A 3-D-Printed Dual-Band Waveguide-Fed Hexagonal Cavity Slot Array for mmWave Applications
- 4 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5455-5467
Abstract
This paper introduces a dual-band slot array antenna based on a hexagonal cavity design for millimeter-wave (mmWave) communication systems. The proposed antenna array is manufactured using direct metal laser sintering (DMLS) 3D printing and electroless plating, enabling the fabrication of a compact and high-performance structure. To ensure stable dual-band operation with wide impedance bandwidth and high gain, the design incorporates a hexagonal cavity and a polarizer structure. The TM010 and TM110 modes of the cavity are analyzed for in-phase radiation across all radiating elements, while the polarizer corrects the tilted E-field to enhance radiation. A stepped waveguide feeding network is employed to achieve compact element spacing, supporting high integration density without performance degradation. Experimental results for an 8×8 antenna array prototype demonstrate stable dual-band operation over the n257 and n260 bands, achieving impedance bandwidths of 10.7% and 9.6%, and gains of 24.5 dBi and 25.2 dBi for the respective bands, with low cross-polarization levels of approximately −30 dB.Keywords
Funding Information
- Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (RS-2023-00237172)
This publication has 33 references indexed in Scilit:
- Metallization of polymers and composites: State-of-the-art approachesMaterials & Design, 2022
- Development of a wideband hexagonal SIW cavity-backed slot antenna arrayAEU - International Journal of Electronics and Communications, 2021
- Patch Antenna Loaded With Paired Shorting Pins and H-Shaped Slot for 28/38 GHz Dual-Band MIMO ApplicationsIEEE Access, 2020
- Application of Direct Metal Laser Sintering to Waveguide-Based Passive Microwave Components, Antennas, and Antenna ArraysProceedings of the IEEE, 2016
- Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a reviewJournal of Materials Science, 2016
- Fabrication of a High-Efficiency Waveguide Antenna Array via Direct Metal Laser SinteringIEEE Antennas and Wireless Propagation Letters, 2015
- Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!IEEE Access, 2013
- ABS Polymer Electroless Plating through a One-Step Poly(acrylic acid) Covalent GraftingACS Applied Materials & Interfaces, 2010
- A study of microstrip array antennas with the feed networkIEEE Transactions on Antennas and Propagation, 1989
- Waveguide Handbook1986