Investigation of Impact Energy Absorption of AA6061 and Composites: Role of Post-Aging Cooling Methods
Open Access
- 27 September 2023
- journal article
- research article
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 17 (66) , 261-272
Abstract
Al6061 and its composites are widely employed in applications requiring high strength and impact resistance. Heat treatment, particularly ageing, is a well-established method for enhancing the mechanical properties of these composites. However, the influence of post-ageing cooling methods on the impact energy absorption capacity of Al6061 and its composites remains inadequately understood. This investigation aims to examine the impact energy absorption of Al6061 and its composites after ageing at 460°C for 2 hours, employing different cooling methods, including furnace cooling, air cooling, and water cooling. The composites were produced using the stir casting technique with varying weight fractions of graphite and SiC particles based on Taguchi's design of experiments. Charpy impact tests were conducted using a specialised testing machine. The results reveal that the impact energy absorption capacity of the composites is influenced by the cooling method employed after the ageing treatment. Furnace cooling demonstrated the highest impact energy absorption capacity compared to the other cooling methods, exhibiting a 28% increase compared to the monolithic aluminium alloy. Furthermore, it was observed that the impact energy absorption capacity of the composites did not improve with an increase in the weight fraction of SiC particles, while the addition of graphite negatively impacted the absorption capacity.Keywords
This publication has 18 references indexed in Scilit:
- Investigating the precipitation hardening of 2024 aluminium alloy under different quenching mediaMaterials Today: Proceedings, 2022
- Optimization of Process Parameters of Fracture Toughness Using Simulation Technique Considering Aluminum–Graphite CompositesTransactions of the Indian Institute of Metals, 2020
- Experimental study of quenching agents on Al6061–Al2O3 composite: Effects of quenching treatment to microstructure and hardness characteristicsResults in Engineering, 2020
- Effect of cooling rate on microstructure and mechanical properties of an Al-5.0Mg-3.0Zn-1.0Cu cast alloyJournal of Alloys and Compounds, 2019
- Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface compositesSurface and Coatings Technology, 2019
- Generation of mechanically mixed layer during wear in hybrid aluminum MMC under as-cast and age hardened conditionsSN Applied Sciences, 2019
- Effect of Different Cooling Rates Condition on Thermal Profile and Microstructure of Aluminium 6061Procedia Engineering, 2017
- Influence of quenching cooling rate on residual stress and tensile properties of 2A14 aluminum alloy forgingsMaterials Science and Engineering: A, 2016
- Influence of cooling rate after homogenization on the flow behavior of aluminum alloy 7050 under hot compressionMaterials Science and Engineering: A, 2010
- Residual stress reduction in 7175-T73, 6061-T6 and 2017A-T4 aluminium alloys using quench factor analysisJournal of Materials Processing Technology, 2004