Comparing optical performance of a wide range of perovskite/silicon tandem architectures under real‐world conditions
Open Access
- 17 March 2021
- journal article
- research article
- Published by Wiley in Nanophotonics
- Vol. 10 (8) , 2043-2057
Abstract
Since single junction c‐Si solar cells are reaching their practical efficiency limit. Perovskite/c‐Si tandem solar cells hold the promise of achieving greater than 30% efficiencies. In this regard, optical simulations can deliver guidelines for reducing the parasitic absorption losses and increasing the photocurrent density of the tandem solar cells. In this work, an optical study of 2, 3 and 4 terminal perovskite/c‐Si tandem solar cells with c‐Si solar bottom cells passivated by high thermal‐budget poly‐Si, poly‐SiO x and poly‐SiC x is performed to evaluate their optical performance with respect to the conventional tandem solar cells employing silicon heterojunction bottom cells. The parasitic absorption in these carrier selective passivating contacts has been quantified. It is shown that they enable greater than 20 mA/cm 2 matched implied photocurrent density in un‐encapsulated 2T tandem architecture along with being compatible with high temperature production processes. For studying the performance of such tandem devices in real‐world irradiance conditions and for different locations of the world, the effect of solar spectrum and angle of incidence on their optical performance is studied. Passing from mono‐facial to bi‐facial tandem solar cells, the photocurrent density in the bottom cell can be increased, requiring again optical optimization. Here, we analyse the effect of albedo, perovskite thickness and band gap as well as geographical location on the optical performance of these bi‐facial perovskite/c‐Si tandem solar cells. Our optical study shows that bi‐facial 2T tandems, that also convert light incident from the rear, require radically thicker perovskite layers to match the additional current from the c‐Si bottom cell. For typical perovskite bandgap and albedo values, even doubling the perovskite thickness is not sufficient. In this respect, lower bandgap perovskites are very interesting for application not only in bi‐facial 2T tandems but also in related 3T and 4T tandems.Keywords
Funding Information
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (680‐91‐011)
This publication has 61 references indexed in Scilit:
- Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cellsSolar Energy Materials and Solar Cells, 2016
- IBC c-Si solar cells based on ion-implanted poly-silicon passivating contactsSolar Energy Materials and Solar Cells, 2016
- Long-term soiling of silicon PV modules in a moderate subtropical climateSolar Energy, 2016
- Design and application of ion-implanted polySi passivating contacts for interdigitated back contact c-Si solar cellsApplied Physics Letters, 2016
- CH_3NH_3PbI_3 perovskite / silicon tandem solar cells: characterization based optical simulationsOptics Express, 2015
- Effects of spectral albedo on solar photovoltaic devicesSolar Energy Materials and Solar Cells, 2014
- Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic PerformanceThe Journal of Physical Chemistry Letters, 2014
- Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite AbsorberScience, 2013
- Geometric light trapping for high efficiency thin film silicon solar cellsSolar Energy Materials and Solar Cells, 2012
- Detailed Balance Limit of Efficiency ofp-nJunction Solar CellsJournal of Applied Physics, 1961