Hakan Tekin has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design and Implementation of the Python-Driven Digital Horn System: A Novel Approach for Electric Vehicle Sound Systems

    by Hakan Tekin, Hikmet Karşıyaka, Davut Ertekin

    Electric and hybrid vehicles are known for their significant reduction in road noise. However, concerns have emerged regarding their silent operation, potentially increasing risks for other road users. To mitigate this, the Acoustic Vehicle Alert System (AVAS) has been mandated by regulations such as R138 by UNECE in the USA and Europe. This regulation dictates the generation of sound in electric vehicles of categories M and N1 during normal, reverse, and forward motion without the internal combustion engine engaged. Compliance involves meeting specific sound requirements based on vehicle mode and condition. This paper introduces a Python-based approach to designing digital horn sounds, leveraging music theory and signal processing techniques to replace traditional mechanical horns in electric vehicles equipped with AVAS devices. The aim is to offer a practical and efficient means of generating digital horn sounds using this software. The software includes an application capable of producing and customizing horn sounds, with the HornSoundGeneratorGUI class providing a user-friendly interface built with the Tkinter library. To validate the digital horn produced sounds by the software and ensure compliance with AVAS regulations, comprehensive electrical and acoustic tests were conducted in a fully equipped quality laboratory. The results demonstrated that the sound levels achieved met the required 105–107 dB/2 m standard specified by the regulation.


  • Open Access

    Evaluation and Implementation of EMI/EMC Compliance for a Proposed Power Electronics-Based Converter Topology for Electric Vehicles

    by Hakan Tekin, Seyit Vatansever, Davut Ertekin

    The demand for high-gain, efficient, and cost-effective power converters with simple control mechanisms to connect electric vehicle batteries to the grid is increasing. This study introduces a switched capacitor-based power boost converter circuit to meet these needs. The minimal number of power switches in the circuit simplifies control operations and improves practical applicability. The proposed converter boosts the battery pack voltage by a factor of 5 and 11 for duty ratios of 0.5 and 0.8, respectively, which is significant compared to conventional boost converters. However, designing an electromagnetic interference (EMI) filter is crucial when a power converter board requires the application of a wide range of switching frequencies to enhance electromagnetic compatibility (EMC) immunity. Therefore, as the next step, the EMI/EMC filter design stages were discussed for the proposed converter. For this purpose, 15 printed circuit board (PCB) design rules were checked using the Altium Designer EMI Design Rule Checker, and board EMI/EMC compatibility was analysed. The resonance between the power and ground layers in the PCB was assessed using the plane resonance analyser. The results of simulation and laboratory tests are presented, which confirms the theoretical studies. On the basis of the software results, the points on the electronic board most susceptible to visual interferences have been identified. To minimise these EMI/EMC errors, it is suggested to add electronic components, such as capacitors, at these points according to mathematical and software findings.


  • Open Access

    A Proposed Single-Input Multi-Output Battery-Connected DC–DC Buck–Boost Converter for Automotive Applications

    by Hakan Tekin, Göknur Setrekli, Eren Murtulu, Hikmet Karşıyaka, Davut Ertekin

    In the realm of electric vehicles (EVs), achieving diverse direct current (DC) voltage levels is essential to meet varying electrical load demands. This requires meticulous control of the battery voltage, which must be adjusted in line with specific load characteristics. Therefore, the integration of a well-designed power converter circuit is crucial, as it plays a pivotal role in generating different DC voltage outputs. In this study, we also consider the incorporation of two additional doubler/divider circuits at the end of the proposed converter, further enhancing its capacity to produce distinct DC voltage levels, thus increasing its versatility. The standout feature of the proposed converter lies in its remarkable ability to amplify DC voltages significantly. For instance, when the input battery voltage is set at 48 VDC with a duty cycle (D) of 0.8, the resulting output demonstrates a remarkable augmentation, producing voltages 18, 36, and 72 times higher than the input voltage. Conversely, with a reduced D of 0.2 while maintaining the input voltage at 48 VDC, the converter yields diminished voltages of 0.1875, 0.375, and 0.75 times the initial voltage. This adaptability, based on the parameterization of D, underscores the converter’s ability to cater to a wide range of voltage requirements. To oversee the intricate operations of this versatile converter, a high-speed DSP-based controller system is employed. It utilizes the renowned PID approach, known for its proficiency in navigating complex, nonlinear systems. Experimental results validate the theoretical and simulation findings, reaffirming the converter’s practical utility in EV applications. The study introduces a simple control mechanism with a single power switch, high efficiency for high-power applications, wide voltage range, especially with VDC and VMC cells, and continuous current operation for the load in CCM mode. This study underscores the significance of advanced power conversion systems in shaping the future of electric transportation.


  • A design for switched capacitor and single‐switch DC–DC boost converter by a small signal‐based PI controller

    by Davut Ertekin, Kübra Bulut, Hakan Tekin, Gerry Moschopoulos

    In this study, a switched capacitor (SC)‐based single‐switch DC–DC boost converter structure operating under the high voltage gain and the low duty ratio is proposed using the PI control technique. High current and voltage stresses across the power switches and power diodes can be reduced by using the projected SC block. In addition, the proposed converter can achieve high voltage gain through shorter duty cycles, which directly reduces the voltage stress and dynamic losses in the power semiconductors. On the other hand, because the proposed converter includes a single power switch under different output powers and different loads, the control process is simpler than multiswitch structures. With the proposed converter, an output voltage of 10 times greater rather than the input voltage is obtained at 0.57 of the duty cycle. In this study, the fundamental functions of the proposed converter and the controller design steps are analyzed mathematically and tested in MATLAB/SIMULINK environment. As a result of the analysis, it was determined that the proposed topology works with a high performance at high frequency and variable load ranges. To validate the proposed converter and theoretical calculations, a 200‐W prototype was established under a continuous conduction mode (CCM) working state, with 48‐VDC input voltage and 400‐VDC output voltage. Finally, the simulation results were tested and verified through the experimental results.