Removing the Intrinsic NiO Phase and Residual Lithium for High-Performance Nickel-Rich Materials
Authors:
- 10 January 2023
- journal article
- research article
- Published by American Association for the Advancement of Science (AAAS) in Energy Material Advances
- Vol. 4
Abstract
Layered Ni-rich materials for lithium-ion batteries exhibit high discharge capacities but degraded cyclability at the same time. The limited cycling stability originates from many aspects. One of the critical factors is the intrinsic insulating residual lithium compounds and the rock-salt (NiO) phase on the surface of particles. In this work, LiNi 0.8 Co 0.1 Mn 0.1 O 2 material is etched with a trace amount of boric acid and used as a model to demonstrate the influences of weak acid treatment on the surface phase regulations. After the etching process, the pH of the material is reduced from 12.08 to 11.82, along with a lower cation mixing degree and promoting electrochemical performances. Corresponding measurements demonstrate that weak acids such as H 3 BO 3 can also etch the NiO phase on the surface to adjust the surface of the particles to a pure layered structure. This process improves the lithium-ion diffusion and electron transport in the interface between material and electrolyte, consequently leading to better cycling performance and rate capability. This study provides a novel strategy and comprehensive understanding of acid modification and surface phase regulation process of Ni-rich cathode materials for lithium-ion batteries.Keywords
This publication has 64 references indexed in Scilit:
- High-Performance Anode Materials for Rechargeable Lithium-Ion BatteriesElectrochemical Energy Reviews, 2018
- Exposing the {010} Planes by Oriented Self-Assembly with Nanosheets To Improve the Electrochemical Performances of Ni-Rich Li[Ni0.8Co0.1Mn0.1]O2 MicrospheresACS Applied Materials & Interfaces, 2018
- Mn versus Al in Layered Oxide Cathodes in Lithium‐Ion Batteries: A Comprehensive Evaluation on Long‐Term CyclabilityAdvanced Energy Materials, 2018
- Revealing Anisotropic Spinel Formation on Pristine Li‐ and Mn‐Rich Layered Oxide Surface and Its Impact on Cathode PerformanceAdvanced Energy Materials, 2017
- Effect of Ni2+ Content on Lithium/Nickel Disorder for Ni-Rich Cathode MaterialsACS Applied Materials & Interfaces, 2015
- Profiling the nanoscale gradient in stoichiometric layered cathode particles for lithium-ion batteriesEnergy & Environmental Science, 2014
- Distinct charge dynamics in battery electrodes revealed by in situ and operando soft X-ray spectroscopyNature Communications, 2013
- Washing effects on electrochemical performance and storage characteristics of LiNi0.8Co0.1Mn0.1O2 as cathode material for lithium-ion batteriesJournal of Power Sources, 2013
- Washing Effect of a LiNi[sub 0.83]Co[sub 0.15]Al[sub 0.02]O[sub 2] Cathode in WaterElectrochemical and Solid-State Letters, 2006
- Origin of Deterioration for LiNiO[sub 2] Cathode Material during Storage in AirElectrochemical and Solid-State Letters, 2004