G. Bogdanova
G. Bogdanova has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Leflat
CERN
6 shared publications - Agnieszka Oblakowska-Mucha
AGH — University of Krakow, Faculty of Physics and Applied Computer Science
5 shared publications - Chris Parkes
University of Manchester
5 shared publications - David Hutchcroft
University of Liverpool
5 shared publications - Eddy Jans
Nikhef National Institute for Subatomic Physics
5 shared publications - Karol Hennessy
University of Liverpool
5 shared publications
Latest Publications
- Open Access
- 6 August 2026
- Published by Springer Nature in Journal of High Energy Physics
- Vol. 2026 (8)
Production of Λ hyperons in 4.0A GeV and 4.5A GeV carbon-nucleus interactions at the Nuclotron
A bstract: The BM@N experiment (Baryonic Matter at the Nuclotron) is the first fixed-target experiment at the JINR NICA accelerator complex. In this work, data on the interactions of a carbon-ion beam with kinetic energies of 4.0A GeV and 4.5A GeV with C, Al, Cu, and Pb targets are used to measure transverse momentum spectra and rapidity distributions of Λ hyperon yields. The results are compared with the predictions of DCM-SMM, UrQMD, and PHSD transport models and with the Λ yield measurements in other experiments at similar collision energies.
- 6 August 2026
- Published by Springer Nature in Journal of High Energy Physics
- Vol. 2026 (8)
Open AccessProduction of Λ hyperons in 4.0A GeV and 4.5A GeV carbon-nucleus interactions at the Nuclotron
A bstract: The BM@N experiment (Baryonic Matter at the Nuclotron) is the first fixed-target experiment at the JINR NICA accelerator complex. In this work, data on the interactions of a carbon-ion beam with kinetic energies of 4.0A GeV and 4.5A GeV with C, Al, Cu, and Pb targets are used to measure transverse momentum spectra and rapidity distributions of Λ hyperon yields. The results are compared with the predictions of DCM-SMM, UrQMD, and PHSD transport models and with the Λ yield measurements in other experiments at similar collision energies.
- Open Access
- 13 August 2025
- Published by Springer Nature in Journal of High Energy Physics
- Vol. 2025 (8) , 1-36
Production of protons, deuterons and tritons in argon-nucleus interactions at 3.2 A GeV
Results of the BM@N experiment at the Nuclotron/NICA complex on the production of protons, deuterons and tritons in interactions of an argon beam of 3.2 A GeV with fixed targets of C, Al, Cu, Sn and Pb are presented. Transverse mass spectra, rapidity distributions and multiplicities of protons, deuterons and tritons are measured. The results are treated within a coalescence approach and compared with predictions of theoretical models and with other measurements.
- 13 August 2025
- Published by Springer Nature in Journal of High Energy Physics
- Vol. 2025 (8) , 1-36
Open AccessProduction of protons, deuterons and tritons in argon-nucleus interactions at 3.2 A GeV
Results of the BM@N experiment at the Nuclotron/NICA complex on the production of protons, deuterons and tritons in interactions of an argon beam of 3.2 A GeV with fixed targets of C, Al, Cu, Sn and Pb are presented. Transverse mass spectra, rapidity distributions and multiplicities of protons, deuterons and tritons are measured. The results are treated within a coalescence approach and compared with predictions of theoretical models and with other measurements.
- Open Access
- 1 June 2024
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 19 (06) , P06023
The LHCb VELO Upgrade module construction
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 μm thick, n-on-p silicon sensors bump-bonded to 130 nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO2 cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 μm, more than 99.5% of all pixels are fully functional, and a thermal figure of merit of 3 Kcm2W-1 was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022.
- 1 June 2024
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 19 (06) , P06023
Open AccessThe LHCb VELO Upgrade module construction
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 μm thick, n-on-p silicon sensors bump-bonded to 130 nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO2 cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 μm, more than 99.5% of all pixels are fully functional, and a thermal figure of merit of 3 Kcm2W-1 was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022.
- Top Cited PapersOpen Access
- 1 May 2024
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 19 (05) , P05065
The LHCb Upgrade I
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
- 1 May 2024
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 19 (05) , P05065
Top Cited PapersOpen AccessThe LHCb Upgrade I
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
- Open Access
The LHCb VELO Upgrade Module Construction
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 \mum thick, n-on-p silicon sensors bump-bonded to 130 \nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO$_2$ cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 $\mathrm{μm}$, more than 99.5\% of all pixels are fully functional, and a thermal figure of merit of 3 \mathrm{Kcm^{2}W^{-1}}$ was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022.Open AccessThe LHCb VELO Upgrade Module Construction
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 \mum thick, n-on-p silicon sensors bump-bonded to 130 \nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO$_2$ cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 $\mathrm{μm}$, more than 99.5\% of all pixels are fully functional, and a thermal figure of merit of 3 \mathrm{Kcm^{2}W^{-1}}$ was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022. - Open Access
- 1 October 2023
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 18 (10) , P10003
Measurement of thermal properties of the LHCb VELO detector using track-based software alignment
The thermal properties of the LHCb Vertex Locator (VELO) are studied using the real-time detector alignment procedure. The variation of the position and orientation of the detector elements as a function of the operating temperature of the VELO is presented. This study uses a dataset collected by the LHCb experiment during a VELO temperature scan performed at the end of LHC Run 2 (October 2018). Significant shrinkage of the VELO modules is observed at the operating temperature of -30°C compared to the laboratory measurements on a single module taken at a range of temperatures from +45°C to -25°C. The thermal shrinkage expected from the extrapolation of laboratory measurements to lower temperatures, and the results of this alignment study are in good agreement.
- 1 October 2023
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 18 (10) , P10003
Open AccessMeasurement of thermal properties of the LHCb VELO detector using track-based software alignment
The thermal properties of the LHCb Vertex Locator (VELO) are studied using the real-time detector alignment procedure. The variation of the position and orientation of the detector elements as a function of the operating temperature of the VELO is presented. This study uses a dataset collected by the LHCb experiment during a VELO temperature scan performed at the end of LHC Run 2 (October 2018). Significant shrinkage of the VELO modules is observed at the operating temperature of -30°C compared to the laboratory measurements on a single module taken at a range of temperatures from +45°C to -25°C. The thermal shrinkage expected from the extrapolation of laboratory measurements to lower temperatures, and the results of this alignment study are in good agreement.
- Open Access
- 1 June 2018
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 13 (06) , P06008
Mapping the material in the LHCb vertex locator using secondary hadronic interactions
Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties of a reconstructed secondary vertex and its constituent tracks, a p-value can be assigned to the hypothesis that the secondary vertex originates from a material interaction. A validation of this procedure is presented using photon conversions to dimuons.
- 1 June 2018
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 13 (06) , P06008
Open AccessMapping the material in the LHCb vertex locator using secondary hadronic interactions
Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties of a reconstructed secondary vertex and its constituent tracks, a p-value can be assigned to the hypothesis that the secondary vertex originates from a material interaction. A validation of this procedure is presented using photon conversions to dimuons.
- 1 March 2016
- Published by Pleiades Publishing Ltd in Physics of Atomic Nuclei
- Vol. 79 (2) , 144-154
Measurement of the production cross section for charmed baryons in proton–nucleus interactions at 70 GeV
The results of an analysis of data from the SERP-Е-184 experiment devoted to studying mechanisms of the production of charmed particles in proton–nucleus interactions at 70 GeV and their decays are...
- 1 March 2016
- Published by Pleiades Publishing Ltd in Physics of Atomic Nuclei
- Vol. 79 (2) , 144-154
Measurement of the production cross section for charmed baryons in proton–nucleus interactions at 70 GeV
The results of an analysis of data from the SERP-Е-184 experiment devoted to studying mechanisms of the production of charmed particles in proton–nucleus interactions at 70 GeV and their decays are...