Evaluation and Implementation of EMI/EMC Compliance for a Proposed Power Electronics-Based Converter Topology for Electric Vehicles
Open Access
- 22 October 2024
- journal article
- research article
- Published by Kaunas University of Technology (KTU) in Elektronika ir Elektrotechnika
- Vol. 30 (5) , 22-30
Abstract
The demand for high-gain, efficient, and cost-effective power converters with simple control mechanisms to connect electric vehicle batteries to the grid is increasing. This study introduces a switched capacitor-based power boost converter circuit to meet these needs. The minimal number of power switches in the circuit simplifies control operations and improves practical applicability. The proposed converter boosts the battery pack voltage by a factor of 5 and 11 for duty ratios of 0.5 and 0.8, respectively, which is significant compared to conventional boost converters. However, designing an electromagnetic interference (EMI) filter is crucial when a power converter board requires the application of a wide range of switching frequencies to enhance electromagnetic compatibility (EMC) immunity. Therefore, as the next step, the EMI/EMC filter design stages were discussed for the proposed converter. For this purpose, 15 printed circuit board (PCB) design rules were checked using the Altium Designer EMI Design Rule Checker, and board EMI/EMC compatibility was analysed. The resonance between the power and ground layers in the PCB was assessed using the plane resonance analyser. The results of simulation and laboratory tests are presented, which confirms the theoretical studies. On the basis of the software results, the points on the electronic board most susceptible to visual interferences have been identified. To minimise these EMI/EMC errors, it is suggested to add electronic components, such as capacitors, at these points according to mathematical and software findings.Keywords
This publication has 18 references indexed in Scilit:
- High-Performance Single Switch High Step-Up Quadratic DC-DC Converter With Switched Capacitor CellIEEE Access, 2024
- A Family of Ladder Multi-Resonant Switched-Capacitor Converters With Extended Voltage Gain Range and Complete Soft ChargingIEEE Transactions on Industry Applications, 2023
- New unidirectional step-up DC-DC converter for fuel-cell vehicle: Design and implementationElectric Power Systems Research, 2022
- High step‐up combined boost‐Cuk converter with switched‐inductorIET Power Electronics, 2022
- Input Current Ripple Reduction in a Step-Up DC–DC Switched-Capacitor Switched-Inductor ConverterIEEE Access, 2022
- Design of a Modified Single-Stage and Multistage EMI Filter to Attenuate Common-Mode and Differential-Mode Noises in SiC InverterIEEE Journal of Emerging and Selected Topics in Power Electronics, 2021
- Parameter Estimation of Vehicle Batteries in V2G Systems: An Exogenous Function-Based ApproachIEEE Transactions on Industrial Electronics, 2021
- Seven Switching Techniques for the Ladder Resonant Switched-Capacitor Converters With Full-Range Voltage RegulationIEEE Transactions on Industrial Electronics, 2021
- Sliding mode controller-based switched-capacitor-based high DC gain and low voltage stress DC-DC boost converter for photovoltaic applicationsInternational Journal of Electrical Power & Energy Systems, 2021
- A State-of-the-Art Review on Conducted Electromagnetic Interference in Non-Isolated DC to DC ConvertersIEEE Access, 2019