515 nm with almost diffraction-limited beam quality. The unprecedented optical efficiency of 40.7% of green output power with respect to the pump power of the thin-disk laser is enabled by the intracavity use of a highly efficient grating waveguide mirror, which combines the functions of wavelength stabilization and spectral narrowing, as well as polarization selection in a single element.
- 2 May 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (9) , 11376-11381
Amplification of cylindrically polarized laser beams in single crystal fiber amplifiers
Yb:YAG single crystal fiber (SCF) amplifiers have recently drawn much attention in the field of amplification of ultra-short pulses. In this paper, we report on the use of SCF amplifiers for the amplification of cylindrically polarized laser beams, as such beams offer promising properties for numerous applications. While the amplification of cylindrically polarized beams is challenging with other amplifier designs due to thermally induced depolarization, we demonstrate the amplification of 32 W cylindrically polarized beams to an output power of 100 W. A measured degree of radial polarization after the SCF of about 95% indicates an excellent conservation of polarization.
- 2 May 2013
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (9) , 11376-11381
Amplification of cylindrically polarized laser beams in single crystal fiber amplifiers
Yb:YAG single crystal fiber (SCF) amplifiers have recently drawn much attention in the field of amplification of ultra-short pulses. In this paper, we report on the use of SCF amplifiers for the amplification of cylindrically polarized laser beams, as such beams offer promising properties for numerous applications. While the amplification of cylindrically polarized beams is challenging with other amplifier designs due to thermally induced depolarization, we demonstrate the amplification of 32 W cylindrically polarized beams to an output power of 100 W. A measured degree of radial polarization after the SCF of about 95% indicates an excellent conservation of polarization.
- 4 December 2012
- Published by Optica Publishing Group in Optics Letters
- Vol. 37 (24) , 5033-5035
Power scaling of fundamental-mode thin-disk lasers using intracavity deformable mirrors
Since its first demonstration almost two decades ago, the concept of the thin-disk laser has proven its excellent power scaling properties, enabling output powers in the multi-kW-range at decent beam quality. However, power scalability in fundamental-mode operation is limited by severe diffraction losses arising from thermally induced aspherical wavefront distortions in the pumped laser crystal. In order to compensate for these wavefront distortions, we have developed a deformable mirror concept based on pneumatic actuation, providing a step-like surface deformation with adaptable magnitude. Using one of these mirrors, we have achieved output powers as high as 815 W at nearly diffraction-limited beam quality () from a single disk, which is—to the best of the authors’ knowledge—the highest output power at this beam quality demonstrated so far.- 4 December 2012
- Published by Optica Publishing Group in Optics Letters
- Vol. 37 (24) , 5033-5035
Power scaling of fundamental-mode thin-disk lasers using intracavity deformable mirrors
Since its first demonstration almost two decades ago, the concept of the thin-disk laser has proven its excellent power scaling properties, enabling output powers in the multi-kW-range at decent beam quality. However, power scalability in fundamental-mode operation is limited by severe diffraction losses arising from thermally induced aspherical wavefront distortions in the pumped laser crystal. In order to compensate for these wavefront distortions, we have developed a deformable mirror concept based on pneumatic actuation, providing a step-like surface deformation with adaptable magnitude. Using one of these mirrors, we have achieved output powers as high as 815 W at nearly diffraction-limited beam quality () from a single disk, which is—to the best of the authors’ knowledge—the highest output power at this beam quality demonstrated so far.- 9 February 2012
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8236
Active mirrors for intra-cavity compensation of the aspherical thermal lens in thin-disk lasers
With the development of the thin-disk laser, thermal lensing issues have been drastically reduced. However, fundamental mode operation at high output powers is still limited by severe efficiency reductions due to diffraction losses introduced by the temperature gradient at the boundary of the pump spot. To countervail these aspherical wavefront deformations, high-power laser mirrors featuring deformable surfaces have been developed. The surface of these mirrors resembles the shape of the thermally induced change of optical path length in the pumped laser crystal. The magnitude of the surface deformation can be actively controlled to provide optimal compensation at different power levels.
- 9 February 2012
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8236
Active mirrors for intra-cavity compensation of the aspherical thermal lens in thin-disk lasers
With the development of the thin-disk laser, thermal lensing issues have been drastically reduced. However, fundamental mode operation at high output powers is still limited by severe efficiency reductions due to diffraction losses introduced by the temperature gradient at the boundary of the pump spot. To countervail these aspherical wavefront deformations, high-power laser mirrors featuring deformable surfaces have been developed. The surface of these mirrors resembles the shape of the thermally induced change of optical path length in the pumped laser crystal. The magnitude of the surface deformation can be actively controlled to provide optimal compensation at different power levels.