Investigation of ultra-thin gate oxide reliability behavior by separate characterization of soft breakdown and hard breakdown
Authors:
- H. WurzerHWH. Wurzer
- M. KerberMKM. Kerber
- I. EiseleIEI. Eisele
- 7 November 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 40-47
Abstract
It is shown in this work that the soft breakdown can follow a significantly different temperature and field acceleration behavior than the dielectric breakdown (hard breakdown). These properties have a strong influence on reliability prediction of ultra-thin oxides and can result in misinterpretation if soft breakdown and hard breakdown events are mixed up during gate oxide reliability testing. The activation energy and the field acceleration of the soft breakdown are compared to the disturbed-bond breakage process proposed in the thermochemical E-model. It is concluded that soft breakdown can be caused by H-Si and H-O bond breakage due to the electric field in the oxide. The activation energy for soft breakdown also indicates that formation of a soft breakdown path is influenced by hydrogen diffusion in the oxide.Keywords
This publication has 17 references indexed in Scilit:
- Gate oxides in 50 nm devices: thickness uniformity improves projected reliability2003
- Quasi-breakdown of ultrathin gate oxide under high field stress2002
- Reliability projection for ultra-thin oxides at low voltage2002
- Influence of gate oxide breakdown on MOSFET device operationMicroelectronics Reliability, 2000
- Field and temperature dependence of TDDB of ultrathin gate oxideIEEE Electron Device Letters, 1999
- Non-Arrhenius temperature dependence of reliability in ultrathin silicon dioxide filmsApplied Physics Letters, 1999
- Temperature acceleration of oxide breakdown and its impact on ultra-thin gate oxide reliability1999
- A concept of gate oxide lifetime limited by "B-mode" stress induced leakage currents in direct tunneling regime1999
- Field and temperature acceleration model for time-dependent dielectric breakdownIEEE Transactions on Electron Devices, 1999
- Definition of dielectric breakdown for ultra thin (<2 nm) gate oxidesSolid-State Electronics, 1997