About Wave Nature of the Formation of Gradient and Microcomposite Zones Near Non-Metallic Inclusions During Laser Processing of the Steels
Open Access
- 2 October 2025
- journal article
- research article
- Published by Zeal Press in Journal of Material Science and Technology Research
- Vol. 10, 19-26
Abstract
The goal of this investigation was to research the wave nature of the formation of gradient and composite zones near non-metallic inclusions during laser treatment of the steels. The materials for investigation were commercial steels containing different non-metallic inclusions. The specimens of different steels were exposed to laser beaming on the installations GOS-30M. The research methods were applied: petrography, X-ray microscopy (MS-46 Cameca, "Nanolab - 7") and optical microscopy (Neophot-31) to study steel matrix near non-metallic inclusions and to identify of the inclusions. Nanohardness of the steel matrix near inclusions ("Nano Indenter II") was analyzed. Peculiarities of wave saturation of the steel matrix by chemical elements of non-metallic inclusions during laser action were investigated. It was shown the role of wave relaxation of stresses in the formation of cascade type structure of steel matrix near non-metallic inclusions. The features of the formation of gradient and micro composite saturation zones of cascade type in a steel matrix under conditions of abnormal mass transfer from nonmetallic inclusions during laser processing are discussed. It has been established that the formation of gradient saturation zones with a cascade and “spot” distribution of elements and nanohardness is due to the wave nature of the relaxation of thermal and deformation stresses near non-metallic inclusions at the time of laser exposure. The difference in the rates of abnormal mass transfer of chemical elements of non-metallic inclusions into a steel matrix at the moment of laser melting is shown, which is associated with different solubility and mobility of the atoms of alloying elements in liquid iron.Keywords
This publication has 15 references indexed in Scilit:
- Influence of Laser Treatment on the Strength of “Inclusion–Steel Matrix” Interfaces Under Plastic DeformationMaterials Science, 2017
- Possibilities of Transformation of Non-Metallic Inclusions and Inclusion—Matrix Interphase Boundaries at High-Energy Treatments of SteelsMetallofizika i Noveishie Tekhnologii, 2016
- Dislocation Mass-Transfer and Electrical Phenomena in Metals under Pulsed Laser InfluenceDefect and Diffusion Forum, 2015
- Laser Treatment of Steel Surfaces2014
- Zones of contact interaction in steel matrix near inclusions under the laser actionMaterials Science, 2011
- Melting and crystallization of nonmetallic inclusions and steel matrix in the course of laser treatmentMaterials Science, 2010
- To the theory of the anomalously high diffusion rate in metals under shock action: I. Basic equations of diffusion mass transfer upon plastic deformation of materialsPhysics of Metals and Metallography, 2009
- Mass transport in metals under intensive impulse reactionsJournal of Physics and Chemistry of Solids, 2001
- Structural effects near nonmetallic inclusions in laser treatment of steelsMaterials Science, 1999
- Screening properties of the erosion torch and pressure oscillations at a laser-irradiated target1991