pH and UVA real‐time data feasibility for monitoring aqueous PVA degradation in a continuous pilot‐scale UV / H 2 O 2 photoreactor: Experimental and statistical analysis
Open Access
- 4 May 2025
- journal article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (12) , 6056-6071
Abstract
The performance of a continuous pilot‐scale UV/H 2 O 2 photoreactor for the degradation of aqueous polyvinyl alcohol (PVA) is studied. The process variables include PVA feed concentration, inlet H 2 O 2 concentration, and hydraulic retention time (HRT), ranging from 20 to 100 mg/L, 2 to 115 mg/L, and 5 to 25 min, respectively. Interactive effects of the input variables on the percentage of total organic carbon (TOC) removal, residual H 2 O 2 concentration, and effluent pH are analyzed using Latin hypercube sampling (LHS), quadratic modelling, and response surface methodology (RSM) in MATLAB and Design Expert. The process analysis determined optimal operating conditions of 22 mg/L PVA feed, 15 mg/L inlet H 2 O 2 concentration, and 24 min HRT, yielding a maximum TOC removal of 51.51% and a residual H 2 O 2 concentration of 5 mg/L. Despite previous studies, online pH and H 2 O 2 sensors are used in the experimental setup. A key novelty of this study is the identification and validation of reliable online indicators for parameters that cannot be measured online, enabling real‐time process monitoring and control. Specifically, UV absorbance of PVA feed solutions at 254 nm (UVA) exhibits a strong dependence on the PVA feed concentration, making it a reliable online indicator for monitoring PVA levels in the feed. Additionally, indicating a linear correlation between effluent pH and %TOC removal, with an R 2 value of 0.9886, suggests that effluent pH could serve as a reliable real‐time indicator of process removal performance. These findings highlight the potential of real‐time monitoring and optimization of UV/H 2 O 2 systems in large‐scale wastewater treatment applications.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
- Toronto Metropolitan University
This publication has 39 references indexed in Scilit:
- Application of standardized methods to evaluate the environmental safety of polyvinyl alcohol disposed of down the drainIntegrated Environmental Assessment and Management, 2024
- Toward a Framework for Environmental Fate and Exposure Assessment of PolymersEnvironmental Toxicology and Chemistry, 2021
- Photochemical degradation of aqueous artificial sweeteners by UV/H2O2 and their biodegradability studiesJournal of Chemical Technology & Biotechnology, 2020
- Accelerated degradation of polyvinyl alcohol via a novel and cost effective heterogeneous system based on Na2S2O8 activated by Fe complex functionalized waste PAN fiber and visible LED irradiationChemical Engineering Journal, 2019
- Photochemical Kinetic Modeling of Degradation of Aqueous Polyvinyl Alcohol in a UV/H2O2 PhotoreactorJournal of Polymers and the Environment, 2018
- A New Adaptive Response Surface Model for Reliability Analysis of 2.5D C/SiC Composite Turbine BladeApplied Composite Materials, 2017
- An Effect of Salt Concentration and Inoculum Size on Poly(Vinyl Alcohol) Utilization by Two Sphingomonas StrainsJournal of Polymers and the Environment, 2017
- Photochemical Degradation of Aqueous Polyvinyl Alcohol in a Continuous UV/H2O2 Process: Experimental and Statistical AnalysisJournal of Polymers and the Environment, 2016
- Photoreactor scale-up for degradation of aqueous poly(vinyl alcohol) using UV/H2O2 processChemical Engineering Journal, 2014
- Adsorption and photocatalytic degradation of polyvinyl alcohol in aqueous solutions using P-25 TiO2Chemical Engineering Journal, 2011