Effect of Pore Former on Carbon Black–Polytetrafluoroethylene‐Based Monolithic Gas Diffusion Media for Proton Exchange Membrane Fuel Cells
- 1 May 2020
- journal article
- research article
- Published by Wiley in Energy Technology
- Vol. 8 (7)
Abstract
Herein, carbon fiber gas diffusion media are replaced by carbon black (CB) and polytetrafluoroethylene (PTFE) composite diffusion media. Uniformly thick monolithic layers are synthesized by a novel die‐cast process. They are evaluated for electrical conductivity, contact resistance, hydrophobicity, porosity, and mechanical integrity. Monolithic layers possess combined properties of a microporous layer and gas diffusion layer with a mixed tri‐modal pore structure. The monolithic layers are further improved by inducing pores with pore formers. These layers are characterized for use in proton exchange membrane fuel cells. Pore formers increase the porosity and pore volume, and their effects on performance are revealed. The effect of porous structure on catalyst utilization is assessed by cyclic voltammetry. The power density of monolithic layers is on par with standard layers, whereas the pore‐induced monolithic layers achieve 27% higher power density compared with standard layers. The synthesized composite gas diffusion media are significantly insensitive to changes in humidity and represent an excellent alternative for use in fuel cells.Keywords
This publication has 55 references indexed in Scilit:
- A review of gas diffusion layer in PEM fuel cells: Materials and designsInternational Journal of Hydrogen Energy, 2012
- On the through-plane permeability of microporous layer-coated gas diffusion layers used in proton exchange membrane fuel cellsInternational Journal of Hydrogen Energy, 2011
- Ionomer content in the catalyst layer of polymer electrolyte membrane fuel cell (PEMFC): Effects on diffusion and performanceInternational Journal of Hydrogen Energy, 2011
- Effect of driving cycle on the performance of PEM fuel cell and microstructure of membrane electrode assemblyInternational Journal of Hydrogen Energy, 2010
- Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFCEnergy Conversion and Management, 2010
- The effect of micro-porous layers on the performance of proton exchange membrane fuel cellsProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2010
- Measurement of through-plane effective thermal conductivity and contact resistance in PEM fuel cell diffusion mediaElectrochimica Acta, 2010
- Microporous layer for water morphology control in PEMFCInternational Journal of Heat and Mass Transfer, 2009
- On the thermal stability of some ammonium saltsThermochimica Acta, 2001
- Cold rolling of polymers. 1 Influence of rolling on properties of amorphous polymerPolymer Engineering & Science, 1971