Numerical Analysis of Bearing Capacity of a Ring Footing on Geogrid Reinforced Sand
Open Access
Abstract
A ring footing is found to be of practical importance in supporting symmetrical constructions for example silos, oil storage container etc. In the present paper, numerical analysis was carried out with explicit code FLAC3D 7.0 to investigate bearing capacity of a ring footing on geogrid reinforced sand. Effects of the ratio n of its inner/outer diameter (Di/D) of a ring footing, an optimum depth to lay the geogrid layer were examined. It was found that an intersection zone was developed in soil under inner-side (aisle) of ring footing, contributing to its bearing capacity. Substantial increase of bearing capacities could be realized if ratio n of a ring footing was around 0.6. Numerical results also showed that, bearing capacity of a ring footing could increase significantly if a single-layer geogrid was laid at a proper depth under the footing. Similar contribution was found if a double-layer geogrid was implemented. However, such increases appeared to be rather limited if a triple-layer geogrid or a four-layer geogrid was used. A double-layer geogrid was recommended to increase the bearing capacity of a ring footing; the depth to lay this double-layer geogrid was also discussed.Keywords
This publication has 13 references indexed in Scilit:
- Numerical study of ring and circular foundations resting on fibre-reinforced soilInternational Journal of Geotechnical Engineering, 2019
- Behavior of ring footing resting on reinforced sand subjected to eccentric-inclined loadingJournal of Rock Mechanics and Geotechnical Engineering, 2018
- Bearing capacity computation for a ring foundation using the stress characteristics methodComputers and Geotechnics, 2017
- Strength and Bearing Capacity of Ring Footings Resting on Fibre-Reinforced SandInternational Journal of Geosynthetics and Ground Engineering, 2017
- Internal Stability Analyses of Geosynthetic Reinforced Retaining WallsProcedia Engineering, 2014
- An experimental evaluation of the behavior of footings on geosynthetic-reinforced sandSoils and Foundations, 2013
- Bearing capacity of square footings on geosynthetic reinforced sandGeotextiles and Geomembranes, 2009
- Experimental and numerical investigation of the bearing capacity of model circular and ring footings on reinforced sandGeotextiles and Geomembranes, 2003
- Bearing Capacity of Circular FootingsJournal of Geotechnical and Geoenvironmental Engineering, 2002
- Bearing capacity of plane-strain footings on layered soilsCanadian Geotechnical Journal, 1997