Valters Dzelme
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Valters Dzelme has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
A. Jakovics
Laboratory for Mathematical Modelling of Environmental and Technological Processes, Department of Physics, University of Latvia, 23 Zellu street, Riga, Latvia
3 shared publicationsE. Baake
Institute of Electrotechnology, Leibniz University of Hannover, 4 Wilhelm Busch street, D-30167 Hannover, Germany
2 shared publicationsA. Chudnovsky
BIS Global Ltd., 79/81-15 Kr. Valdemara street, Riga, Latvia
1 shared publication- Aleksandrs Kleinhofs
Institute of Physics, University of Latvia, Jelgavas Street 3, LV-1004 Riga, Latvia
1 shared publication Andris Jakovics
Institute of Numerical Modelling , University of Latvia , 3 Jelgavas street , Riga , Latvia
1 shared publication- Andris Jakovics
Institute of Numerical Modelling, University of Latvia, Jelgavas Street 3, LV-1004 Riga, Latvia
1 shared publication
Latest Publications
- Open Access
Static Magnetic Field Impact on Laser Weld Bead Morphology of Sn-10%wt.Pb Alloy
Additive manufacturing (AM) offers significant potential but faces challenges in controlling rapid solidification processes due to thermal conditions. The application of magnetic fields provides a promising path to influence liquid metal behavior during solidification. Thermoelectromagnetic convection (TEMC) is one of the mechanisms by which an applied static magnetic field can induce melt flow, where thermal gradients at the solid–liquid interface generate thermoelectric currents, and in the presence of an external magnetic field induce Lorentz force that drives liquid convection, leading to enhanced heat transfer. This study investigates the impact of moderate static magnetic fields on the laser melting process of a Sn-10%wt.Pb alloy. It is found that applying a magnetic field significantly widens and deepens laser weld beads. Bead depth and width under different field strengths and orientations are measured. Numerical models are developed to calculate the TEMC current distribution and flow in the melt pool.
Open AccessStatic Magnetic Field Impact on Laser Weld Bead Morphology of Sn-10%wt.Pb Alloy
Additive manufacturing (AM) offers significant potential but faces challenges in controlling rapid solidification processes due to thermal conditions. The application of magnetic fields provides a promising path to influence liquid metal behavior during solidification. Thermoelectromagnetic convection (TEMC) is one of the mechanisms by which an applied static magnetic field can induce melt flow, where thermal gradients at the solid–liquid interface generate thermoelectric currents, and in the presence of an external magnetic field induce Lorentz force that drives liquid convection, leading to enhanced heat transfer. This study investigates the impact of moderate static magnetic fields on the laser melting process of a Sn-10%wt.Pb alloy. It is found that applying a magnetic field significantly widens and deepens laser weld beads. Bead depth and width under different field strengths and orientations are measured. Numerical models are developed to calculate the TEMC current distribution and flow in the melt pool.
- Open Access
- 1 January 2022
- Published by Walter de Gruyter GmbH in Environmental and Climate Technologies
- Vol. 26 (1) , 708-719
Thermal Comfort in Indoor Spaces with Radiant Capillary Heaters
Capillary heat exchangers are a great alternative to conventional radiators or electric heaters when used with heat pumps due to larger area and therefore a lower working temperature. In this work, we study thermal conditions in a model room using either capillary or conventional heaters. Experimental measurements in a special test building are used to validate and adjust numerical models. The results show that the vertical temperature distribution is similar with both heating systems, but air flow velocities are considerably higher and floor temperature is less uniform in case of radiator heating. Overall, the capillary system provides more uniform thermal conditions.
- 1 January 2022
- Published by Walter de Gruyter GmbH in Environmental and Climate Technologies
- Vol. 26 (1) , 708-719
Open AccessThermal Comfort in Indoor Spaces with Radiant Capillary Heaters
Capillary heat exchangers are a great alternative to conventional radiators or electric heaters when used with heat pumps due to larger area and therefore a lower working temperature. In this work, we study thermal conditions in a model room using either capillary or conventional heaters. Experimental measurements in a special test building are used to validate and adjust numerical models. The results show that the vertical temperature distribution is similar with both heating systems, but air flow velocities are considerably higher and floor temperature is less uniform in case of radiator heating. Overall, the capillary system provides more uniform thermal conditions.
- Open Access
Dynamic neutron imaging of argon bubble flow in liquid gallium in external magnetic field
This paper presents detailed results of neutron imaging of argon bubble flows in a rectangular liquid gallium vessel with and without the application of external horizontal magnetic field. The developed image processing algorithm is presented and its capability to extract physical information from images of low signal-to-noise ratio is demonstrated. Bubble parameters, velocity components, trajectories and relevant statistics were computed and analysed. A simpler version of the code was applied to the output of computational fluid dynamics simulations that reproduced the experiment. This work serves to further validate the neutron radiography as a suitable method for monitoring gas bubble flow in liquid metals, as well as to outline procedures that might help others to extract data from neutron radiography images with a low signal-to-noise ratio resulting from high frame rate acquisitions required to resolve rapid bubble motion.
Open AccessDynamic neutron imaging of argon bubble flow in liquid gallium in external magnetic field
This paper presents detailed results of neutron imaging of argon bubble flows in a rectangular liquid gallium vessel with and without the application of external horizontal magnetic field. The developed image processing algorithm is presented and its capability to extract physical information from images of low signal-to-noise ratio is demonstrated. Bubble parameters, velocity components, trajectories and relevant statistics were computed and analysed. A simpler version of the code was applied to the output of computational fluid dynamics simulations that reproduced the experiment. This work serves to further validate the neutron radiography as a suitable method for monitoring gas bubble flow in liquid metals, as well as to outline procedures that might help others to extract data from neutron radiography images with a low signal-to-noise ratio resulting from high frame rate acquisitions required to resolve rapid bubble motion.
- Open Access
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012046
Numerical modelling of liquid metal electromagnetic pump with rotating permanent magnets
In this work, we study rotating permanent magnet based liquid metal pump. Full 3D model of the pump is created and different approaches to electromagnetic force computation are investigated. First, we seek a possibility to model the permanent magnet block consisting of many separate magnets as a single block with equivalent analytically prescribed magnetization. Second, different approaches regarding coupling of electromagnetic field to fluid dynamics simulation are considered. Main results show that for pump integral parameter calculation, time-dependent coupling is not necessary, although it can lead to different velocity and turbulent structure distribution in the channel.
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012046
Open AccessNumerical modelling of liquid metal electromagnetic pump with rotating permanent magnets
In this work, we study rotating permanent magnet based liquid metal pump. Full 3D model of the pump is created and different approaches to electromagnetic force computation are investigated. First, we seek a possibility to model the permanent magnet block consisting of many separate magnets as a single block with equivalent analytically prescribed magnetization. Second, different approaches regarding coupling of electromagnetic field to fluid dynamics simulation are considered. Main results show that for pump integral parameter calculation, time-dependent coupling is not necessary, although it can lead to different velocity and turbulent structure distribution in the channel.
- Open Access
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012047
Numerical and experimental study of liquid metal stirring by rotating permanent magnets
In this work, we study liquid gallium stirring by rotating permanent magnets. We demonstrate possibility of easily creating different flow patterns by rotating permanent magnets, which can be industrially important for controlling heat and mass transfer processes in the system. Unlike the typical approach of simulating magnet rotation as a transient problem and time-averaging the Lorentz forces, we solve the magnet rotation as a harmonic (frequency domain) problem, which leads to forces equal to time-averaged ones and decreases the simulation time considerably. Numerical results are validated using qualitative flow structure results from the neutron radiography visualization of tracer particles and quantitative data from Ultrasound Doppler velocimetry.
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012047
Open AccessNumerical and experimental study of liquid metal stirring by rotating permanent magnets
In this work, we study liquid gallium stirring by rotating permanent magnets. We demonstrate possibility of easily creating different flow patterns by rotating permanent magnets, which can be industrially important for controlling heat and mass transfer processes in the system. Unlike the typical approach of simulating magnet rotation as a transient problem and time-averaging the Lorentz forces, we solve the magnet rotation as a harmonic (frequency domain) problem, which leads to forces equal to time-averaged ones and decreases the simulation time considerably. Numerical results are validated using qualitative flow structure results from the neutron radiography visualization of tracer particles and quantitative data from Ultrasound Doppler velocimetry.
- Open Access
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012083
Simulation of electrically induced vortical flows
In this work, we study electrically induced flows numerically using open-source software and experimentally. Two systems are considered - single and multiphase (free surface) flows driven by axisymmetric DC and AC current injection. We investigate characteristic velocity and free surface deformation dependence on the injected current and validate it with experimental data. Results show that maximum axial velocity is a linear function of injected current, but free surface deformations are approximately proportional to current squared.
- 13 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 424 (1) , 012083
Open AccessSimulation of electrically induced vortical flows
In this work, we study electrically induced flows numerically using open-source software and experimentally. Two systems are considered - single and multiphase (free surface) flows driven by axisymmetric DC and AC current injection. We investigate characteristic velocity and free surface deformation dependence on the injected current and validate it with experimental data. Results show that maximum axial velocity is a linear function of injected current, but free surface deformations are approximately proportional to current squared.