Effects of Chromium and Aluminum Additions on High-Entropy Alloys of the NbTiCrAl System: Development and Characterization
Open Access
- 1 January 2025
- journal article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1)
Abstract
This study investigates the design, synthesis, and characterization of novel high-entropy alloys (HEAs) in the NbTiCrAl system, focusing on the compositions NbTi, Nb7Ti7Cr2, Nb7Ti7Al2, Nb7Ti7Cr1Al1, and Nb3Ti3Cr1Al1. Microstructural analysis identified a single-phase BCC solid solution with dendritic structure, where compositional segregation is driven by melting point differences, with Ti, Cr, and Al migrating to interdendritic regions. Mechanical testing demonstrated that Cr and Al additions significantly improved hardness and strength, with Nb3Ti3Cr1Al1 exhibiting the highest microhardness (387.9 ± 6.1 HV0.5) and compressive yield strength (986.4 ± 70.0 MPa). Statistical analysis through a 22 full-factorial + central point design and ANOVA indicated that Cr predominantly influences the mechanical properties, with minimal interaction from Al. Multivariable linear regression models were developed to predict mechanical performance. These findings underscore the importance of Cr and Al balance for phase stability and mechanical properties, establishing the NbTiCrAl system as a promising candidate for advanced structural applications.Keywords
Funding Information
- National Science Centre (UMO-2021/43/B/ST5/01907)
This publication has 55 references indexed in Scilit:
- TiNbCr Multi-Principal Element Alloy Oxidation Behavior in Air at 800–1000 °CHigh Temperature Corrosion of Materials, 2024
- Refractory High-Entropy Alloy Coatings for High-Temperature Aerospace and Energy ApplicationsJournal of Thermal Spray Technology, 2022
- Current Status of Research on the Oxidation Behavior of Refractory High Entropy AlloysAdvanced Engineering Materials, 2021
- Effects of Cr Content on Microstructure and Mechanical Properties of WMoNbTiCr High-Entropy AlloysJournal of Materials Engineering and Performance, 2020
- Contribution of Lattice Distortion to Solid Solution Strengthening in a Series of Refractory High Entropy AlloysMetallurgical and Materials Transactions A, 2017
- Microstructure and Properties of Aluminum-Containing Refractory High-Entropy AlloysJOM, 2014
- A new approach of designing superalloys for low densityJOM, 2010
- Solid‐Solution Phase Formation Rules for Multi‐component AlloysAdvanced Engineering Materials, 2008
- A review of very-high-temperature Nb-silicide-based compositesMetallurgical and Materials Transactions A, 2003
- Silicide-matrix materials for high-temperature applicationsJOM, 1989