A 24.4 ppm/°C Voltage Mode Bandgap Reference With a 1.05V Supply
Top Cited Papers
- 27 October 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (4) , 1088-1092
Abstract
This paper proposes a sub-1V, voltage mode CMOS bandgap reference circuit. Conventionally, sub-1V references are obtained by converting PTAT and CTAT voltages to currents and summing them in the current domain. Such techniques have multiple operating points and cannot natively support applications that require PTAT currents in addition to a bandgap voltage. This work presents a voltage mode reference circuit, which adds a PTAT voltage with a scaled version of a CTAT voltage all within the sub-1V domain. Compared to current mode bandgaps, summing in voltage domain enables reduction of one CTAT current mirror stage and a significant reduction in PTAT current mirror ratio resulting in a reduced number of error sources. In addition, this circuit also natively supports applications that require PTAT current. A novel, high-accuracy self-biasing technique has been adopted to minimize the systematic offset induced temperature coefficient. A prototype designed in 45nm TSMC CMOS technology for a nominal voltage of 500mV demonstrates 24.4ppm/∘C temperature coefficient from -40∘C to 125∘C, 0.15% line regulation, and draws 7.2μA from a 1.05V supply.Keywords
This publication has 9 references indexed in Scilit:
- Untrimmed BGR of 1.1% $3\sigma$ Based on Dynamic-Biased Op Amp With Reduced ${V} _{\rm off}$IEEE Transactions on Circuits and Systems II: Express Briefs, 2019
- An Area-Efficient Current-Mode Bandgap Reference With Intrinsic Robust Start-Up BehaviorIEEE Transactions on Circuits and Systems II: Express Briefs, 2015
- A Single-Trim CMOS Bandgap Reference With a $3\sigma$ Inaccuracy of $\pm$0.15% From ${-}$40$^{\circ}$C to 125$^{\circ}$CIEEE Journal of Solid-State Circuits, 2011
- A Sub-1-V Low-Noise Bandgap Voltage ReferenceIEEE Journal of Solid-State Circuits, 2007
- A 1.4 V Supply CMOS Fractional Bandgap ReferenceIEEE Journal of Solid-State Circuits, 2007
- A CMOS bandgap reference circuit with sub-1-V operationIEEE Journal of Solid-State Circuits, 1999
- A precision curvature-compensated CMOS bandgap referenceIEEE Journal of Solid-State Circuits, 1983
- Accurate analysis of temperature effects in I/SUB c/V/SUB BE/ characteristics with application to bandgap reference sourcesIEEE Journal of Solid-State Circuits, 1980
- A simple three-terminal IC bandgap referenceIEEE Journal of Solid-State Circuits, 1974