Study of the Impact on the Spray Shape Stability and the Combustion Process of Supply Pressure Fluctuations in CR-Diesel Injectors
Authors:
- 8 March 2004
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The paper presents a study of the influence of fuel pressure supply fluctuations on the upstream side of the fuel injector atomizer. The study is performed over a wide range of pressures (70 to 130 Mpa) with two different common-rail (CR) high-pressure fuel injectors. The common atomizer is a VCO-type equipped with conically shaped atomizer bores. With the injector tip (nozzle) mounted in a counter-pressure vessel the pressure fluctuations in the fuel-rail and in the injector body are recorded simultaneously with stroboscopic Schlieren-visualization of the time-resolved spray behavior. It is demonstrated that not only the instantaneous mass flow is affected. As a function of rail-pressure, pulse-width and injection strategy the pressure fluctuations change the spray hard-core structure and its break-up behavior. In order to quantify the impact on the combustion process the spray behavior visualizations in the pressure vessel are completed with analytical considerations of the spatial and temporal spray behavior obtained by the use of the 3D-numerical simulation code NCF-3D. The predicted combustion data for the different injectors are correlated to measured data from a 1.3-liter turbo-charged passenger car diesel engine.Keywords
This publication has 11 references indexed in Scilit:
- Study of the Impact on the Combustion Process of Injector Nozzle Layout creating Enhanced Secondary Spray Break-up2003
- Study of the Impact of Variations in the Diesel-Nozzle Geometry Parameters on the Layout of Multiple Injection StrategySAE International Journal of Advances and Current Practices in Mobility, 2002
- A Deforming Droplet Model for Fuel Spray in Direct-Injection Gasoline EnginesSAE International Journal of Advances and Current Practices in Mobility, 2001
- Atomization of High-Pressure Diesel Spray: Experimental Validation of a New Breakup ModelSAE International Journal of Advances and Current Practices in Mobility, 2001
- Numerical Analysis of Passenger Car HSDI Diesel Engines with the 2nd Generation of Common Rail Injection Systems: The Effect of Multiple Injections on EmissionsSAE International Journal of Advances and Current Practices in Mobility, 2001
- Developments in the Use of Multi-Purpose Numerical Simulation Tools to Optimize Combustion Control Parameters for the 2nd Generation of Lean Burn Stratified GDI EnginesSAE International Journal of Advances and Current Practices in Mobility, 2001
- Enhanced Mixture Preparation Approach for Lean Stratified SI-Combustion by a Combined Use of GDI and Electronically Controlled Valve-Timing2000
- Nonlinear Spheroidal Oscillating Model of a Single Droplet with Aerodynamic Force.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 2000
- Investigation of Cavitation in a Vertical Multi-Hole InjectorSAE International Journal of Advances and Current Practices in Mobility, 1999
- The aerodynamic instability and disintegration of viscous liquid sheetsChemical Engineering Science, 1963