Characterization and densification of hot pressed ZrCN-$ \mathrm{ZrO_2} $ ceramics
Open Access
- 1 January 2025
- journal article
- Published by National Library of Serbia in Science of Sintering
- Vol. 57 (4) , 469-483
Abstract
\mathrm{ZrCN-ZrO_2} ceramics were produced by hot pressing at a temperature of 2273 K, a pressure of 30 MPa, and a holding time at a given temperature of 15 minutes. Sintering was carried out in a vacuum environment. High-density \mathrm{ZrCN-ZrO_2} ceramics were manufactured using zirconium nitride and carbide powders. Zirconium dioxide acted as a sintering additive due to its lowest melting point among the studied compounds. Using scanning electron microscopy and X-ray phase analysis, the presence of zirconium carbonitride as a matrix phase with different stoichiometry, depending on the change in the initial composition of the powders, was established. An increase in strength, hardness, Young''s modulus, and crack resistance of the studied materials was observed with an increase in the content of zirconium nitride in the mixture of initial powders and a decrease in the porosity of the material. At the same time, a decrease in subgrains was recorded according to the results of X-ray phase analysis.Keywords
This publication has 48 references indexed in Scilit:
- Fabrication and investigation of novel hafnium-zirconium carbonitride ultra-high temperature ceramicsCeramics International, 2023
- Fabrication of Max Phase-Based Gradient Porous Materials from Preceramic PaperRussian Physics Journal, 2023
- Mechanical, thermal, and electrical properties of pressureless sintered SiC–AlN ceramicsCeramics International, 2020
- Effects of nitrogen addition and growth condition on the enhanced mechanical properties of transition metal carbides TMC (TM = Zr, Hf)Ceramics International, 2020
- Arc melting: a novel method to prepare homogeneous solid solutions of transition metal carbides (Zr, Ta, Hf)Ceramics International, 2019
- Preparation of ZrCN−TiCN solid solutions by spark plasma sinteringCeramics International, 2017
- Phase composition, microstructure and mechanical properties of ZrC coatings produced by chemical vapor depositionCeramics International, 2014
- A study of the densification mechanisms during spark plasma sintering of zirconium (oxy-)carbide powdersActa Materialia, 2010
- Transition Metal Carbides, Nitrides, and Carbonitrides2000
- Mechanical properties of hot isostatically pressed zirconium nitride materialsJournal of Materials Science, 1993