Static Magnetic Field Impact on Laser Weld Bead Morphology of Sn-10%wt.Pb Alloy
Open Access
Abstract
Additive manufacturing (AM) offers significant potential but faces challenges in controlling rapid solidification processes due to thermal conditions. The application of magnetic fields provides a promising path to influence liquid metal behavior during solidification. Thermoelectromagnetic convection (TEMC) is one of the mechanisms by which an applied static magnetic field can induce melt flow, where thermal gradients at the solid–liquid interface generate thermoelectric currents, and in the presence of an external magnetic field induce Lorentz force that drives liquid convection, leading to enhanced heat transfer. This study investigates the impact of moderate static magnetic fields on the laser melting process of a Sn-10%wt.Pb alloy. It is found that applying a magnetic field significantly widens and deepens laser weld beads. Bead depth and width under different field strengths and orientations are measured. Numerical models are developed to calculate the TEMC current distribution and flow in the melt pool.Keywords
Funding Information
- ERDF Project (1.1.1.3/1/24/A/116)
- University of Latvia development program
This publication has 33 references indexed in Scilit:
- Model Experiment for the Investigation of Thermoelectric Magnetohydrodynamics in Metal Additive ManufacturingJOM, 2025
- Resolving thermal gradients and solidification velocities during laser melting of a refractory alloyAdditive Manufacturing, 2025
- Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturingAdditive Manufacturing, 2023
- Hot cracking evolution and formation mechanism in 2195 Al-Li alloy printed by laser powder bed fusionAdditive Manufacturing, 2022
- Revealing the mechanisms by which magneto-hydrodynamics disrupts solidification microstructuresActa Materialia, 2020
- Hot cracking behavior and mechanism of a third-generation Ni-based single-crystal superalloy during directed energy depositionAdditive Manufacturing, 2020
- Solid-State Metal Additive Manufacturing: A ReviewJOM, 2020
- Numerical modelling of heat transfer, mass transport and microstructure formation in a high deposition rate laser directed energy deposition processAdditive Manufacturing, 2020
- Influence of thermoelectric effects on the solid–liquid interface shape and cellular morphology in the mushy zone during the directional solidification of Al–Cu alloys under a magnetic fieldActa Materialia, 2007
- The surface tensions of Pb, Sn, and Pb-Sn alloysMetallurgical Transactions, 1971