Recycling of Poly(Propylene) Based Car Bumpers in the Perspective of Polyolefin Nanoclay Composite Film Production
Open Access
Abstract
This study uses the melt compounding method to recycle polypropylene-based car bumper waste (PP-CBW) in order to produce nanocomposite films for mulch application. The nanocomposite films were compounded by mixing virgin linear low-density polyethylene (LLDPE) with PP-CBW at a constant ratio of 4:1 in the presence of different percentages of nanofillers. Nanocomposites reinforced with nanoclays were compatibilized with an anhydride grafted polyethylene (PE-g-MAH), at a constant compatibilizer-to-clay ratio equal to 3, to improve the adherence between the nonpolar matrix and the hydrophilic nanoclay and acrylic paint present in the car bumper. An extruder with a corotating twin screw was used to produce blends of different compositions. To create nanocomposite films, the mixtures were further processed in a blown film extruder. The effect of the presence of nanoclays on the barrier, thermal, and mechanical properties of the nanocomposite films was investigated. The dispersion of clay layers in the matrix was examined by atomic force microscopy (AFM). The results indicate that 3 wt% of clay loading maximized the tensile strength in the transverse direction (TD) and machine direction (MD). A 1 wt% clay loading increased the MD tear resistance by 66% and manifested an optimum dart impact strength. Significant improvements in thermal and barrier properties were also achieved in the presence of 3 wt% clay loading.Keywords
Funding Information
- CNRS-USEK program (3/378)
- Indevco PACT (Polymer Application Center for Technology) R&D Center (3/378)
This publication has 31 references indexed in Scilit:
- Influence of silane functionalized nanoclay on the barrier, mechanical and hydrophobic properties by clay nanocomposite films in an aggressive chloride mediumColloids and Surfaces A: Physicochemical and Engineering Aspects, 2021
- Development of blown film linear low‐density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphologyJournal of Applied Polymer Science, 2019
- Recycling of Plastic Mixture Wastes as Carrier Resin for Short Glass Fiber CompositesWaste and Biomass Valorization, 2018
- Thermal, mechanical, and barrier properties of polyethylene/surlyn/organoclay nanocomposites blown films prepared by different mixing methodsJournal of Vinyl and Additive Technology, 2014
- Impact response of recycled polypropylene-based composites under a wide range of temperature: Effect of filler content and recyclingComposites Science and Technology, 2014
- Polypropylene/high impact polystyrene blend nanocomposites obtained from E-waste: evaluation of mechanical, thermal and morphological propertiesInternational Journal of Plastics Technology, 2011
- New (PP/EPR)/nano‐CaCO3 based formulations in the perspective of polymer recycling. Effect of nanoparticles properties and compatibilizersPolymers for Advanced Technologies, 2010
- Influence of nanoclay on properties of HDPE/wood compositesJournal of Applied Polymer Science, 2007
- Effect of clay on mechanical and gas barrier properties of blown film LDPE/clay nanocompositesJournal of Applied Polymer Science, 2007
- Polyethylene/maleic anhydride grafted polyethylene/organic‐montmorillonite nanocomposites. I. Preparation, microstructure, and mechanical propertiesJournal of Applied Polymer Science, 2004