Comparison of Laboratory and Field Asphalt Aging for Polymer-Modified and Warm-Mix Asphalt Binders
- 1 July 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (7)
Abstract
The laboratory aging tests for binders were developed based on Strategic Highway Research Program (SHRP) tests in the 1990s (i.e., performance grading); the applicability of performance grade (PG) to recently developed tests, such as multiple stress creep recovery (MSCR), is not clear. In addition, the ability of laboratory aging to represent field pavement aging, especially when polymer-modified asphalt (PMA) and warm-mix asphalt (WMA) binders are used, has been a concern to paving practice. This paper investigates quantitatively the level of laboratory aging compared to the field aging for both the control hot-mix asphalt (HMA) binders and WMA and PMA binders. The study focuses on a number of binder parameters, as well as evaluating whether the current laboratory aging conditions (loose-mix oven aging) will provide correlation to field short-term aging. HMA and WMA binders from four field projects that covered different climatic zones, pavement structures, and materials were selected. Binder properties including high-temperature PG, MSCR nonrecoverable creep compliance, low-temperature binder PG, and fracture energy were used for analysis. The results show that the laboratory rolling thin-film oven (RTFO) aging method is not sufficient to simulate field short-term aging conditions for most cases except for the low-temperature PG test. The aging of asphalt binder is parameter sensitive; depending on the parameters used, the comparison results between laboratory aging and field aging could be different. The effect of aging on PMA binder, especially when mixed with Sasobit additive, differs from non-polymer-modified binders. Limited results from non-polymer-modified binder mixes suggested that loose-mix oven aging at 85°C for 2, 5, and 7 days appears to provide a reasonable simulation of field pavement aging right after compaction (0 years), 1.8 years, and 3 years.Keywords
This publication has 13 references indexed in Scilit:
- Effect of Aging on Foamed Warm Mix Asphalt Produced by Water InjectionJournal of Materials in Civil Engineering, 2016
- Field performance of top-down fatigue cracking for warm mix asphalt pavementsInternational Journal of Pavement Engineering, 2016
- Rheological Examination of Aging in Polymer-Modified AsphaltJournal of Materials in Civil Engineering, 2016
- Modifying laboratory mixture design to improve field compactionRoad Materials and Pavement Design, 2015
- Aging Influence on Rheology Properties of Petroleum-Based Asphalt Modified with BiobinderJournal of Materials in Civil Engineering, 2014
- Quantification of Oxidative Aging of Polymer-Modified Asphalt Mixes Made with Warm Mix TechnologiesJournal of Materials in Civil Engineering, 2013
- Methodologies for Estimating Effective Performance Grade of Asphalt Binders in Mixtures with High Recycled Asphalt Pavement ContentTransportation Research Record: Journal of the Transportation Research Board, 2012
- Practical Use of Multiple Stress Creep and Recovery TestTransportation Research Record: Journal of the Transportation Research Board, 2009
- Development of a Stirred Airflow Test Procedure for Short-Term Aging of Asphaltic MaterialsTransportation Research Record: Journal of the Transportation Research Board, 2002
- Laboratory Aging Methods for Simulation of Field Aging of AsphaltsJournal of Materials in Civil Engineering, 1996