Performance of thermally modified wood during 14 years of outdoor exposure
Authors:
Open Access
- 2 April 2016
- journal article
- research article
- Published by SAGE Publications in International Wood Products Journal
- Vol. 7 (2) , 89-95
Abstract
The long-term outdoor performance of thermally modified timber (TMT) from four different industrial heat treatment processes was investigated. Graveyard tests (in-ground exposure, use class (UC) 4) and horizontal double layer tests (above ground, UC 3.2) with and without artificial shading were performed. Results from field tests after 14 years of exposure are compared with results from short-term laboratory tests with pure cultures of wood-destroying basidiomycetes and terrestrial microcosms (TMC). The thermally modified material used in the study was: Plato wood (Norway spruce, Picea abies, NL), Thermowood (Scots pine, Pinus sylvestris, FI), New Option Wood (NOW, Maritime pine, Pinus maritima, F), and oil-heat treated (OHT) wood (Scots pine, DE). In addition, Scots pine sapwood and heartwood, Douglas fir (Pseudotsuga menziesii), Sessile oak (Quercus petraea), and CCB treated Scots pine sapwood (0.7 and 2.8% CCB) were examined as control and reference materials. Based on results from laboratory standard tests with brown and white rot causing basidiomycetes all thermally modified materials were classified as durable to slightly durable (durability class (DC) 2–4). In TMC tests with unsterile soil against soft rot and other soil-inhabiting micro-organisms all TMT were classified as durable (DC 2). Consequently, all TMT showed remarkably increased durability compared to the untreated controls (DC 5) and reference species (DC 3–5). In contrast, according to the results of the graveyard tests all four TMTs were classified less durable (DC 4) as well as Douglas fir and Sessile oak. Also exposure above ground in horizontal double layers led to a significantly worse durability compared to the one calculated on the basis of lab test results: Plato, Thermowood, and NOW were classified as ‘less durable’ (DC 4), OHT performed significantly better. Since not all specimens had failed its durability was preliminarily classified as ‘very durable’ (DC 1). On the basis of 14 years outdoor testing under different exposure conditions durability of four industrially produced TMTs turned out to be clearly less than lab test results indicated. Neither in-ground nor above ground performance met the expectations based on testing with basidiomycete cultures and TMCs. Therefore, short-term durability test methods need improvements regarding their predictive capability for modified wood. In summary, the use of TMT in ground as well as under severe above ground conditions cannot be recommended based on the findings from this field test study.Keywords
This publication has 9 references indexed in Scilit:
- Modelling timber decay caused by brown rot fungiMaterials and Structures, 2015
- Durability of thermally modified sapwood and heartwood of Scots pine and Norway spruce in the modified double layer testWood Material Science & Engineering, 2015
- European standards on durability and performance of wood and wood-based products – Trends and challengesWood Material Science & Engineering, 2014
- Durability of English oak (Quercus robur L.) – Comparison of decay progress and resistance under various laboratory and field conditionsInternational Biodeterioration & Biodegradation, 2013
- Shading Aboveground L-Joint and Lap-Joint Tests: Comparison of White Pine and Sugar Maple Test AssembliesForest Products Journal, 2011
- Forming of a functional biofilm on wood surfacesEcological Engineering, 2010
- Comparative studies on the in-ground and above-ground durability of European oak heartwood (Quercus petraea Liebl. and Quercus robur L.)European Journal of Wood and Wood Products, 2009
- Influence of wood moisture content and wood temperature on fungal decay in the field: observations in different micro-climatesWood Science and Technology, 2008
- Durability of thermally modified timber from industrial-scale processes in different use classes: Results from laboratory and field testsWood Material Science & Engineering, 2007