The LHCb VELO Upgrade Module Construction
Preprint
Abstract
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 \mum thick, n-on-p silicon sensors bump-bonded to 130 \nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO$_2$ cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 $\mathrm{μm}$, more than 99.5\% of all pixels are fully functional, and a thermal figure of merit of 3 \mathrm{Kcm^{2}W^{-1}}$ was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022.
Keywords
All Related Versions
This publication has 13 references indexed in Scilit:
- Microchannel cooling for the LHCb VELO Upgrade INuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2022
- LHCb MiniDAQ control systemEPJ Web of Conferences, 2019
- High speed electrical transmission line design and characterizationJournal of Instrumentation, 2017
- The VeloPix ASICJournal of Instrumentation, 2017
- Clock and timing distribution in the LHCb upgraded detector and readout systemJournal of Instrumentation, 2015
- Performance of the LHCb Vertex LocatorJournal of Instrumentation, 2014
- A PCIe Gen3 based readout for the LHCb upgradeJournal of Physics: Conference Series, 2014
- VeloPix ASIC development for LHCb VELO upgradeNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2013
- Evaporative CO2 cooling using microchannels etched in silicon for the future LHCb vertex detectorJournal of Instrumentation, 2013
- The GBT-SerDes ASIC prototypeJournal of Instrumentation, 2010