Wojciech Polkowski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wojciech Polkowski has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
Adelajda Polkowska
Łukasiewicz Research Network – Krakow Institute of Technology, Krakow, Poland
14 shared publications- Donatella Giuranno
Institute of Condensed Matter Chemistry and Technologies for Energy, National Research Council of Italy (ICMATE-CNR), Via De Marini 6, 16149 Genoa, Italy
14 shared publications - Artur Kudyba
Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), Alfred Getz Vei 2, 7034 Trondheim, Norway
13 shared publications - Paweł Jóźwik
Faculty of Advanced Technologies and Chemistry, Institute of Materials Science and Engineering, Military University of Technology, Kaliskiego 2 Str., 00-908 Warsaw, Poland
12 shared publications - Zbigniew Bojar
Faculty of Advanced Technologies and Chemistry, Military University of Technology, Sylwestra Kaliskiego 2, 00-908 Warsaw, Poland
12 shared publications - Adelajda Polkowska
Foundry Research Institute
11 shared publications
Latest Publications
- 6 October 2026
- Published by Springer Nature
- p. 541-561
Complex Concentrated Silicides Coatings for Refractory Alloys: Synthesis, Characterization and Performance
- 6 October 2026
- Published by Springer Nature
- p. 541-561
Complex Concentrated Silicides Coatings for Refractory Alloys: Synthesis, Characterization and Performance
- 11 May 2026
- Published by Springer Nature in High Temperature Corrosion of Materials
- Vol. 103 (3) , 43
Highly Porous Hastelloy-X Nickel Superalloy Produced by a Space Holder Approach: Oxidation Behavior at 1000 °C
- 11 May 2026
- Published by Springer Nature in High Temperature Corrosion of Materials
- Vol. 103 (3) , 43
Highly Porous Hastelloy-X Nickel Superalloy Produced by a Space Holder Approach: Oxidation Behavior at 1000 °C
- Open Access
- 16 December 2025
- Published by Elsevier in Journal of Cleaner Production
- Vol. 538
Development of FeSiB phase change material via aluminothermic reduction for high-temperature thermal energy storage
- 16 December 2025
- Published by Elsevier in Journal of Cleaner Production
- Vol. 538
Open AccessDevelopment of FeSiB phase change material via aluminothermic reduction for high-temperature thermal energy storage
- Open Access
- 23 October 2025
- Published by Elsevier in Materials & Design
- Vol. 260
Designing new ultra-high temperature phase change materials from the Fe-Si-B system for thermal energy storage density above 1 MWh/m3
- 23 October 2025
- Published by Elsevier in Materials & Design
- Vol. 260
Open AccessDesigning new ultra-high temperature phase change materials from the Fe-Si-B system for thermal energy storage density above 1 MWh/m3
- Open Access
Microstructure Evolution of Ni3Al-Based Intermetallic Alloy Strips After Hot Rolling
The effect of the temperature and strain rate during the hot rolling process on the microstructural evolution in fine-grained Ni3Al intermetallic alloy doped with Zr and B was examined in this work. The hot rolling process was carried out at an initial temperature range of 1000, 1100, and 1280 °C and at a strain rate between 3.9 × 10−1 s−1 and 2.5 s−1. The results of the EBSD microstructural analyses revealed that dynamic recrystallization phenomena are initiated at the rolling temperature of 1100 °C, while a fraction of the dynamically recrystallized grains further increases with both the rising temperature and strain rate of the deformation process. Furthermore, to estimate the heat losses during the hot rolling processing, a non-stationary heat transfer model was formulated and then used to evaluate the experimentally received data.
Open AccessMicrostructure Evolution of Ni3Al-Based Intermetallic Alloy Strips After Hot Rolling
The effect of the temperature and strain rate during the hot rolling process on the microstructural evolution in fine-grained Ni3Al intermetallic alloy doped with Zr and B was examined in this work. The hot rolling process was carried out at an initial temperature range of 1000, 1100, and 1280 °C and at a strain rate between 3.9 × 10−1 s−1 and 2.5 s−1. The results of the EBSD microstructural analyses revealed that dynamic recrystallization phenomena are initiated at the rolling temperature of 1100 °C, while a fraction of the dynamically recrystallized grains further increases with both the rising temperature and strain rate of the deformation process. Furthermore, to estimate the heat losses during the hot rolling processing, a non-stationary heat transfer model was formulated and then used to evaluate the experimentally received data.
- Open Access
- 28 May 2025
- Published by MDPI AG in Preprints.org
Microstructure Evolution of Ni3Al-Based Intermetallic Alloy Strips After Hot Rolling
An effect of temperature and strain rate during the hot rolling process on microstructural evolution in fine-grained Ni3Al intermetallic alloy doped with Zr and B was examined in this work. The hot rolling process was carried out at initial temperature range of 1000, 1100 and 1280C and at the strain rate between 3.9x101 s1 and 2.5 s1. The results of EBSD microstructural analyses revealed that dynamic recrystallization phenomena are initiated at the rolling temperature of 1100C, while a fraction of dynamically recrystallized grains further increases with both rising temperature and strain rate of the deformation process. Furthermore, to estimate heat losses during the hot rolling processing, a non-stationary heat transfer model was formulated and then used to evaluate experimentally received data.
- 28 May 2025
- Published by MDPI AG in Preprints.org
Open AccessMicrostructure Evolution of Ni3Al-Based Intermetallic Alloy Strips After Hot Rolling
An effect of temperature and strain rate during the hot rolling process on microstructural evolution in fine-grained Ni3Al intermetallic alloy doped with Zr and B was examined in this work. The hot rolling process was carried out at initial temperature range of 1000, 1100 and 1280C and at the strain rate between 3.9x101 s1 and 2.5 s1. The results of EBSD microstructural analyses revealed that dynamic recrystallization phenomena are initiated at the rolling temperature of 1100C, while a fraction of dynamically recrystallized grains further increases with both rising temperature and strain rate of the deformation process. Furthermore, to estimate heat losses during the hot rolling processing, a non-stationary heat transfer model was formulated and then used to evaluate experimentally received data.
- Open Access
- 28 January 2025
- Published by Elsevier in Results in Engineering
- Vol. 25
Micro-encapsulation of Si-Fe ultra-high temperature phase change material: Fabrication and basic energy storage properties
- 28 January 2025
- Published by Elsevier in Results in Engineering
- Vol. 25
Open AccessMicro-encapsulation of Si-Fe ultra-high temperature phase change material: Fabrication and basic energy storage properties
- Open Access
Titanium Oxide Formation in TiCoCrFeMn High-Entropy Alloys
High-entropy materials, characterized by complex chemical compositions, are difficult to identify and describe structurally. These problems are encountered at the composition design stage when choosing an effective method for predicting the final phase structure of the alloy, which affects its functional properties. In this work, the effects of introducing oxide precipitates into the matrix of a high-entropy TiCoCrFeMn alloy to strengthen ceramic particles were studied. The particles were introduced by the ex situ method, such as TiO2 in the form of anatase, and by the in situ method, consisting of the reconstruction of CuO into TiO2. In both cases, it was assumed that after the homogenization process, carried out at 1000 °C, ceramic precipitates in the rutile phase, commonly considered a stable allotropic form of TiO2, would be obtained. However, the microscopic observations and XRD analyses, supported by EDS chemical composition microanalysis and EBSD backscattered electron diffraction, clearly revealed that, regardless of the method of introducing oxides, the final strengthening phase obtained was a mixture of TiO2 in the form of anatase with the Magnelli phase of Ti2O3. In this work, phase reconstruction in the Ti-O system was analyzed using changes in the Gibbs free energy of the identified oxide phases.
Open AccessTitanium Oxide Formation in TiCoCrFeMn High-Entropy Alloys
High-entropy materials, characterized by complex chemical compositions, are difficult to identify and describe structurally. These problems are encountered at the composition design stage when choosing an effective method for predicting the final phase structure of the alloy, which affects its functional properties. In this work, the effects of introducing oxide precipitates into the matrix of a high-entropy TiCoCrFeMn alloy to strengthen ceramic particles were studied. The particles were introduced by the ex situ method, such as TiO2 in the form of anatase, and by the in situ method, consisting of the reconstruction of CuO into TiO2. In both cases, it was assumed that after the homogenization process, carried out at 1000 °C, ceramic precipitates in the rutile phase, commonly considered a stable allotropic form of TiO2, would be obtained. However, the microscopic observations and XRD analyses, supported by EDS chemical composition microanalysis and EBSD backscattered electron diffraction, clearly revealed that, regardless of the method of introducing oxides, the final strengthening phase obtained was a mixture of TiO2 in the form of anatase with the Magnelli phase of Ti2O3. In this work, phase reconstruction in the Ti-O system was analyzed using changes in the Gibbs free energy of the identified oxide phases.
- Open Access
- 2 January 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-13
Microstructure and mechanical properties of highly porous Hastelloy-X nickel superalloy produced by a space holder approach
Highly porous nickel-based superalloys appear as attractive candidates to be applied e.g. as seals in gas turbine engines instead of honeycomb structures. Among various methods of producing open-porous materials, a space holder approach provides number of benefits regarding economic and ecological aspects of production. In this work, the pioneering results of microstructure and mechanical properties analyses of highly porous Hastelloy-X nickel superalloy produced by the space holder approach, are presented. The materials were fabricated by using spherical fine Hastelloy-X powders and carbamide particles as batch materials. A multi-step powder metallurgy and thermomechanical processing was applied to produce open porous samples having a total volumetric porosity of 50, 60 and 70%. The produced materials were subjected to non-destructive (X-ray computed tomography) and metallographic inspections. Mechanical properties of the porous Hastelloy-X samples were examined in static room temperature compression tests, to discuss the effect of obtained porosity on compressive response.
- 2 January 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-13
Open AccessMicrostructure and mechanical properties of highly porous Hastelloy-X nickel superalloy produced by a space holder approach
Highly porous nickel-based superalloys appear as attractive candidates to be applied e.g. as seals in gas turbine engines instead of honeycomb structures. Among various methods of producing open-porous materials, a space holder approach provides number of benefits regarding economic and ecological aspects of production. In this work, the pioneering results of microstructure and mechanical properties analyses of highly porous Hastelloy-X nickel superalloy produced by the space holder approach, are presented. The materials were fabricated by using spherical fine Hastelloy-X powders and carbamide particles as batch materials. A multi-step powder metallurgy and thermomechanical processing was applied to produce open porous samples having a total volumetric porosity of 50, 60 and 70%. The produced materials were subjected to non-destructive (X-ray computed tomography) and metallographic inspections. Mechanical properties of the porous Hastelloy-X samples were examined in static room temperature compression tests, to discuss the effect of obtained porosity on compressive response.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1)
Effects of Chromium and Aluminum Additions on High-Entropy Alloys of the NbTiCrAl System: Development and Characterization
This study investigates the design, synthesis, and characterization of novel high-entropy alloys (HEAs) in the NbTiCrAl system, focusing on the compositions NbTi, Nb7Ti7Cr2, Nb7Ti7Al2, Nb7Ti7Cr1Al1, and Nb3Ti3Cr1Al1. Microstructural analysis identified a single-phase BCC solid solution with dendritic structure, where compositional segregation is driven by melting point differences, with Ti, Cr, and Al migrating to interdendritic regions. Mechanical testing demonstrated that Cr and Al additions significantly improved hardness and strength, with Nb3Ti3Cr1Al1 exhibiting the highest microhardness (387.9 ± 6.1 HV0.5) and compressive yield strength (986.4 ± 70.0 MPa). Statistical analysis through a 22 full-factorial + central point design and ANOVA indicated that Cr predominantly influences the mechanical properties, with minimal interaction from Al. Multivariable linear regression models were developed to predict mechanical performance. These findings underscore the importance of Cr and Al balance for phase stability and mechanical properties, establishing the NbTiCrAl system as a promising candidate for advanced structural applications.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1)
Open AccessEffects of Chromium and Aluminum Additions on High-Entropy Alloys of the NbTiCrAl System: Development and Characterization
This study investigates the design, synthesis, and characterization of novel high-entropy alloys (HEAs) in the NbTiCrAl system, focusing on the compositions NbTi, Nb7Ti7Cr2, Nb7Ti7Al2, Nb7Ti7Cr1Al1, and Nb3Ti3Cr1Al1. Microstructural analysis identified a single-phase BCC solid solution with dendritic structure, where compositional segregation is driven by melting point differences, with Ti, Cr, and Al migrating to interdendritic regions. Mechanical testing demonstrated that Cr and Al additions significantly improved hardness and strength, with Nb3Ti3Cr1Al1 exhibiting the highest microhardness (387.9 ± 6.1 HV0.5) and compressive yield strength (986.4 ± 70.0 MPa). Statistical analysis through a 22 full-factorial + central point design and ANOVA indicated that Cr predominantly influences the mechanical properties, with minimal interaction from Al. Multivariable linear regression models were developed to predict mechanical performance. These findings underscore the importance of Cr and Al balance for phase stability and mechanical properties, establishing the NbTiCrAl system as a promising candidate for advanced structural applications.