Optimization of X-ray Tube Voltage to Improve the Precision of Two Phase Flow Meters Used in Petroleum Industry
Authors:
- Abdullah K. AlanaziAAAbdullah K. Alanazi
- Seyed Mehdi AlizadehSASeyed Mehdi Alizadeh
- Karina Shamilyevna NurgalievaKNKarina Shamilyevna Nurgalieva
- John William Grimaldo GuerreroJGJohn William Grimaldo Guerrero
- Hala M. Abo-DiefHAHala M. Abo-Dief
- Ehsan Eftekhari-ZadehEEEhsan Eftekhari-Zadeh
- Ehsan NazemiEhsan Nazemi
- Igor M. NarozhnyyINIgor M. Narozhnyy
Open Access
- 9 December 2021
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 13 (24) , 13622
Abstract
To the best knowledge of the authors, in all the former studies, a fixed value of X-ray tube voltage has been used for investigating gas–liquid two-phase flow characteristics, while the energy of emitted X-ray radiations that depends on the tube voltage can significantly affect the measurement precision of the system. The purpose of present study is to find the optimum tube voltage to increase the accuracy and efficiency of an intelligent X-ray radiation-based two-phase flow meter. The detection system consists of an industrial X-ray tube and one detector located on either side of a steel pipe. Tube voltages in the range of 125–300 kV with a step of 25 kV were investigated. For each tube voltage, different gas volume percentages (GVPs) in the range of 10–90% with a step of 5% were modeled. A feature extraction method was performed on the output signals of the detector in every case, and the obtained matrixes were applied to the designed radial basis function neural networks (RBFNNs). The desired output of the networks was GVP. The precision of the networks in every voltage and every number of neurons in the hidden layer were obtained. The results showed that 225 kV tube voltage is the optimum voltage for this purpose. The obtained mean absolute error (MAE) for this case is less than 0.05, which demonstrates the very high precision of the metering system with an optimum X-ray tube voltage.Keywords
Funding Information
- German Research Foundation and the Open Access Publication Fund of the Thueringer Universitaets- und Landesbibliothek Jena (433052568)
- Taif University, Taif, Saudi Arabi (TURSP-2020/266)
- RUDN University Strategic Academic Leadership Program (FSRW-2020-0014)
This publication has 76 references indexed in Scilit:
- Flow regime identification and void fraction prediction in two-phase flows based on gamma ray attenuationMeasurement, 2015
- Precise volume fraction prediction in oil–water–gas multiphase flows by means of gamma-ray attenuation and artificial neural networks using one detectorMeasurement, 2014
- Radioisotope investigations of compound two-phase flows in an open channelFlow Measurement and Instrumentation, 2014
- Time-resolved two-dimensional X-ray densitometry of a two-phase flow downstream of a ventilated cavityExperiments in Fluids, 2013
- A Review of X-Ray Flow Visualization With Applications to Multiphase FlowsJournal of Fluids Engineering, 2011
- Ultra fast electron beam X-ray computed tomography for two-phase flow measurementNuclear Engineering and Design, 2010
- Flow regime identification and volume fraction prediction in multiphase flows by means of gamma-ray attenuation and artificial neural networksProgress in Nuclear Energy, 2010
- Flow characteristics of gas–liquid two-phase flow in plate heat exchangerExperimental Thermal and Fluid Science, 2004
- Cross-sectional void fraction distribution measurements in a vertical annulus two-phase flow by high speed X-ray computed tomography and real-time neutron radiography techniquesFlow Measurement and Instrumentation, 1999
- The interrelation between void fraction fluctuations and flow patterns in two-phase flowInternational Journal of Multiphase Flow, 1975