Nohgyeom Ha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nohgyeom Ha has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Sangkil Kim
Pusan National University
15 shared publications - Gyoungdeuk Kim
Korea Aerospace Research Institute (KARI), Daejeon, South Korea
9 shared publications - Byeongjin Park
Composites Research Division, Korea Institute of Materials Science, Changwon, Republic of Korea
5 shared publications - Hoyong Kim
Department of Electronics Engineering, Pusan National University, Busan, South Korea
4 shared publications Sukjin Kwon
4 shared publications- Hyunmin Jeong
Samsung System LSI
3 shared publications
Latest Publications
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. PP (16) , 1
Multi-Functional Metasurfaces with M-Type Ferrites: Shaping the Future of mmWave Absorption and Beam Steering
This paper presents a comprehensive review/tutorial on multi-functional metasurfaces integrated with M-type ferrite materials for millimeter-wave (mmWave) absorption and beam control. As wireless communication systems transition toward beyond-5G architectures, including non-terrestrial networks (NTNs), the demand for adaptive, low-profile electromagnetic surfaces that can manage interference while enabling beam reconfiguration becomes increasingly critical. Conventional metasurfaces often struggle to simultaneously achieve high absorption and beamforming over wide frequency ranges due to intrinsic material and structural limitations. This paper reviews the state-of-the-art in metasurface design for dual-functionality— particularly those combining frequency-selective magnetic materials with periodic surface lattices—to enable passive, compact, and reconfigurable reflectors and absorbers. Special emphasis is placed on the role of M-type ferrites in enhancing absorption via ferromagnetic resonance (FMR), and on the use of surface-wave trapping mechanisms to achieve narrowband and broadband functionality. A case study of a ferrite-based hybrid “reflectsorber” (reflectrarray + absorber) is presented to demonstrate key design concepts, analytical models, and application scenarios relevant to satellite, UAV, and NTN ground station deployments. Future directions for low-loss, tunable, and scalable metasurfaces in next-generation wireless infrastructures are also discussed.
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. PP (16) , 1
Multi-Functional Metasurfaces with M-Type Ferrites: Shaping the Future of mmWave Absorption and Beam Steering
This paper presents a comprehensive review/tutorial on multi-functional metasurfaces integrated with M-type ferrite materials for millimeter-wave (mmWave) absorption and beam control. As wireless communication systems transition toward beyond-5G architectures, including non-terrestrial networks (NTNs), the demand for adaptive, low-profile electromagnetic surfaces that can manage interference while enabling beam reconfiguration becomes increasingly critical. Conventional metasurfaces often struggle to simultaneously achieve high absorption and beamforming over wide frequency ranges due to intrinsic material and structural limitations. This paper reviews the state-of-the-art in metasurface design for dual-functionality— particularly those combining frequency-selective magnetic materials with periodic surface lattices—to enable passive, compact, and reconfigurable reflectors and absorbers. Special emphasis is placed on the role of M-type ferrites in enhancing absorption via ferromagnetic resonance (FMR), and on the use of surface-wave trapping mechanisms to achieve narrowband and broadband functionality. A case study of a ferrite-based hybrid “reflectsorber” (reflectrarray + absorber) is presented to demonstrate key design concepts, analytical models, and application scenarios relevant to satellite, UAV, and NTN ground station deployments. Future directions for low-loss, tunable, and scalable metasurfaces in next-generation wireless infrastructures are also discussed.
- Open Access
- 30 April 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 36 (4) , 362-373
Design of a 24 GHz Band Rasorber with High Frequency Selectivity and Broadband Absorption Performance
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 30 April 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 36 (4) , 362-373
Open AccessDesign of a 24 GHz Band Rasorber with High Frequency Selectivity and Broadband Absorption Performance
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 17 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5154-5165
Theoretical Analysis and Design of Metasurface Antennas for Wide Beamwidth and Dual Circularly Polarized High Gain
This paper presents an in-depth study on the design and analysis of metasurface (MTS) antennas optimized for high gain and wide beamwidth performance in X-band applications. The proposed MTS antennas are comprehensively analyzed using impedance layer models with Sommerfeld-type integrals and image theory. The proposed MTS can function as a Perfect Magnetic Conductor (PMC), Perfect Electrical Conductor (PEC), or Reactive Impedance Surface (RIS) depending on the conditions. In high gain configurations, the MTS antenna is 26.5×26.5×2.52mm3 and achieves a peak boresight gain of 10.1 dBi at 9 GHz under PMC, with boresight gain reduction observed at 11 GHz as it transitions towards PEC. The -10 dB impedance bandwidth exceeds 25%, covering the 6.7 ~ 8.7 GHz range. For wide beamwidth applications, the antenna is 16.5×16.5×3.04mm3 and incorporates a RIS to mitigate ground plane effects, resulting in a 3-dB beamwidth of 140° (H-plane) and 104° (E-plane). Additionally, a dual circular polarization (CP) MTS antenna is proposed, utilizing a cascaded hybrid coupler to achieve a maximum gain of 14 dBic at 8.35 GHz in a 2×2 array configuration, while maintaining an axial ratio (AR) below 1.5 dB across the specified X-band frequencies.
- 17 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5154-5165
Theoretical Analysis and Design of Metasurface Antennas for Wide Beamwidth and Dual Circularly Polarized High Gain
This paper presents an in-depth study on the design and analysis of metasurface (MTS) antennas optimized for high gain and wide beamwidth performance in X-band applications. The proposed MTS antennas are comprehensively analyzed using impedance layer models with Sommerfeld-type integrals and image theory. The proposed MTS can function as a Perfect Magnetic Conductor (PMC), Perfect Electrical Conductor (PEC), or Reactive Impedance Surface (RIS) depending on the conditions. In high gain configurations, the MTS antenna is 26.5×26.5×2.52mm3 and achieves a peak boresight gain of 10.1 dBi at 9 GHz under PMC, with boresight gain reduction observed at 11 GHz as it transitions towards PEC. The -10 dB impedance bandwidth exceeds 25%, covering the 6.7 ~ 8.7 GHz range. For wide beamwidth applications, the antenna is 16.5×16.5×3.04mm3 and incorporates a RIS to mitigate ground plane effects, resulting in a 3-dB beamwidth of 140° (H-plane) and 104° (E-plane). Additionally, a dual circular polarization (CP) MTS antenna is proposed, utilizing a cascaded hybrid coupler to achieve a maximum gain of 14 dBic at 8.35 GHz in a 2×2 array configuration, while maintaining an axial ratio (AR) below 1.5 dB across the specified X-band frequencies.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5455-5467
A 3-D-Printed Dual-Band Waveguide-Fed Hexagonal Cavity Slot Array for mmWave Applications
This paper introduces a dual-band slot array antenna based on a hexagonal cavity design for millimeter-wave (mmWave) communication systems. The proposed antenna array is manufactured using direct metal laser sintering (DMLS) 3D printing and electroless plating, enabling the fabrication of a compact and high-performance structure. To ensure stable dual-band operation with wide impedance bandwidth and high gain, the design incorporates a hexagonal cavity and a polarizer structure. The TM010 and TM110 modes of the cavity are analyzed for in-phase radiation across all radiating elements, while the polarizer corrects the tilted E-field to enhance radiation. A stepped waveguide feeding network is employed to achieve compact element spacing, supporting high integration density without performance degradation. Experimental results for an 8×8 antenna array prototype demonstrate stable dual-band operation over the n257 and n260 bands, achieving impedance bandwidths of 10.7% and 9.6%, and gains of 24.5 dBi and 25.2 dBi for the respective bands, with low cross-polarization levels of approximately −30 dB.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5455-5467
A 3-D-Printed Dual-Band Waveguide-Fed Hexagonal Cavity Slot Array for mmWave Applications
This paper introduces a dual-band slot array antenna based on a hexagonal cavity design for millimeter-wave (mmWave) communication systems. The proposed antenna array is manufactured using direct metal laser sintering (DMLS) 3D printing and electroless plating, enabling the fabrication of a compact and high-performance structure. To ensure stable dual-band operation with wide impedance bandwidth and high gain, the design incorporates a hexagonal cavity and a polarizer structure. The TM010 and TM110 modes of the cavity are analyzed for in-phase radiation across all radiating elements, while the polarizer corrects the tilted E-field to enhance radiation. A stepped waveguide feeding network is employed to achieve compact element spacing, supporting high integration density without performance degradation. Experimental results for an 8×8 antenna array prototype demonstrate stable dual-band operation over the n257 and n260 bands, achieving impedance bandwidths of 10.7% and 9.6%, and gains of 24.5 dBi and 25.2 dBi for the respective bands, with low cross-polarization levels of approximately −30 dB.
- Open Access
- 1 January 2025
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2025 (1)
Design of a Magnetic Composite–Based Ultrawideband Absorber Using a Reactance Compensation Strategy for Ku‐/Ka‐Band Applications
This paper proposes an ultrawideband electromagnetic (EM) absorber that overcomes the bandwidth limitations imposed by Snoek’s limit in conventional magnetic materials. Traditional absorbers suffer from poor absorption efficiency beyond the Ku‐band due to the limited permeability–bandwidth product. To address this, a custom‐fabricated CIP/epoxy‐based magnetic substrate is introduced, offering enhanced magnetic response. A thermoplastic polyurethane (TPU) layer and a resistor‐loaded frequency‐selective surface (FSS) are incorporated to implement admittance compensation, enabling broadband impedance matching. As a result, the proposed absorber achieves over 90% absorption from 12 to 49.8 GHz (122% fractional bandwidth) at a thickness of 1.8 mm (0.18 λ 0 ), maintaining stable performance under oblique TE and TM wave incidence. This design demonstrates near‐optimal absorption performance approaching the Rozanov limit and is well‐suited for millimeter‐wave applications.
- 1 January 2025
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2025 (1)
Open AccessDesign of a Magnetic Composite–Based Ultrawideband Absorber Using a Reactance Compensation Strategy for Ku‐/Ka‐Band Applications
This paper proposes an ultrawideband electromagnetic (EM) absorber that overcomes the bandwidth limitations imposed by Snoek’s limit in conventional magnetic materials. Traditional absorbers suffer from poor absorption efficiency beyond the Ku‐band due to the limited permeability–bandwidth product. To address this, a custom‐fabricated CIP/epoxy‐based magnetic substrate is introduced, offering enhanced magnetic response. A thermoplastic polyurethane (TPU) layer and a resistor‐loaded frequency‐selective surface (FSS) are incorporated to implement admittance compensation, enabling broadband impedance matching. As a result, the proposed absorber achieves over 90% absorption from 12 to 49.8 GHz (122% fractional bandwidth) at a thickness of 1.8 mm (0.18 λ 0 ), maintaining stable performance under oblique TE and TM wave incidence. This design demonstrates near‐optimal absorption performance approaching the Rozanov limit and is well‐suited for millimeter‐wave applications.
- Open Access
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (2) , 372-382
Compact Dual-Band, Dual-Circular Polarized Microstrip Antenna Array for K/Ka-Band Application
A novel dual-band and dual-circularly polarized microstrip antenna design for a small AAV or a low earth orbit (LEO) satellite applications at K/Ka-band is proposed in this paper. Utilizing arrow-shaped and T-shaped stubs, the proposed design ensures right-hand and left-hand circular polarization across two frequency bands. The design activates orthogonal modes (TM10/TM01 and TM30/TM21) simultaneously, leveraging arrow-shaped and T-shaped stubs to finely tune resonant frequencies. The dimensions of these stubs facilitate independent adjustment of each operational band, ensuring optimized antenna functionality across different frequencies. Verification through a $2\times 2$ antenna array design at 18.6 GHz and 30.9 GHz demonstrates the proposed design concept, achieving impedance bandwidths of 11.0% and 4.8%, axial ratio bandwidths of 3.7% and 2.3%, and realized gains of 9.45 dBic at 18.6 GHz and 10.78 dBic at 30.9 GHz, affirming its potential for advanced communication applications.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (2) , 372-382
Open AccessCompact Dual-Band, Dual-Circular Polarized Microstrip Antenna Array for K/Ka-Band Application
A novel dual-band and dual-circularly polarized microstrip antenna design for a small AAV or a low earth orbit (LEO) satellite applications at K/Ka-band is proposed in this paper. Utilizing arrow-shaped and T-shaped stubs, the proposed design ensures right-hand and left-hand circular polarization across two frequency bands. The design activates orthogonal modes (TM10/TM01 and TM30/TM21) simultaneously, leveraging arrow-shaped and T-shaped stubs to finely tune resonant frequencies. The dimensions of these stubs facilitate independent adjustment of each operational band, ensuring optimized antenna functionality across different frequencies. Verification through a $2\times 2$ antenna array design at 18.6 GHz and 30.9 GHz demonstrates the proposed design concept, achieving impedance bandwidths of 11.0% and 4.8%, axial ratio bandwidths of 3.7% and 2.3%, and realized gains of 9.45 dBic at 18.6 GHz and 10.78 dBic at 30.9 GHz, affirming its potential for advanced communication applications.
- Open Access
- 25 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (1) , 88-97
Design and Analysis of a Carbonyl Iron Powder/Epoxy Composite-Based Ultra-Wideband Multi-Pyramidal Magnetic Absorber Using an Equivalent Circuit Model
This paper presents a CIP/epoxy composite based ultra-wide band electromagnetic multi-pyramidal absorber. The constituent parameters of the CIP/epoxy composite is experimentally extracted using a waveguide measurement setup. This raw data is then quantified using a least-square fit polynomial based curve fitting technique to facilitate its use in the design and the analysis of the pyramidal absorber. Four asymmetrical truncated pyramids supported by a grounded base constitute the absorber unit cell. The absorption bandwidth of the design ranges from 3.21 GHz to 40 GHz (FBW of 170.3 %, S -band to V -band) and stable absorption characteristics under oblique incidences is observed up to 35. To enhance the understanding of its operational principles, an equivalent circuit model (ECM) based on planar multi-layer structure incorporating both synthetic capacitance and inductance models is proposed. Validation of the proposed absorber is done by measuring the performance of its prototype.
- 25 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (1) , 88-97
Open AccessDesign and Analysis of a Carbonyl Iron Powder/Epoxy Composite-Based Ultra-Wideband Multi-Pyramidal Magnetic Absorber Using an Equivalent Circuit Model
This paper presents a CIP/epoxy composite based ultra-wide band electromagnetic multi-pyramidal absorber. The constituent parameters of the CIP/epoxy composite is experimentally extracted using a waveguide measurement setup. This raw data is then quantified using a least-square fit polynomial based curve fitting technique to facilitate its use in the design and the analysis of the pyramidal absorber. Four asymmetrical truncated pyramids supported by a grounded base constitute the absorber unit cell. The absorption bandwidth of the design ranges from 3.21 GHz to 40 GHz (FBW of 170.3 %, S -band to V -band) and stable absorption characteristics under oblique incidences is observed up to 35. To enhance the understanding of its operational principles, an equivalent circuit model (ECM) based on planar multi-layer structure incorporating both synthetic capacitance and inductance models is proposed. Validation of the proposed absorber is done by measuring the performance of its prototype.
- Open Access
- 30 April 2024
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 35 (4) , 287-294
Design of a High-Gain Patch Antenna Integrated with a 3D Printed Inverted Pyramidal GRIN Lens for mmWave Communications
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 30 April 2024
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 35 (4) , 287-294
Open AccessDesign of a High-Gain Patch Antenna Integrated with a 3D Printed Inverted Pyramidal GRIN Lens for mmWave Communications
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)