Hareesha Guddhur
Research Subjects
Hareesha Guddhur has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Saleemsab Doddamani
Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, India
4 shared publications - B. K. Naveen Kumar
Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bengaluru, Karnataka, India
2 shared publications - A. M. Rajesh
Department of Mechanical Engineering, S.J.M. Institute of Technology, Chitradurga, India
1 shared publication - Afroz Khan
Department of Civil Engineering, Government Engineering College, Gangavathi, Karnataka, India
1 shared publication - Anilkumar S. Kallimani
Department of Mechanical Engineering, Government Engineering College, HuvinaHadagali, Karnataka, India
1 shared publication - Chikkanna Naganna
Department of Aerospace Propulsion Technology, Visvesvaraya Technological University, PG Centre Muddenhalli 2 , Chickballapur 562101, Karnataka, India
1 shared publication
Latest Publications
- Open Access
- 20 February 2025
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 19 (72) , 148-161
Mechanical Properties of SiC Nanoparticle-Reinforced Al-2024 Alloy
This study investigates the mechanical properties of Al-2024 alloy reinforced with SiC nanoparticles, highlighting the effectiveness of ultrasonic-assisted stir casting in achieving uniform dispersion of the nanoparticles. The aim is to enhance the material's inherent limitations in hardness and overall mechanical performance under demanding conditions by incorporating SiC nanoparticles. The experimental investigation explores varying SiC content (1%, 2%, 3%, and 4%) and its relationship with tensile strength and hardness. The results indicate a substantial 31% enhancement in hardness and a 25% improvement in tensile strength, demonstrating the effectiveness of nanoparticle reinforcement. Furthermore, several strengthening mechanisms were found to be important contributors to yield strength, including the Orowan mechanism, dislocation strengthening, and grain refinement strengthening. A maximum variation of 13% between the experimental and predicted yield strength of the Al2024-SiCnp composite confirms the reliability of the predictive models employed. Overall, the results support SiC nanoparticles' ability to improve Al-2024 composites' mechanical characteristics for cutting-edge engineering uses.
- 20 February 2025
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 19 (72) , 148-161
Open AccessMechanical Properties of SiC Nanoparticle-Reinforced Al-2024 Alloy
This study investigates the mechanical properties of Al-2024 alloy reinforced with SiC nanoparticles, highlighting the effectiveness of ultrasonic-assisted stir casting in achieving uniform dispersion of the nanoparticles. The aim is to enhance the material's inherent limitations in hardness and overall mechanical performance under demanding conditions by incorporating SiC nanoparticles. The experimental investigation explores varying SiC content (1%, 2%, 3%, and 4%) and its relationship with tensile strength and hardness. The results indicate a substantial 31% enhancement in hardness and a 25% improvement in tensile strength, demonstrating the effectiveness of nanoparticle reinforcement. Furthermore, several strengthening mechanisms were found to be important contributors to yield strength, including the Orowan mechanism, dislocation strengthening, and grain refinement strengthening. A maximum variation of 13% between the experimental and predicted yield strength of the Al2024-SiCnp composite confirms the reliability of the predictive models employed. Overall, the results support SiC nanoparticles' ability to improve Al-2024 composites' mechanical characteristics for cutting-edge engineering uses.
- Open Access
- 13 December 2024
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 19 (71) , 330-340
Development and mechanical characterization of eggshell bio-filler based hybrid composites
Hybridization of natural fiber composite by incorporating waste- derived fillers has been identified as a promising sustainable technique to develop environmentally friendly and economical composites with enhanced mechanical properties. This study explores the mechanical performance of hybrid bamboo-epoxy composites incorporated with bio filler derived from waste chicken eggshells. Compression molding was employed to develop unfilled and eggshell powder filled bamboo composites by varying eggshell content (2, 4, and 6 wt%) while maintaining constant bamboo fiber wt%. Composites were tested for mechanical properties by performing tensile test, flexural test, and impact test per ASTM standards. Results indicated that eggshell filler inclusion significantly modifies the tensile, flexural, and impact strength properties of base bamboo composite. Adding eggshell filler enhanced tensile and flexural properties which was attributed to improved interfacial bonding and efficient stress transfer. Optimal filler was achieved for composites with 4 wt % eggshell exhibiting 13.5% improvement in tensile strength and 16.4% improvement in flexural strength. While reduction in impact strength observed was attributed to incorporation of inorganic eggshell filler which mainly consists of CaCo3 content. The fractography studies revealed the improved fiber-matrix interaction with the inclusion of filler, reduced fiber pullouts, and failure by fiber breakage supporting the observed experimental results.
- 13 December 2024
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 19 (71) , 330-340
Open AccessDevelopment and mechanical characterization of eggshell bio-filler based hybrid composites
Hybridization of natural fiber composite by incorporating waste- derived fillers has been identified as a promising sustainable technique to develop environmentally friendly and economical composites with enhanced mechanical properties. This study explores the mechanical performance of hybrid bamboo-epoxy composites incorporated with bio filler derived from waste chicken eggshells. Compression molding was employed to develop unfilled and eggshell powder filled bamboo composites by varying eggshell content (2, 4, and 6 wt%) while maintaining constant bamboo fiber wt%. Composites were tested for mechanical properties by performing tensile test, flexural test, and impact test per ASTM standards. Results indicated that eggshell filler inclusion significantly modifies the tensile, flexural, and impact strength properties of base bamboo composite. Adding eggshell filler enhanced tensile and flexural properties which was attributed to improved interfacial bonding and efficient stress transfer. Optimal filler was achieved for composites with 4 wt % eggshell exhibiting 13.5% improvement in tensile strength and 16.4% improvement in flexural strength. While reduction in impact strength observed was attributed to incorporation of inorganic eggshell filler which mainly consists of CaCo3 content. The fractography studies revealed the improved fiber-matrix interaction with the inclusion of filler, reduced fiber pullouts, and failure by fiber breakage supporting the observed experimental results.
- 17 July 2024
- Published by Springer Nature in Journal of Bio- and Tribo-Corrosion
- Vol. 10 (3) , 1-11
Effects of Addition of Graphite on the Tribological Behaviour of Al7075-SiC Hybrid Composites Using Design of Experiments
- 17 July 2024
- Published by Springer Nature in Journal of Bio- and Tribo-Corrosion
- Vol. 10 (3) , 1-11
Effects of Addition of Graphite on the Tribological Behaviour of Al7075-SiC Hybrid Composites Using Design of Experiments
- Open Access
- 27 September 2023
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 17 (66) , 261-272
Investigation of Impact Energy Absorption of AA6061 and Composites: Role of Post-Aging Cooling Methods
Al6061 and its composites are widely employed in applications requiring high strength and impact resistance. Heat treatment, particularly ageing, is a well-established method for enhancing the mechanical properties of these composites. However, the influence of post-ageing cooling methods on the impact energy absorption capacity of Al6061 and its composites remains inadequately understood. This investigation aims to examine the impact energy absorption of Al6061 and its composites after ageing at 460°C for 2 hours, employing different cooling methods, including furnace cooling, air cooling, and water cooling. The composites were produced using the stir casting technique with varying weight fractions of graphite and SiC particles based on Taguchi's design of experiments. Charpy impact tests were conducted using a specialised testing machine. The results reveal that the impact energy absorption capacity of the composites is influenced by the cooling method employed after the ageing treatment. Furnace cooling demonstrated the highest impact energy absorption capacity compared to the other cooling methods, exhibiting a 28% increase compared to the monolithic aluminium alloy. Furthermore, it was observed that the impact energy absorption capacity of the composites did not improve with an increase in the weight fraction of SiC particles, while the addition of graphite negatively impacted the absorption capacity.
- 27 September 2023
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 17 (66) , 261-272
Open AccessInvestigation of Impact Energy Absorption of AA6061 and Composites: Role of Post-Aging Cooling Methods
Al6061 and its composites are widely employed in applications requiring high strength and impact resistance. Heat treatment, particularly ageing, is a well-established method for enhancing the mechanical properties of these composites. However, the influence of post-ageing cooling methods on the impact energy absorption capacity of Al6061 and its composites remains inadequately understood. This investigation aims to examine the impact energy absorption of Al6061 and its composites after ageing at 460°C for 2 hours, employing different cooling methods, including furnace cooling, air cooling, and water cooling. The composites were produced using the stir casting technique with varying weight fractions of graphite and SiC particles based on Taguchi's design of experiments. Charpy impact tests were conducted using a specialised testing machine. The results reveal that the impact energy absorption capacity of the composites is influenced by the cooling method employed after the ageing treatment. Furnace cooling demonstrated the highest impact energy absorption capacity compared to the other cooling methods, exhibiting a 28% increase compared to the monolithic aluminium alloy. Furthermore, it was observed that the impact energy absorption capacity of the composites did not improve with an increase in the weight fraction of SiC particles, while the addition of graphite negatively impacted the absorption capacity.
- Open Access
- 2 April 2021
- Published by AccScience Publishing in An International Journal of Optimization and Control: Theories & Applications (IJOCTA)
- Vol. 11 (2) , 152-157
Taguchi’s method of optimization of fracture toughness parameters of Al-SiCp composite using compact tension specimens
The objective of this work is to investigate the process parameters which influence the fracture toughness of aluminum-silicon carbide particulate composite prepared using the stir casting technique. The Taguchi’s design of experiments is conducted to analyze the process parameters. Three parameters considered are composition of material, grain size and a/W ratio. From the Taguchi’s analysis, on compact tension specimens, aluminum 6061 reinforced with 9 wt% of the silicon carbide particles composite and a/W ratio of 0.45 are considered to be optimized parameters. Taguchi's technique result shows that the increment in the a/W ratio causes decrement in the load carrying capacity of the composite. Whereas the fine grain size of silicon carbide have better toughness values. From the ANOVA outcomes it is clear that the composition and a/W ratio of the geometry has more influence on the fracture toughness than the grain size of reinforcement.
- 2 April 2021
- Published by AccScience Publishing in An International Journal of Optimization and Control: Theories & Applications (IJOCTA)
- Vol. 11 (2) , 152-157
Open AccessTaguchi’s method of optimization of fracture toughness parameters of Al-SiCp composite using compact tension specimens
The objective of this work is to investigate the process parameters which influence the fracture toughness of aluminum-silicon carbide particulate composite prepared using the stir casting technique. The Taguchi’s design of experiments is conducted to analyze the process parameters. Three parameters considered are composition of material, grain size and a/W ratio. From the Taguchi’s analysis, on compact tension specimens, aluminum 6061 reinforced with 9 wt% of the silicon carbide particles composite and a/W ratio of 0.45 are considered to be optimized parameters. Taguchi's technique result shows that the increment in the a/W ratio causes decrement in the load carrying capacity of the composite. Whereas the fine grain size of silicon carbide have better toughness values. From the ANOVA outcomes it is clear that the composition and a/W ratio of the geometry has more influence on the fracture toughness than the grain size of reinforcement.
- Open Access
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1065 (1) , 012036
Finite Element Simulation of Fracture Toughness of Al6061 Reinforced with Silicon Carbide
The main objective of the work is to study the fracture behaviour of AA6061-Silicon Carbide material using finite element method. Fracture toughness analysis of AA6061-Silicon Carbide composite has been carried out using finite element methods. Modelling of compact tension specimens was utilized to analyze the fracture toughness using the ANSYS tool. From the results of the comparison, it is recommended that AA6061-9 wt% silicon carbide particulate composite material can be potentially utilized as a replacement of AA6061 in the aerospace application such as helicopter rotor blades.
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1065 (1) , 012036
Open AccessFinite Element Simulation of Fracture Toughness of Al6061 Reinforced with Silicon Carbide
The main objective of the work is to study the fracture behaviour of AA6061-Silicon Carbide material using finite element method. Fracture toughness analysis of AA6061-Silicon Carbide composite has been carried out using finite element methods. Modelling of compact tension specimens was utilized to analyze the fracture toughness using the ANSYS tool. From the results of the comparison, it is recommended that AA6061-9 wt% silicon carbide particulate composite material can be potentially utilized as a replacement of AA6061 in the aerospace application such as helicopter rotor blades.